I have a block which I want 2 visibility states. VS1 and VS2 share some objects and not others. I have a linear parameter in each which I want to do a stretch action on. The stretch action in each visibility state acts upon entities both shared and unshared between VS1 and VS2. This doesn't seem to work..
View 2 RepliesI'm trying to create a block for angled handicapped parking stalls.
I used an array chained to a stretch in order to increase the number of stalls. It worked but for some reason it does not work in all of my visibility states. In some visibility states the array and stretch do not stretch together. The block should end with a stall but some end with a line and no stalls above it.
I attached a drawing with the blocks. The block named "STALLS-60-HANDI" it works correctly except in visibility state 9' and in "STALLS-60-4space Handi" it only works in visibility state 10'.
rename to dwg . fire wall would let dwg posting
usage of dynamic title blocks with visiblity states and defining page setup override templates which use same for quick plotting using sheet sets.
I have attached a simple dynamic block that I built which is the outter frame of our company title block, it is designed to allow users to quickly switch between Landscape and Portrait orientations.
The problem I am having is when I go to define page setups for my Sheet Set Page Setup Override Template I am unable to use the "Extents" option with auto-center because the "Extents", as defined by the page setup, includes ALL objects in the paper space regardless of visibility, so my title block ends up being centered in a stupid way if that printing configuration is used.
The only solution I have found is to use the "Layout" option when defining page setups, but this option produces other issues in other ways when printing. I don't want to use the "Window" option either for the potential for users to be using the page setup overrides to print drawings using different paper sizes or drawings that were not originally created using the current template the override is designed to accomodate.
Is there perhaps a system variable that defines whether invisible objects are included in the "Extents" setting in the page setup? I'm sure you'll all agree that Extents is the way to go in this situation, but it is not performing exactly as required.
So, while it wasn't common before, I am finding a need for multiple visibility states in blocks more and more these days, since AutoCAD can't do it I was wondering what work around and tricks people had come up with??
View 9 Replies View RelatedI use the RIBBONS when using ACAD, when creating Dynamic Blocks with Visibility States I am able to add, rename etc the states, but when I need to tell ACAD what to hide and what to show in each state I cant seem to locate the button within the ribbons to do so.
I find myself having to switch back to CLASSIC view to use them and then back to RIBBON.
See the 2 images.
CLASSIC.JPG
CLASSIC VIEW
RIBBONS.jpg
RIBBON VIEW
This is my first dynamic block, and I am trying to make a pipe elbow that is selectable for pipe diameter, arc angle of elbow, AND radius of elbow. I got the diameter and the arc angle just fine, but I can't figure out how to do the radius of the elbow. I used a lookup table for the diameter constraints and I used my visibility state for the angle, seeing as I couldn't find a way to accomodate arc angles with a lookup table. What I'm stuck on is the radius bit.
I need to be able to select the radius or the elbow as either 1.5x, 2x, or 2.5x the diameter of the pipe. So for example, if I have a twenty inch pipe diameter, I need to be able to set the centerline radius of the elbow as either 40, 50, or 30 and then have the outside and inside radii fit proportionally. So in the case of a 20 in diameter, I would need one block with one variation that has radii of 30, 40, and 50, another variation with radii 20, 30 and 40, and yet another variation with radii 40, 50, and 60. I could easily make a reverse lookup table to do this for a single size pipe, but in order to do it for each pipe diameter I would need to be able to cross reference the other lookup table to pull the diameter value, and then have the radii respond to that value.
If this is even possible? And if it is not possible, how I could edit the arc angles with a lookup table instead of a visibility state? Because if I could do that I could use my visibility state to do the radii instead. My other options are to create a second and third dynamic block for each variation, or to add each individual radii variation to my lookup table. The latter of which I won't do because that is far too many options for a lookup table that already spans beyond the extents of my monitor. How I could accomplish all three of these tasks with a dynamic block.
Attached is the block as I have built it so far.
Is it possible to select visibilty states of a dynamic block in a drawing, for ex. to count how many of each visiblity are in a drawing?
Ex.:
I have a drawing of a big pile plan with al lot of various piles in there. I made one dynamic block of the pile in which i can select what kind of pile i want to have visible. Now i want to count how many of each pile is in the pile plan.
If all different piles would be different blocks i could easily count with 'Block Reference' in 'Quick Select', but i dont know how to do the same with a dynamic block (which has one block name only) and its different visibilities.
