AutoCAD Dynamic Blocks :: Array Count Within A Block?
Feb 28, 2012
I'm attempting to use Excel to take data from a drawing and give me purchase and cut lists.
I have successfully pulled the overall measurement from my dwg, and inserted it into a workbook. What I'd like to do now is to have a count of how many times the array function went into effect. For example, attached is a file containing a block called platform. When stretched, it inserts toggles every 2'. When I export the information from my dwg, I'd like for the program to not only extract the length, but how many toggles were inserted for each platform.
View 1 Replies
ADVERTISEMENT
Nov 6, 2007
i made a simple little chair block , that can be dynamically pulled into theatre seating.
I am trying to get the "Count of Objects" revealed as mtext or an attribute in the block.
It seems that doing area mathematics on the total array size divided by the individual column/row sizes will give me the correct count.
Any recommendations on the "Field" that will work with this?
View 6 Replies
View Related
May 5, 2012
I have a block of a roof screen. What i want to do is to stretch it & have the slats on the front & also the supports on the rear array @ different intervals. The slats on the front would array every 6-1/2" (The slats are 5-1/2" wide with a 1" gap). The supports array every 4'-0". I have tried to do this multiple ways with mixed results. How to get my desired outcome. I am enclosing my block.
View 5 Replies
View Related
Jul 31, 2012
I need this block to do the following:
1. Move the right piece so it ends at 3', 4', & 5'.
2. the move right hook and 'backing' to stretch/copy (or array) so it adds a hook to the right and fills in the backing.
so this means that a 3' gets 4 hooks, 4' gets 5 hooks and 5' gets 6 hooks.
3. the block as shown is the smallest configuration with 3 hooks.
I could just set up a visibility and draw each one at it's appropriate length but I'm trying to keep this simple block to a min size. If all else fails, that's the route I'll take.
I've tried a couple different configurations and I keep getting duplicates or the end piece doesn't move the correct distance.
View 3 Replies
View Related
Nov 27, 2013
I have a block that when I extend it, a new 10' section is added. It will only add the 10' piece (array). What I am looking to do is find a way so that once I hit a total distance have it switch the part that it adds. So I have like a rail, I keep adding these 10' pieces and then once it hits 40' I want it to add the end piece which is different.
View 1 Replies
View Related
Dec 19, 2013
I've made this block . when i rotate the vertical line I need to add lines every 15° as you see in the image, i've seen that polar array is not possible in the dynamic blocks.
View 8 Replies
View Related
Feb 6, 2013
I'm trying to create a window block with a grille. I've created the block and the horizontal grilles. What I'm having a hard time with is creating the vertical grilles. I would like to set up an array that would take the glass width, divide by 12, round up the value to get the number of vertical sections. Here's the code that I've figured out:
(W/(ceil(GW/12)))
W=Width
GW=Glass width
How do I set up an array with this formula?
View 2 Replies
View Related
Nov 21, 2013
I have created a small dynamic block that manipulated some lines (attached). The properties table allows s1, b1, b2 and c to be modified. The white lines control the cyan and red.
The red-lines have an array within (green lines) which I want to lock to the blue line parametrically. The array may be dragged physically but thats not the point; its need to be automatic (Revit style).
View 3 Replies
View Related
Nov 24, 2013
I have been trying to get my 2D parametric model to work and am having trouble with the array.
I attach the model. When I alter the span in the properties palette, I want the array to follow. I do not want the grip to show as I eventually want to program the dimensions externally.I do not mind using AutoLisp or .net if I need to control the model using code.
View 9 Replies
View Related
Dec 17, 2012
Lisp routine to count the number of dynamic blocks of a specific name ("FD") by windowing an area of the drawing. I have a routine that I've been using to accomplish this, but i don't understand why it doesn't count dynamic blocks.
(DEFUN C:LOCATEFD(/ BLKNAME BLOCKSET TOTAL)
(SETQ BLKNAME "FD")
(PROGN(SETQ BLOCKSET(SSGET(LIST(CONS 2 BLKNAME))))
(IF(= BLOCKSET NIL)
[Code] ....
View 9 Replies
View Related
Oct 30, 2013
I have been working on a dynamic block that need to look like the attached jpg. Basically it needs to be able to stretch up to 50'-0" but in ten foot segments (part size limits) +/- an additional but in 1 foot increments.
I've got two blocks that will either array or stretch. But have not been able to get it to match the actual requirements. I have attached my current block attempt. Also as you can see from the jpg, the support posts usually alternate as well and I haven't figured that out yet either .
View 9 Replies
View Related
Apr 3, 2012
Is it possible to modoify an array on the fly?
