why my Add Ins keep unloading themselves in between sessions of Inventor. I have seen it happen when my Inventor crashes to desktop, but lately it's every time I open the software.
Only thought I have is that I'm running the Job Processor on this machine, and from time to time it also suffers errors processing visualization files. Could this be causing my Add In settings to crap out when I close Inventor?
We prefer to detach all xrefs when exiting a base file instead of unloading them. Is there a way to have autocad remember which xrefs were used in the base file so that they can be reloaded all at once next time.
View 4 Replies View RelatedAn animator has been getting a crash when unloading a reference in some of our scenes. When I take the same scene and try the same unload-reference operation, it works fine for me without crashing.
I've attached the crash log from the animator's machine.
We're both on Maya 2013. I'm on Windows 8, he's on Windows 7, in case it's relevant. We're using the same set of custom plug-ins.
Note that we're not using nested references - this is a top-level reference that we're trying to unload.
I noticed this in the online readme file for Maya 2014: MAYA-19363 Unloading reference node may cause Maya crash.
If so, is there a workaround for Maya 2013 till we all move over to Maya 2014?
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedCan't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies View RelatedUpgrading to a new computer.
1. What is the best CPU to use for Inventor between the i7 and the a Dual Xeon System
2. Would 32GB of memory easily cover all modelling such as assemblies?
3. Any advantage of having 2 x SSD instaed of 1 x SSD
4. Looking at the Nvidia GTX690 graphics card....this should be a good card
Is there a program that can make stp files from our inventor models? Our purchasing department wants to do this task for our vendors and they don't want in have a full version of Inventor to do it.
View 6 Replies View RelatedSo I installed TD Inventor Professional 30-Day free trial and I downloaded the installer and went through the download of the installer process and it made an autodesk inventor folder on my desktop. I click on it and it takes me into the C drive under the autodesk file Inventor 2012 TestDrive and has an Application called TDSetup. Once I click on it it does a load wheel then nothing happens.
I can't seem to find a solution and I just installed DirectX.
Inventor on a touch screen style PC, and if so... does it work? This hardware looks like it would be fun to work with, but I don't know if it's quite there yet for CAD work.
View 7 Replies View RelatedHow to set off the trim inventor does when one dimensions cross another one?
View 4 Replies View Relatedwe modeled prototypes of trains (locomotives) in 3dsMax, these models will be used to produce molds and thumbnails of these, you must give the producer STP files, max does not export these files, and we have exported in various formats supported by some programs if exported STP, eg Inventor, we have exported files are STL, oBJ and DWG, so far so good, all save the parts or layers without problem.
The problem comes when exporting from Inventor to STP, nothing happens, the STP file is as if you were empty, there is nothing ..
I have attached the DWG file, if possible, have 17 CAD models for export to STP.
I would like to know how can i create or add an UOM. (for example : 25 per box) in my BOM.
View 1 Replies View RelatedI'm new to inventor, used it to design a computer case of my own, so now that I got all of my parts in ipt I need to convert them to dxf in 1:1 scale.
What is the easiest way to do that? I found some info here [URL]... but in the Environments tab I don't have any ''AEC Exchange''.
Oh and another thing, after sketching all my parts I ''deleted'' the dimensions from the view, so is there any way I can make them show up in that dxf because I will have to send the dxf's to someone who will laser cut the parts, so dimensions have to be shown of course, or do I have to add them one by one?
Using Inventor 2012 Premium, this problem didn't exist in 2011.
When I click "I"->New(small arrow)->Part. All dimensions are in cm.
If I instead click "I"->New and choose the Part template all dimensions are in mm, as it should. I have two .ipt-templates (standard (mm) and sheet metal (mm))
My college went through all templates we have and no one uses cm.
How to set miter gap 0 mm in Inventor 2014...?
View 2 Replies View RelatedI need to export some of my files directly to a dxf format, or failing that dwg. There is no such extension available to me in either "Save As" or "Export".
View 3 Replies View Related`How can I extend the red "peg" in the attached model, by 8 mm either side? (I created it as a sweep)
View 3 Replies View RelatedI am trying to create excel files out of BOM for an assembly that contains a step file from customer.
That step file is a subassembly that contains several files.
So now my issue is if i could modify the BOM so that i add several rows. Basically i need to add in bom rows that are pointing to inexistent parts. Besides creating a subassembly and add there several empy parts is there any other way?
im wondering if it is possible to convert a 2D dxf to 3D in 2012 inventor? I couldnt do after I downloaded the updates for 2D to 3D conversion. I wonder if such a conversion is only available for 2D DWG files
View 6 Replies View RelatedI am using 2013 inventor and revit. I am trying to use this BIM exchange in inventor and I am try to by creating a simple part/family with a couple of different sizes in a table. Everything looks good in inventor as far as the table having different size and when I activate one it changes the part. When I export I am going to tools, BIM exchange, hitting export and away she goes. There is only one export button and everything is pretty simple to understand. So inventor as far as I know, is good.
Now when I bring it into revit as the ASDK format from export with BIM exchange as I am getting is the model with whatever view happens to be active. I am not getting the table nor the parameters I set up for manually changing the family.
I have done some research and noticed that in previous verisons you needed to export the table in inventor after that model, but I am not seeing that option anywhere.
So my question is, am I missing something and you can no longer export parametric parts from inventor to revit, or is there another set I am missing either in the inventor setup or the import into revit?
I've opened up Inventor 2013 and clicked 'new' but no templates have come up. I went to my templates file in my documents and there wasn't any there. Where can I get the templates?
View 6 Replies View RelatedCPU / Computer Case fan - the spindle & blades only. For a better picture, it looks like this: [URL] ...
How do I design the blades?
How do I bend the blades?
How do I multiply the blades to make it repeat in circle?
P.S. The 3ds max discussion Area is locked, from what I've heard. I want to start creating GPU boards (which I already know how to do). BUT, I don't know how to design a Cooling Fan properly... which function in 3ds MAX... ???
I'm running Design Suite Ultimate 2012, windows 7 64bit, I can launch IV 2012, but I can't seem to see my tool bars...
View 9 Replies View RelatedProgram: Inventor 2012
Type: Sheet Metal Mode
1. Right click my Flat Pattern
2. Select "Export Face As"
I select the option and I do FOUR separate test(2000,2004,2007,2010) and save each on accodingly
part_2000.dxf
part_2004.dxf
part_2007.dxf
part_2010.dxf
when I drag each of them into "AutoCAD 2009 - English Version 2" I get this
Unknown value "AC1024" encountered in drawing version.
Invalid or incomplete DXF input -- drawing discarded.
I understand 2010 not able but the last 3 from before 2009. Am I missing something here??
Inventor 2012
I am trying to export an idw to pdf and i get the error message "HGPMinchoE". I uninstalled inventor and reinstalled, but did not fix error. I am using Inventor Professional 2014.
View 4 Replies View RelatedFor some reason when I export .pdf Adobe Distiller opens up automatically. How to get preview (for mac) to open instead?
View 2 Replies View RelatedI am wondering if there is a way of exporting an existing IDW created in Inventor to DWF format without having to physically open the IDW in Inventor ? I have a list of IDW's and some of them are referencing large assembly and take a long time to open and it would be better if I could do a batch export outside the Inventor environment.
View 4 Replies View RelatedIs it possible to convert a DWF to an .ipt (or .iam) file so that I can use the base DWF geometry in an Inventor assembly?
I have a dwf file that a customer sent me that is ~1.5 Mb. I asked to get it in a usable format and they sent a .stp file that is 23.3 Mb and Invetor just hangs (not responding). I let it try to load a few times for several hours without any luck.
