Is it possible to convert a DWF to an .ipt (or .iam) file so that I can use the base DWF geometry in an Inventor assembly?
I have a dwf file that a customer sent me that is ~1.5 Mb. I asked to get it in a usable format and they sent a .stp file that is 23.3 Mb and Invetor just hangs (not responding). I let it try to load a few times for several hours without any luck.
im wondering if it is possible to convert a 2D dxf to 3D in 2012 inventor? I couldnt do after I downloaded the updates for 2D to 3D conversion. I wonder if such a conversion is only available for 2D DWG files
View 6 Replies View RelatedUsing Inventor 2014.
I was going to send autocad drawing to our client.
I found that converting IDW to DXF/DWG doesn't always get 1:1 scale on the DXF/DWG drawing.
In other words, some drawings are fine and the others are not.
It was set correctly in "Options..." by selecting "Base View Scale - Model Space".
There is nothing wrong with IDW files and all these files are using same template.
Need converting my autocad mech. 2014 (2d) to Inventor 2014 (3d).
View 3 Replies View RelatedI have this model thats done in Acad but when i try to convert it not all the parts are there.
Inventor 2012 Pro
Windows 7 64 bit
Core I5 2410M processor | GeForceGT 525M graphics card | 8G RAM
I am working with a few engineers and they want me to convert the idw drawing file to a vsd "Visio" file for there redline process. They would like to be able to play with the line work in Visio. Is this possible?
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800
When you open Inventor 9 drawing in the Inventor 11. It is possible to convert partslist by clicking right mousebutton above partslist and selecting "convert" from the popup menu .Is it possible to do this partslist convert in the VBA?Is this partslist convert supported in the IV 11 or IV 2008 API?
View 3 Replies View RelatedI have a medium sized assembly that I was working with. I decided I needed to create a weldment, so I stripped the assembly of all subassemblies, individual parts, etc and saved it as a different name. However, Inventor will not allow me to convert it to a weldment. That optoin is greyed out.
The only thing I can think of is I have a base part that I have hidden. It is used to drive the assembly. Perhaps that is causing a problem, but I cannot remove it or all associativity will be lost. I deleted it temporarily to try, but did not save it. The convert to weldment option did not appear after I deleted it.
I have some Inventor drawing files that a client wants in an AutoCAD 2007 format. Ever time I try to convert the .idw to an autocad .dwg I get this message, "Problems encountered while saving the document." So far this is what I've tried:
1. Save copy as -> Save as type: AutoCAD DWG files (*.dwg) -> error message
2. Export to DWG -> Save as type: AutoCAD DWG files (*.dwg) -> error message
I am able to save as an Inventor DWG but I need it as an AutoCAD DWG... I think. I read somewhere that Autocad 2007 won't read the DWG unless its in an AutoCAD DWG format.
I am running Inventor 2014 on a Windows 7 64 bit machine.
I'm looking for a way to convert the iproperty value "volume" into length from known values in the part. I have an assembly which consists of 20 different typs of sheets which are rolled out in certain patterns. The width and depth of the sheet are known, and I would like to use the volume to find the length. The assembly is linked to an excel file so the values will change based on certain parameters. I'm using this as a check to make sure there is no error from the spreadsheet.
View 7 Replies View RelatedI have a drawing of a map full of polylines and some splines. I want to somehow select or show only the splines for then to convert them into polylines to make them ready for laser printing.
The drawing has thousands of lines so selecting one by one to see if its a spline will take forever.
I've received an STL file from a client which I can't edit or interrogate in Inventor LT. What's the best way to convert this into a solid?
View 1 Replies View RelatedA quick search of the forum didn't reveal answers to my elementary question so here it is. I'm working to get some design components manufactured overseas. The manufacturer uses Pro/E but in one of their very cryptic emails they told me to convert all files to .stp and .igs files. What I need to know is which of these file formats applies to assemblies and which applies to part file. In other words, when I open a part file, should I export it as a .stp file, or a .igs file?
View 4 Replies View RelatedIs there any possibility to convert several dwg files to pdf?
Project with approx 4000 inventor dwg files.
Using Inventor 2012 .
