AutoCAD Civil 3D :: Getting Random Table Borders
Dec 31, 2013
In the past couple C3D versions, I've had these random borders show up in my simple tables. I have a table for my legend and another one I use for a list of references. I use no borders for these tables but sometimes when I edit a cell somewhere in the table, the random border will appear. I remove it and then sometimes it reappears again later. It's usually the top line of the second row, second column only but occasionally it will be when I add a row into an existing table.
View 2 Replies
ADVERTISEMENT
Jul 12, 2011
I have a little issue I’ve never encountered regarding the border color not retained by the cells. I’ve created a table style to use throughout our drawing set. I have merged cells for the table title, as well as section titles in the table. I have set colors associated to the borders. All is fine, until I click in any cell to make a change, then all the merged cells lose some or all colors associated to the table (see below). I’ve even tried locking the format, but it still happens.
Legend.jpg
View 3 Replies
View Related
Jul 7, 2011
In ACA2008, can the display of each of the four edges of a cell in a table be controlled individually? I want left and right edges of cells to display, and top and bottom edges to not display. In the Cell Border Properties dialog box, I can set the Lineweight, Linetype, and Color of each edge, but I don't see how to set the visibility of each edge.
View 4 Replies
View Related
May 18, 2012
I am using a link to an .xls worksheet to populate a General Table in my .idw (Inventor 2012). See attached. The blank space underneath the first lines of information will always be blank, no matter how many rows we get. Is there a way to have the drawing hide the blank/empty cells, make the borders invisible, etc?
I have tried using the Insert Object for an Excel file instead of using the Table feature, but it does not appear to be an updatable link. As in, if I change data in my .xls file, it won't update the inserted object to the same info.
View 3 Replies
View Related
Aug 4, 2004
I'm VERY new with photoshop and I was just wondering (since I'm designing my own website) how to go about creating a section on my page that will have visible borders with rounded corners? Basically just a big square with rounded corners that will have text in it. I don't know if I try and create the borders in Dreamweaver and then use photoshop drawings of the rounded corners or what? Or do I create the whole image in Photoshop?
View 2 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Jan 14, 2013
I have one surface (surveyed pts) that I would like to paste onto another larger surface (say a LIDAR or GIS base). The extents of the small surface are entirely within the extents of the larger surface. The small surface does, however, have some interior areas without any data ('holes' if you will). In these areas, I want the paste operation to result in just the original base surface... but the paste operation assumes I want the new composite surface to also have a hole...
Screen shot illustrating attached with example surfaces. Is there a way to paste only the surface and not the holes?
View 5 Replies
View Related
Jun 11, 2013
As I was creating a surface consisted of contour lines, suddenly some bunch of random points in the surface were also created. I want my surface to be solely generated by contour lines only. So...
I know I can get rid of those points by deleting them through edit but I want to get rid of them all at once. How can I do that? Or... Is there even a way to do that?
View 5 Replies
View Related
Feb 19, 2013
My C3D 2013 just started doing this last week... I first noticed that it would zoom to extents when I operated the center mouse button for panning. It was random, about 1 out of every 15 to 20 pans using the center button.
But then I noticed that it's not just the panning. It will randomly zoom to extents when I type in a command. Earlier today, it did it when I did a REGEN, then again when I did a MAPWSPACE.
The other notable thing is that there is no "zoom" command anywhere in the command history when this occurs.
Besides changing the mice, I also tried rebooting and running a repair on C3D. I have Win7-64.
The problem seems to coincide with when I started using Autodesk 360. Not saying it's related, but it's fishy.
View 5 Replies
View Related
Mar 28, 2013
After I close C3D 2012 I get this button,
Why? It doesn't seem to be affecting anything, but it's annoying.
Any way I can get rid of it?
View 9 Replies
View Related
Jan 20, 2012
How i can take off or remove the message "finding exterior borders". This appear in the left bottom corner of Civil 3D.....it makes that my computer is very slow...
View 1 Replies
View Related
Jan 21, 2013
Civil 3D 2013, SP1, Windows 7, 64-bit -
I've got a user who imports points into the survey database and RANDOMLY the points will be shifted on average 27 feet in the northing and 4 feet in the easting. She notices this because she'll check a point and see tht the northing and easting varies from the grid northing and easting (I've attached an image to view) She will then discard the drawing and begin a new one only to import the data and now it imports correctly. The behavior is completely random and it's happening on multiple projects.
