AutoCAD Civil 3D :: How To Import Points From Dwg File
Jun 6, 2012how can i import points from the attached dwg file?
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Import Points From TXT File
Jul 20, 2012AutoCAD Civil 3D 2011 - How do I set it up so that when I import points from a .txt file, point no., elev, and desc are displayed in the drawing next to the point node?
View 5 Replies View RelatedAutoCAD Civil 3D :: Text File In PNEZD Where D Is XYZ - Import Points
Jun 18, 2012I have a text file in PNEZD where D is XYZ. I have a description key for XYZ. I am importing this file into survey. When I import this file the points do not take the style of the description key, they take a default style from somewhere. What trick am I missing so that when I import points into survey they use the description key and therefore have the correct style.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: Import CSV File Points Don't overlay Original Topography
Jan 14, 2013I'm very new to Civil 3D.I've been given original topography in a .dwg file and a .csv file of the same topography after some dirt work.My problem is when I import the .csv file the points don't overlay the original topography.
What I have done is added the .csv points to the original topography .dwg with the "Points From File" option.
AutoCAD Civil 3D :: Import Points With Scale Factor?
Nov 20, 2012To import the point along an alignment into Civil 3D, I need to introduce a scale factor. But by adding the Scale Factor column to the points and modify one of the formats in the Civil 3D to accept the scale factor, change was not affected to the initial state (without adding a column to a scale factor). I got the points, regardless of the scale factor and now, I want to add a scaling factor for the points.
Windows7 64bit
AutoCAD Civil 3D 2012
AutoCAD Civil 3D :: Re-import Points And Line Work
Nov 13, 20121. When I do a re-import of my points my linework appears to double up (linework over linework).
2. In my description keys I use "rr" for rail road and "rrisg" for railroad signal (no * in code), linework comes in for both even though I only have it set up for "rr". I thought without the * in code this would not happen, but still does.
3. Finally, I use the "Survey Point Properties" window to make edits to points. All seems great, but when I got back into my drawing all my work was gone? Do I need to update the database some how with the changes? I was under the assumption that by doing it the way I do the changes are saved to the database. Is it better to do the edit on the Survey Tab by right clicking on the import event and selecting "Edit Points"?
AutoCad :: ASCII File Of Position - Import Points
Dec 5, 2012i received a ascii file of position and elevation points (PNEZD) and do not see any where to import these points into AutoCAD 2011.
I know there exists survey products from autodesk, but still kind of wondering why there is no easy way to import points in the basic CAD program.
How to import a PNEZD file into AutoCAD 2011?
AutoCAD LT :: How To Import Excel File To Create Points
Feb 9, 2012I am looking to import an excel file to creat points within LT 2012. Can this be done?
View 4 Replies View RelatedAutoCAD Civil 3D :: Re-import Event Deletes Control Points From Survey Database
Jan 13, 2012Running C3d 2012 here, but haven't used prior versions. I'm using fieldbooks to import survey data. If there is an error of some kind and I "Re-import event" for the fieldbook, then the occupied points from the field book are deleted out of the survey database and I get the resulting error of "point invalid" during the import. My fix is to go into my control drawing and import the control points from the drawing into the survey database then run the "re-import" again.
View 9 Replies View RelatedAutoCAD Civil 3D :: Insert Points In CSV File (PNEZD)
Sep 20, 2013I have been trying to simply insert points in a .csv file (PNEZD). The foints are taken SPC systems and elevations are in feet. I am using the imperial english template with no conversions. When i import the points from a file the points come in in the correct position but the elevation is in meters insted of feet!
View 5 Replies View RelatedAutoCAD Civil 3D :: Export 7 Million Points To Text File
Jun 21, 2012i need to export 7 million points from a tin surface to text file with only NEZ in comma delimited format for Surfer 9 software. right now i have the civil 3d surface. but the export to csv stock reporting tool sucks. why the hell do you open the file and why leave an empty row between data points? so it's not usable.
also i have 12gb ram at work and it can't export surface points to autocad format ran out of memory. this is with surface display showing points and just the "dot" style so it's autocad points after export. i was originally planning on using "dataextraction" command in autocad to export to csv. worked on a small batch of file. so i think may work for the bigger file. but i would never know because i can't even get the points into autocad.
also yeah i would love to simplify the surface but it's so buggy that you asked it to remove 80% of the points it only remove 100k points at most out of 7 million. so not usable.
last resort is i can program something in vb.net but not much motivation on doing so.