I had made several "stickers" with some draws and colors with Autodesk Inventor, now i have a problem... my supplier can't open dwg files (2D)...how can I convert a ipt file to AI or CDR files?
(these are the extensions for the programs that they work...)
Autodesk Inventor PRO 2014 - Win8 x64 - 16Gb - GTX 560
Can we direct convert 3d inventor drawing to 2d autocad drawing but components in the drawing must be in the block condition? (For easy to modify)
View 7 Replies View Relatedi need one ilogic or macro for sketch. i have one sketch in this sketch having lot off dimensions so all are having upto 4 decimal place values.but i need rounded value like above .51 is 1 and below .49 is 0 like this .
simply like this 4.56 is 5 ans 4.49 is 4 like this type of rounded value i dont want precision value.like nearest to after coming single digit number.
Necessary to convert list of material of the assembly (IAM) into archive pdf. (bill of Material)
View 3 Replies View RelatedI just was upgraded to Inventor 2014. I've got an assembly that I want to convert into a weldment. The "Convert to Weldment" icon doesn't appear where it used to be in 2013. I cannot find a way to make it pop up. Is it no longer possible to use this button to convert a an assembly into a weldment?
View 5 Replies View RelatedHaving problems trying open/convert a *.PRT file. ny "switches" in the OPEN/OPTIONS I may have to change other than default settings?
View 6 Replies View RelatedIs there any way to convert a surface to solid?
View 4 Replies View RelatedI followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
View 3 Replies View RelatedHow to convert Inventor assembly file to FBX file?
View 6 Replies View Relatedhow I change an inventor drawing to an autocad file. I can change it for idw to a dwg file and then open it in autocad, but I cannot edit it once i am in autocad, this prevents me from sending it through to a CAD/CAM scanner for manufacture.
View 6 Replies View RelatedI have just modelled a part with some faces and tried to convert to sheet metal to have inventor make the bends between the faces. However when trying to convert to sheet metal i get the following error message (Autodesk Inventor Professional Tip) - "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed."
As the picture show the part only has 1 solid. Even when deleting all features except the "base" face I get the same error message or Tip as Inventor calls it.
We had a CAD designer create a 3D drawing for us. I am pretty sure he did it in Inventor. We only have Inventor LT here. I am so lost its not even funny and my boss is breathing down my back to get this done. How in the heck do I convert the .dw file to a .step or .iges file!?
View 1 Replies View Relatedi found same topics as my, but i didnt find solution.
Is there any way for mass convert idw files (not same format - A4,A3,A2, ...) to pdf ?
I tried task manager, but i dont have some account for it.
When i convert idw (drawing) to dwg (AutoCAD) with Save as -> Save Copy as . I have problem with nuts
Inventor Professional 2013 update 1
see picture
For example - I have to do this:
Open one *.idw file press ctrl+p, set A4 or A3 and then click "ok" button and "save" button (using PDF Creator)
Next step is same - open another *.idw file and save it as pdf, but another *.idw file can have 2 sheets, so I have to open second sheet and do it same thing.
So i have for example
workfolder/part-123.idw
workfolder/part-123.pdf
and i need do this for every *.idw file (including their sheets). So its really long time and i dont have time.
Is there a simple way that would allow - for example to open a folder and convert it all in idw files to PDF automatically ?
Micro Station and using imported Inventor files?
Part of of the contract on our current job requires me to export my Inventor model out to a generic .stp format, so our client can use it at their end. Apparently they are using Micro Station, not sure what version yet.
My first attempt I was able to successfully create the .stp file, but it took about 15 hours and was 1.2 gb in file size.
I attempted to open it on another Inventor machine to check the conversion, but after 4 days it was still working on it....
Part of the problem was I just selected the default options when opening the .stp file, which have "import into repair environment" and such on. But this was in Inventor, does Micro Station have similar options? I have yet to try it with these options off. But I'm guessing it will still take way too long to open.
I think my only option is to convert several levels of detail into separate .stp files, not sure on file size of those as of yet. Even though the origins should remain the same, I will have a constant reference object of some kind so the end user can assembly everything correctly....
How to convert 3d dwg files to solid bodies ?
View 6 Replies View Related