I am working on a few dynamic blocks with ducts.The plan is when you stretch the duct to far it will automatically place a coupling and the next peace of duct.
This wasn’t the problem but if I connect more than 2 ducts it goes extremely slow. (see attached file)
I think that if I am using larger steps between stretching (still testing this theory) it will go faster but this goes against my nature of being possible to exactly decide the length on my one.
Is it possible to link text to each other through visibility states without creating a block within the DB? I have 2 visibility states. Right Section, and Left Section. All notes and text stays the same, geometry is the only thing that mirrors between states.
The hope is that when I update the text on the "Right Section" state, that the same text on the "Left Section" state automatically updates with what I did on the "Right Section".
I solved this by creating multiple blocks within the DB. That works great, however there HAS to be an easier way to do this.
I'm new to dynamic blocks. In my first attempt to create a simple dynamic block with various visibility states in which each would have it's own attribute, the only attribute that works is the attribute in the first visibility state listed. I have read all the postings I could find here in the group on this subject and have made the following changes suggested here to the block:
1. All attributes have distinct tags and prompts. (I even erased all the originial attributes and created new with original tags.)
2. All attributes are locked in position.
3. I REGEN after selecting a different visibility state.
None of these changes has had any effect. Still, then only attribute that opens an attribute edit dialogue box is the "W" attribute in the first visibility state listed.
Sure wish you could manipulate the Column Offset of an Array Action with a Stretch Action.
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS
I have a ventilation attenuator I would like to compile into a dynamic block.
At the moment I have the files in folder (Folder name is length) I wish to create a dynamic block per length.
Is there and easy way to compile this without having to copy and paste from the other files?
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
See the dwg attached.
I'd like to modify a dynamic door block I've created so that I can stretch by door leaf size OR structural opening size, but I'm not sure how to do this.
Incidentally, I think the block has some flaws:
- I think the 'center/flip point' is not exactly in the center!
- The frame size should be 40mm, not 32mm
- The packing zone should be 30mm, not 6.38mm!
Creating a dynamic block that contained more than one visibility parameter. I have tried and it wouldn't let me do more than one. I was thinking of using multiple visibility to work through some text or attribute option all contained in one block instead of having 5 seperate blocks. Wanted to combine all 5 into one, just cannot get the multiple visibility to work.
View 9 Replies View RelatedI have been working with attributes and visibility states for months, i've created a dozen blocks that have worked exactly as designed... Now every block i make with the same method is not working properly
attached is a really simple block. to the left are the 4 individual attributes in the block. on the right is the dynamic block with 4 visibility settings to show 1 attribute, 2 attributes, etc... everything is perfect in the block editor, in model space; vis state 1 shows 3 att's, vis state 2 shows 3 att's, and vis states 3&4 work as designed.
I'm under the gun to create standard blocks to collaborate with 2 other another firms.
I have created a block with 3 different elements (A B C). This 3 elements are totally independents and they can be visible or invisible. Whit only one visibility parameters, there are 7 different visibility states:
xxC, xBx, xBC, Axx, AxC, ABx, ABC
If there are 4 or more elements there are too much possibilities.
I've tried to create 3 visibility parameters, but it's not possible.
¿How can i create independent visibility states for each different object in a block?
Is it possible for a dynamic block to have one attribute which is set to different visibility parameters; eg. i have a block made for a Setting Out Point. I wish to have 4 different locations that the user can place the attribute after insertion of the block ie top, bottom, left, right, of the SOP.
View 2 Replies View RelatedI would like to stretch my extruded shelf using a list of value settings.
I completed the steps in block edit but it will only allow my object to move to my value sets.
In 2D I have no issue.
What am I missing when modifying 3D objects.
See attached blocks.
I foolishly thought i'd sorted making hatch work within a dynamic block that requires user input to set length and width of block...the hatch would fill to the revised size when the user sets the length and width in the properties dialogue...woohoo. Off I go home from work having defeated the nemesis of the day.
Open up my drawing today and can I get the hatch to act as it did yesterday?
I built my block (a simple rectangle all told) added my parameters in block editor. length and width linear actions with 0 grips as I don't want stretching by grips. Added the stretch actions. Tested the block (without hatch)...working. Only then did I hatch, so into block editor and using associative, send to back, normal island detection and selecting the rectangle to hatch. tested block ...working. great. Inserted the block into new drawing...working.