AutoCAD Civil 3D :: Moving Survey Points (nodes) Generated By TXT File
Jul 27, 2012My surveyor gave me a topo survey done in no particular coordinate system. He set up his total station on a PK nail and gave it a coordiante of (5000, 5000, 100). I used this survey to generate a surface.
I also have a site survey of the same site, done in state plane coordinate system. the two surveys have mulitple common points; pk nails, iron pins ect.
What i need to do is move the points for the topo survey over to the survey that is in state plane. A simple move command will not do this.
How do i go about moving these points to thier correct location without having to manually edit the .txt file?
AutoCAD Civil 3D :: Utilize Trimble Ability To Export Points To XML File
Apr 13, 2012I am trying to utilize Trimble's ability to export Points to an XML file. The XML file contains some additional Attribute data. I have created the new Point UDP's and also Created a new Point File Format. Here lies the Problem, when I go to the Insert Tab in the Ribbon and pick import from XML. It gives me no choices to select a Point File Format? It just imports the file with just PNEZD data only, and not my additional Attributes.
View 7 Replies View RelatedAutoCAD Civil 3D :: Surface Points Added From File / Can Change Their Style
Mar 14, 2013I can only change the layer color.
But I can't change the cross simbol, its drwaing scale.
Also cant view the point number,....
Maybe I cant view or set these properties when points were added using "Point Files" option.??
Civil 3D (2013)
AutoCAD Civil 3D :: Export Points To Datacollector And Create Points List
Feb 8, 2013I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
AutoCAD Civil 3D :: Large Surface - Converting Points To Cogo Points
Mar 5, 2013I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
AutoCAD Civil 3D :: Converting Points To COGO Points Naming?
Oct 9, 2012I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies View RelatedAutoCAD Civil 3D :: Designating Points As Control Points
Aug 17, 2012I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedAutoCAD Civil 3D :: Moving Points Out Of All Points Group?
Apr 10, 2013I have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
AutoCAD Civil 3D :: How To Import DGM File
Sep 17, 2012I am trying to import a DGM file into Civil 3D.I do this by adding a DGM file to a surface through prospector>surfaces>surface>definition>dgm files,
however the problem I am having is that it defaults to DEM file types which through research I have found out is our american counterparts version of the DGM.
AutoCAD Civil 3D :: Import RRD File
Dec 21, 2013i would like to know how can I import a *.rrd file into autocad civil 3d 2014....or how can I convert it into a geotiff file.
View 1 Replies View RelatedAutoCAD Civil 3D :: STM File Import
Oct 30, 2013After analyzing a storm system in SSA or Storm Sewers I’m exporting it to a .stm file. When importing to CAD it recognizes the existing pipe network and asks to update it which works but it adds two horizontal purple lines in the profile which are attached to one of the pipes in the profile. If you erase the purple lines it erases the pipe with it.
Things I tried already with no success:
-Erase profile and re-create it
-Erase alignment and re-create it
-Erase all pipes before import (so it would import as new, not update)
-Try LandXML for export/import (this wouldn’t update pipes, it just brought in a whole new network and messed up all the styles/parts)
Here is what it looks like:
AutoCAD Civil 3D :: Unable To Import STM File
Nov 30, 2012I executed Edit in Storm Sewers to work on the Pipe Network in Civil 3D. I made some changes in Storm Sewers, now I want to Import back to Civil 3D.
Nothing is happening in Civil 3D when I try to Import with either of the choices, picking Overwrite or to Create a new pipe network. I am not sure what I am doing wrong.
I have attached the drawing file and the STM file.
AutoCAD Civil 3D :: PNEZD File Import
Apr 20, 2012New to Civil3D 2012.