I've been playing around with an incrementing block, and have figured that you can get an attribute block to report its position relative to its origin inside a block,and have it report that back. If you can do that and do formulas, you could then have that creating an incrementing number. If however you were to want to use such a block for counting stairs or alternatively counting car parking spaces, and want to get the spacing of the array just right, you seem to have no choice in the size of array other than when editing the block?
Attached is what I have simply created. No calculations, just reports the position in X, but shows the possibilities. Stretch the text out and you get more numbers.
Time consuming to create alternative is to have to define each number object individually and do a move action, based on something like an object being stretched (length of stretched object becomes part of a multiplication factor for a move action). See Numbers increasing block attached. More precise but takes a while to create, and is limited to the numbers shown.
View 7 Replies
View Related
Dec 14, 2012
I'm using a 2-2D recangles that are 5'x16" and 10'x16" and I am trying to figure out how to array this in one direction, to the left, but have the array on 5' increments. Also, within each rectangle I am needing text to show which size it is.
e.g. If I drag the array to the left more than 10' but less than 15' it will apply 15'.
View 7 Replies
View Related
Jun 3, 2013
I have been looking for about three days on how to do the array with-in the dynamic blocks, but have been very unsuccessful. What I am trying to do is make a TJI joist that you can have a look up table that is classified as 'offset' so that you can eventually strech the joists to standard spacing, and use the array to work. So that I dont have to have a ton / zero visibiliy states.
View 1 Replies
View Related
May 22, 2013
i work at a small structural firm and am about the most experienced cad user here, which isn't saying much. I have never wrote any LISP's or anything, but have created many dynamic blocks and have edited some programing my boss got from a previous employee for adding dropdown menus with blocks/layers/etc. Just so you know my level of knowledge when it comes to answering my question. Also I am limited to using 2009 but other co-workers have up to 2013 so i would like this to work for all users. And i have done a bit of research but based on everyone elses level of knowledge am finding a lot of conflicting info and solutions that, to me, are in another language.
So I have a table that is created using polylines and text. It's a funky shape and AutoCAD's tables are a pain for it. i have created a dynamic block where i can array the rows down and the columns left. The issue is, i would like the test to come with each row, but still be editable once the block is done. I have figured out if row one is composed of 5 columns of text put into a single attribute, it is fine. But once you use the array action, to say 3 rows (including now 3 sets of attributes) they are not editable. So what is the work around, if there is indeed a work around?
the two option i see are to only array the rows and columns and left the text outside that block and manually copy it done to how ever many rows the user needs.... Or to have 2 blocks come in together, one as described before, and the other which just arrays the text and then i explode it to edit each line.. but then if you later choose to addd another line you would be left with doing that manually anyway..
View 2 Replies
View Related
Aug 12, 2013
I'm trying to create a block for angled handicapped parking stalls.
I used an array chained to a stretch in order to increase the number of stalls. It worked but for some reason it does not work in all of my visibility states. In some visibility states the array and stretch do not stretch together. The block should end with a stall but some end with a line and no stalls above it.
I attached a drawing with the blocks. The block named "STALLS-60-HANDI" it works correctly except in visibility state 9' and in "STALLS-60-4space Handi" it only works in visibility state 10'.
rename to dwg . fire wall would let dwg posting
View 4 Replies
View Related
Mar 16, 2012
Started to play with dynamic blocks now got my head around stretch and tables but I'm looking to use the array command
this is what I want to try to achive
I have a dynamic block which has a array command in it so by simply pulling on the arrow the block will array horizontally giving me multiple items side by side
what I want to do is count the array example if I insert the block and and array to say 12 items side by side then I want to get the value 12 placed into a block attribute which is part of the dynamic block
I can then pull this data out of the drawing into spreadsheet so I can then create a purchase list of items
My immediate thought was to divide the the total length by the width of the item to get me a count but I don't know yet how to get this to work in the dynamic block
View 6 Replies
View Related
Sep 25, 2009
I've been trying to create a stair block that will automatically adjust the riser height to to suit the total vertical rise of the flight, but am having issues.
I drew two 'tread/riser' Plines, and constrained the daylights out of them. By stretching the grip for the 'Total Rise' constraint, the risers adjust nicely, while the treads remain at their desired 11" depth.
My problem is that when I try to create an array of the tread/riser, (using a linear parameter aligned with the slope of the stair) I can't get the 'column' width to change as the risers change height. Instead the value remains constant, and the arrayed copies don't connect with each other.
Any way either to fix this so that that the copies connect 'head-to-tail'?
View 9 Replies
View Related
Nov 29, 2012
I have created an elevation of a railing with stretch and array actions, however I have not been able to figure out how to center the array'd picket on the top rail. I've added a move action to the main picket in order to manually center after the railing has been stretched between the two posts...however I'd love to have this automatically centered.
(I originally thought I could have the main picket stretch at 0.5 (so it would be centered), then array in two directions, however there is no angle option on an array paramater).