Opened AutoCAD today...Not working...hatch remaining as original size
Tried building new block exactly as I did yesterday...no joy...
On a side note...it works if I leave grips on but only if I use the grips to activate the hatch (it still doesn't work by just typing into properties though) that's not going to cut it as I don't want to be telling everyone to wiggle the grips so to speak.
I cleaned up my block and I am trying to use a field to reference a polyline for it's overall distance. The distance changes with my lookup action. After rotating and going back and forth from "On" - "Off" - "Both Off", then back to "On", the red polyline doesn't stretch back on it's original plane.
View 5 Replies View RelatedI have a rather unusual problem. I'm using AutoCADLT2013. I have a dynamic block, with chained parameters. The block works perfectly, however, I'm expanding the contents, and trying to add more polylines to existing actions.
I have the following Actions showing: Stretch, Lookup, and Visibility. All of these actions are on unchained Parameters. The 2 Actions I'm missing are Arrays, both on chained Parameters with no Grips.
I've used ACTIONBAR on both Parameters (Show, then Hide, then Show again, I don't want to use Reset!), yet the Action Bars still won't show!
I've been messing for nigh on 2 hours and I can't figure it out. To make things worse, I can't use the Parameter Manager, due to it disappearing when in Block Editor.
I really don't want to have to start again, as it was a right pain in the rectum to get to work right.
is there a way to associate a stretch action with the length of an attribute value (i.e. # of characters in the string) or is this something left to vlisp?
View 1 Replies View RelatedI have a block which is a simple rectangle with a height and width attributes that when I edit, change or update the height and width attributes I want the rectangles height and width to change as well.
I know I can go backwards using fields and the attributes would show the stretched length and width but is it possible to go the other way?
I consider following problem: is it possible to create dynamic block with strech action include wipeout object (frames are turned off).
View 9 Replies View RelatedI have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies View RelatedI've got a block with 2 lines of text, the second line being optional. If the second line is omitted, the first line should be moved down, so it's centered.
I can handle the second line being omitted with a visibility parameter. And I can handle the first line being moved down with a move parameter. But how can I link the two?
Ideally, I'd be able to re-use the line 1 attribute and display it in whichever place was correct, but that doesn't seem to be possible.
With Visibility States there appears to be only 4 options:
Hide for current state.Show for current state.Hide for all statesShow for all states.
I need a 5th option... Do not change visibility when this state is set current.
So, in other words, I'd like to turn objects on or off independently from each other... so lets say I have two sets of objects... I want to toggle on only the 3rd item in set A and only the 5th item set B... but each set would function separately from the other set.
I have a dynamic block with visibility states.When I use the method BlockReference.Explode(entities) I get in 'entities' all entities including all those who are part of the visibility states not selected. But I want only the entities in the selected visibility state.What surprises me more, is that entities from other states of visibility, although they were added to the current space, do not appear.
How to retrieve only entities associated with the selected visibility state?Or how can I identify entities that are not part of the state of visibility?
var entities = new DBObjectCollection();selectedBr.UpgradeOpen();selectedBr.Explode(entities);foreach (Entity entity in entities){ currentSpace. AppendEntity(entity); tr.AddNewlyCreatedDBObject(entity, true);}selectedBr.Erase();
I'm trying to create a dynamic block with several different visibility states and for each visibility state I have created an attribute. Each attribute has a different text style because I need the size of the text to change when I change the visibility state. But on the model space I can only see and edit te attribute in one of the visibility states. How to create a block that allows me to see different attributes in different visibility states or that alows me to change the text stryle of the attribute acording to the visibility state?
View 2 Replies View RelatedIn the past I have not managed to get attributes to constantly behave themselves if I applied a visibility state to them. Following posts by steven-g where he has a method to get them working together I thought I would give it another try. His method was used to link the attributes to a further reference attribute to reveal a field but mine is far simpler, just requiring one of two numbers to appear depending on the project state.
I had two attributes which toggled their visibility but only the primary attribute would display UNTIL AFTER I locked and prest the attributes, wherein it all looks to be working as wanted.
So my question is, why does it now work (and will it continue to do so)?
I don't know if I could get away with only one of those actions but since I had something working I didn't want to break it. I will test it once these drawings have cleared my desk.