I have a point file with <null> elevations. Somehow it won't let me import this .txt file (using pnezd comma delimited) into my .dwg. If I have elevations I have no problems. We tried creating a pned (comma delimited) and the <null> having an unused column and it didn't work.
AutoCAD Civil 3D :: Convert / Import VWX File Into DWG
Apr 8, 2010I had someone send me a .vwx file that I need to convert/import into AutoCAD3D 2010. The File/Import menu does not have an option for this type of file. They also sent a .dwg file but I expect I should be able to import the .vwx into any .dwg file.
View 8 Replies View RelatedAutoCAD Civil 3D :: Import / Attach DGN File In DWG?
Apr 16, 2012I tried the dgnattach command, but got an error message that my dgn file could not be opened. how else I can import/attach a dgn file in my dwg?
View 4 Replies View RelatedAutoCAD Civil 3D :: Import ASCII GRID File
May 3, 2012How can i import ASCII GRID file in autocad civil 3d. I use autocad civil 3d 2012.
View 6 Replies View RelatedAutoCAD Civil 3D :: Shape File Import - FDO Provider?
Apr 12, 2013I am attempting to import a shape file in Civil 3D 2014 and get an FDO error (see attached). I have performed this task nearly everyday for an entire year in 2012 with the same file, method, etc. I change my workspace to 'Planning and Analysis", select 'Map Import' and select my shape file...error!
View 4 Replies View RelatedAutoCAD Civil 3D :: Import ASCII File Into Drawing
Nov 4, 2013I'm having problems importing points into Civil 3D 2012.I'm trying to import an ASCII file into the drawing.Files formats are P,N,E,Z,D in ASCII file and the same format is selected when I try importing.
The ASCII file has well over a 1000 points but when I import the points only the first twenty or so points import to the drawing.This seems not to be limited to this drawing.I tried to import points to a different drawing and the same thing happened.
Up to this point I have not had trouble importing points into other various drawings.Is there a button or setting that may have changed that is preventing full importation of the points?
AutoCAD Civil 3D :: CSV File Import Into Drawing - Marker Styles
Apr 7, 2013I import a csv file into my drawing and all the points and figures get drawn correct and on the correct layers.
But I end up getting some extra things also:
1. a little white circle comes in from the marker styles. it comes in on layer V-SURV-NTWK
2. i also get an extra white line that comes in on layer 0.
I have stopped these things from happening now by hitting the light bulb for the "basic" Marker Style and the "basic" Feature Line Styles. But i would really like to know what the Marker Style and Feature Line Styles are and what they are there for.
AutoCAD Civil 3D :: Survey Database Settings Change On Import Of FBK File
Nov 20, 2013Recently we have discovered a problem (bug?) with the survey database. We usually import our field data from our Trimble controllers into the survey database (SDB) through Trimble Link. We have been very careful to get all the survey database settings right, so that the data comes through correctly and have been successful up until the last few weeks. We find this a good workflow, where we are able to make edits to our field data (change target heights etc) easily in the SDB and comparisons with Trimble Business Center and direct output on-screen in the controller confirm that our data is reliable. We often have both GPS (long Network RTK vectors from the nearest network base station) and total station observations in the same file.
The issue is that, as the fbk file is imported, the survey database settings change to reflect the content of the fbk file. The "Atmospheric conditions" and "Curvature and Refraction" settings, which I have purposely left unticked (the controller applies these corrections), become ticked. This throws out our heights, especially on the long GPS lines.
We do have the option for a workaround, which involves going back into the Edit Survey Database Settings after import and updating the data in the sdb, but this is clumsy.
This seems to be similar to the issue that was discussed here. However, we have only just encountered this issue in the past month or two, which coincides with when we rolled out C3D 2012 Service Pack 4 across the office. We are planning on implementing 2014 soon, so I have tried it out on 2014 as well, with the same result.
Is this something that others are dealing with too? Perhaps there's some sneaky setting somewhere that I haven't found which locks down the SDB settings preventing them from being changed on import? Otherwise, I think this is a bug.
I am also bracing myself for some comments regarding the dangers of using GPS in the SDB!
Civil 3D 2012 SP4