View 8 Replies
View Related
Aug 25, 2011
I am trying to create a block that has a stretch and array command, but I would also like to rotate each arrayed item indvidually. However I cannot select the rotate parameter as part of the array function, so the block end up only containing one rotate grip.
View 2 Replies
View Related
Sep 28, 2012
It seems like this should be easy but it's not. I have a block with multiple components. I want them to array sequentially as I drag the grip. First one component, then the next, then the next. What I get is all 3 at once when I drag the grip far enough. I tried 3 separate linear parameters with their grips stacked but that didnt work either. What I have attached is a very simplified version of what I want, but I think once I get the concept it will be easy to elaborate on.
View 9 Replies
View Related
Nov 21, 2013
I'm currently creating blocks for our office library. One of these is a grille with some apposed blade dampers on it. I'm trying to set up an array that will duplicate the apposed blades as I change the length of the grille. However, it will only copy the blades in pairs, not singly one after the other. Ie, the blades are 100mm apart, and in a / pattern meaning that each instance of / or 'should' duplicate every 200mm. Except when I lengthen the block by 200mm it won't duplicate until I've gone double the distance (400) when it gives me both / and .
View 8 Replies
View Related
Apr 21, 2011
I have a dynamic block (attached) for our single line schematics. It works great, but there's a piece missing. The text in the file (In / Out) I would like to have insert with the block, but it needs to be editable, so it can't really be PART of the block... if that makes sense.
If at all possible, I'd like to have the text array down when you stretch the block...
View 9 Replies
View Related
Feb 3, 2012
In the attached dwg, I have a dynamic block "Platform" which is used several times. I have an adjustable length, with the array set to repeat the toggles (end view of 2x4) every 2', not including the last 6". That works perfectly, except one thing. "Distance1" is the distance of the parameter, because this was the only way that I found to stop the array from showing up within 6" of the last toggle. When I insert "Platform," and click the arrow to stretch it, I can type in the distance desired minus 6", and I'll get the correct length of platform. However, I'd like to be able to type in the actual length, and have the array work appropriately (the same way it does now).
Then, I'd like to create a custom toolbar that has a button to click which will insert this platform and ask me what the length of the platform should be (the entire distance). After specifying an insertion point, the block will insert at the correct length, with the appropriate toggles.
Here's what I'd like to do with it: using datalink, I'd like to count the following: how many copies of each length of platform is in the drawing, with toggle count and length of platform specified. I have already figured out the datalink to get the value of "Distance1", it's only the issue with the toggle count that I'm trying to figure out.
View 0 Replies
View Related
Aug 9, 2012
I've spent a day and a half coming up with a way to make this dynamic damper block work. Now, I need to fig out how to get every other blade to rotate 90°. I have attached a file with my block and an example of what I need to make it do. I’m running AUTOCAD 2009 LT if you need to know.
View 2 Replies
View Related
Apr 2, 2012
lisp to count dynamic block including total length.
View 9 Replies
View Related
Dec 6, 2007
i'm trying to do a polar stretch and array for rigid insulation. RIGID2.dwg is my best option. but as you can see in the jpg, the first line should have arrayed already, because the gap is over 2". i tried to follow the instruction someone used for the clothes hangers URL.... and it resulted in RIGID.dwg, with the lines rotating off the main line.
View 9 Replies
View Related
Oct 16, 2011
Am I missing something or is there no way to control array action spacing with formulas or user parameters?
View 3 Replies
View Related
Jan 23, 2014
I'm trying to create a dynamic block for a schedule to satisfy an engineer's request. The intent is to insert this block with the text for the schedule, then array the rows for as many fixture type as we may need. Then copy the text down and edit as needed.
I've got the array set up, but when I drag the array, the first array increment shows up, but the row of the schedule does not. It is not until partway through the second increment that the row shows up, but it appears with a gap between the first and second row, so something is wrong with the offset or origin... I'm not sure.
On another post, distance needing to be set in the Array Action Properties and not just under the parameter. I don't understand where this is.
View 2 Replies
View Related
Dec 4, 2013
I'm trying to create a Dynamic Block of an 3/4" x 3/4" aluminium angle with holes:
Depending on the length the number of holes will vary.
The distance between each holes need to be somewhere between 8" and a maximum of 12".
The holes must be centered and start from 1 1/2" up to 2" from each ends.
Each distance must be not more precise then 1/16" (no rounded off dimensions)
I'd like to simply drag the handle of the linear parameters (No lookup or visibility for 2 hole, 3 holes, 4 holes etc.)
View 9 Replies
View Related
Sep 30, 2013
How to create dynamic block with array action in both X and Y direction? And I have some conditions there like number in horizontal and number in vertical directions, but on exact distance (like 5 elements on 20 cm).
View 1 Replies
View Related
