I am using the volumes dashboard extension in Civil3d 2012. Where the style sheet for displaying the report is stored? I want to modify to be a bit nicer!
View 1 RepliesI am having an issue with my label displaying in my profile after I create my plan and profile sheet set. The PVC, PVI and PVT all show up, but the labels are not displaying. I looked through the layers and they are all thawed.
View 7 Replies View RelatedWe have recently upgrading from 2012 to 2014. Several of our jobs are not reading the surface when we open the drawing. We have to force the sync of the surface and then the grades display.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
I've written some code to import a step file. The html report wants to display!
How do I stop this happening?
'Find the STEP translator Add-In.
Dim oSTEPTranslator AsTranslatorAddIn
Dim ll AsInteger
[Code]....
I am using ACA 2012 and when I insert a view into a sheet, the text and dimensions in the view do not display. I have checked the view and the text and dimensions are on layers that should display in the sheet. The layers are on and thawed in the viewport on the sheet, but do not show up. I have turned on all layers and only the model (building information) shows, no text or dimensions.
View 2 Replies View RelatedI have set up a view with a stair that goes from the first floor to the second floor. The stair has been asigned to the first floor level only. It appears as I want it in the view. However, when I drag the view into my sheet file, the stair disappears and only the path shows, without the individual nosings.
View 1 Replies View RelatedIs there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
How do I delete the AutoCad block symbols that are stored inside my drawing?
Not blocks that have been created that you can see on your drawing it’s the blocks that the point styles use and are stored in the drawing.
I'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
I would ask a question about the Cut and Fill Volumes reports in Civil 3D.
View 3 Replies View RelatedI import a survey data (X,Y,Z) in civil3D and make an horizontal alignment near them. I want reference theses survey points to my new alignment by a .txt report (#pts CH. OS elevation). Is it possible?
View 3 Replies View RelatedSetting up my first press parts list and already I'm regretting it...
How do we report material? Lower case letters spelling ductile iron is not acceptable in this office. How to I edit this to be 'DI' or anything else? I have looked in the press part catalog editor or whatever it's called and did not see a way to add to the list of all lower case materials.
Do I have to rely sole on part description for material in labels? ....and why do they still think that no one needs to use the " symbol with these parts? Freakin crashing all morning tring to get this going...
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies View RelatedI'm missing the tab in my tool space that has the report generator in it. What command brings that tab back?
View 2 Replies View RelatedI would like to re-format the way volume reports are displayed, for example I don't need the cut area or reusable volume columns or I'd like to change the Cu.m. dimensional to something like m3.
View 5 Replies View RelatedIs there a way to included the radial bearings of curves for alignment reports generated for the report manager? I know the curves are tangent because I made them so, but the guy checking my report for errors doesn't know that. I don't know any xml.
View 1 Replies View RelatedCivil 3D 2013.
First prize for me would be to be able to access Parcel boundary vertices via managed dot net.
I could not find the boundary property of the Parcel object.
It looks like developers can access Parcel vertices via COM, in the Loops property of Parcels.
So, it is possible to combine the two to get what I need.
Then I turned to the Report facility. The METESBOUND XSL iterates Parcel segments but provides the distance and bearing instead of the vertices. I was hoping to get to the bottom of the linked code to edit it and produce the vertices output. But - I failed again. Cannot see how the XSL files get to the data needed.
Is there maybe a book or comprehensive reference on the XSL files that provide the reporting function?
how can i create custom report ?
View 7 Replies View Relatedwhy the "cut/fill" numbers are all at zero in my report? All the offsets and the design elevations show just fine....
View 9 Replies View RelatedIs it possible to create a Slope Stake Report for multiple baselines?. When I generate the report, it only creates a report for the first baseline of the corridor. All of my sample lines are in the same section group, so I'm wondering why it would not create all my sampled stations.
View 7 Replies View Relatedhow to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d
View 2 Replies View Relatedhow to get Super Elevation report for superelevation value at every point separated
View 2 Replies View RelatedI am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
Photoshop CS6 incorrectly displays Layer Styles when zoomed out. Different zooms display Layer Styles differently.I've noticed this issue since PS's document display engine was changed along with the addition on enhanced GPU support, but it never really hampered my work, until today.so, notice the lowercase "c" has some odd light colored shapes inside of it. These are there because I've applied a Bevel. Just how it should be be.
-This is 100% zoom:
-Now 50% zoom: (notice the difference)
-Now 25% zoom: (big difference)
I was actually working 25% carefully tweaking my little candy letters to get 'em lookin' all nice and shiny. Got to a happy point but then zoomed in. I was dismayed to see the extra bevel I'd applied look like garbage (refer to 100% zoom pic, above).
this project is huge - 28x36in 300DPI poster. Zooming in and out constantly sucks. I don't use Layer Styles that often but when I do I'd like to know that PS isn't lying to me when I'm zoomed out.
I need to include the data definition for 120 elements . I'll insert it at a word report.
Civil 3D (2013)
When creating a Corridor Section Points Report using the Toolspace>Toolbox>Reports Manager in Civil 3D 2012, the stations get listed but only a few contain point information (see attached).
I am trying to generate stake-out data for a proposed road. I was able to get this report to work successfully in one of the Civil 3D tutorials, so I assume that nothing is wrong with the utility. The problem may be related to my corridor.
I am trying to export an Alignment PI Station Report. I've set all the settings I can find to round coordinates to 4 decimal places, Distance to 2 decimal places, and Direction to the nearest second (DMS). When I execute the PI Station Report, the Distance is 3 decimal places and the Direction is to the nearest 100th of a second. how to get these to the correct decimal place? I managed to change them to the correct decimal place for a Station & Curve Report, but not for the PI Station Report. Also, for the Northing/Easting coordinates, I want to remove the commas (for example, a Northing of 3,058,715.3774' should read 3058715.3774').
View 4 Replies View RelatedI want to generate Civil 3D point of intersection alignment report including following columes.
PI Row station
Delta Angle
PI Includead Angle
Is this possible?
AutoCAD Civil 3D 2012 SP 2
My parcel inverse reports from the Toolbox Report Manager are still coming in with the bearings having decimal seconds to 3 places (N 0-00-00.000 E). I have already changed the variable for angle precision to zero in the "General_Formating_JScript" xsl file but it's still not coming out correctly. Is there any other file that holds an additional angle or bearing precision setting?
View 4 Replies View RelatedI am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.
View 2 Replies View Relatedi am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies View Related