All the projects begin with the same template. All the settings (drawing settings and survey settings) have been set to US Survey Foot. It's weird because once the issue is noticed it can be fixed by simply beginning another drawing and re-importing the data, but it has happened on projects where she's already got pre-existing data.
View 9 Replies
View Related
Nov 9, 2011
I'm having a frequent but random problem with Multileaders where the landing distance will change on its own from its initial standard 1/8 inch to some relatively large negative distance which also causes the landing to disappear altogether. If I use the move trick for resetting all elevations to zero (Move 0,0,10e99 then 0,0,10e-99) the landing will reappear connecting the landing grip at the strange negative offset.
The problem seems only to happen when the leader is connected to the bottom right of the note.
When I remove the leader and add a new leader it appears correct but as soon as I save the drawing the affected Multileaders will again present this problem.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 9 Replies
View Related
Oct 2, 2013
We have drawing "A" that contains a surface (call the surface "SurfaceA").
We have another drawing "B", that contains an alignment and a reference to"SurfaceA"
The user created EG profiles in drawing "B", and has been working on this drawing periodically.
Today all of a sudden when he opens Drawing "B", the EG profiles are missing. When you look at "SurfaceA" in Drawing "B", there is no data. We synced, we made sure of the association of the drawings to the projects, etc. etc.
I verified the data shortcuts are OK, and verified that both drawings are in good shape (via Recover and Audit)
But wait.....here is the crazy part. If you shut down Drawing "B" and open it say a dozen times, once or twice in that stretch, "surfaceA" shows up and the EG profiles will appear OK too. It's feels very random.....
View 4 Replies
View Related
Mar 17, 2009
I have a few questions regarding spread/street capacity:
When calculating the spread at the catch basin locations, how does it determine the curb height?? Does it always assume 6"?? what if it is a roll curb??? is it olnly determined by the "throat height" of the inlet?? How can I calculate my spread on random spots throughout the street??
View 5 Replies
View Related
Jan 9, 2012
I have a drawing the loads slowly and makes Civil3d become non responsive for i while.
It seems to stop with "finding interior borders" as the action in the lower left corner it has some datashortcuts and xrefs on to a network drive.
How to find what is the causing the slow down?
I will start by removing all the xrefs and datashortcuts and see if it works?
I think I have read about slow load times with network drives recently but can not find the post again.
View 3 Replies
View Related
Oct 15, 2013
Is there a way to create a point group of random points within a drawing and adjust the elevations for the points within that group? Some of the points in the group may have been manually created and some may have been imported by way of "Import Events"..
View 3 Replies
View Related
Jun 15, 2012
I'm uploading the .dwg and .txt files. I'm trying to get volume calcs cut and fill between two surfaces and when I compare the data between AGTEK's Highway 3D there is different results. I looked into it to find these random line appearing in Autocad making what seems to be the problem. Where are these coming from and how do I fix? Also, if you could anwser how can I insert a sectional following the 12'-23' offsets and dropping 1.16' down and adding it to my design surface. I want to make a big box there added to design surface.
View 1 Replies
View Related
Nov 5, 2012
Creating a CTB file to mimic a Microstation pen table? I have a client supplied *.tbl (an intergraph pen table file I believe) and how to generate a CTB that will behave similarly (ie. plot nearly the same)..
I can open the *.tbl file in a text editor and it just looks like a bunch of "if, then" statements related to line weights and pattern files....
I have already created a template with the same layers/levels, colors, linewights, etc... (and can convert everything to dgns), but now I need to figure out how to get similar plotted results from both sets of drawings (the dwg and the dgn..)
View 2 Replies
View Related
Apr 19, 2012
I am using C3D 2012 and i know how to create a table showing volumes for different elevation ranges with different colours, but how to show the total cut or fill for the volume surface in the same table so that you dont have to manually add up all of the cuts or fills? or have to display only two ranges?
View 1 Replies
View Related
Jun 3, 2013
I am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
View 2 Replies
View Related
May 21, 2012
Is it bad to make a structure table from a DS? I find I get missing data when I do.
View 2 Replies
View Related
Jul 9, 2012
I had a table in a drawing on layer "Text" and I changed the layer of the table to "Text - Frozen" Then I decided I wanted the table back on layer "Text" and something strange happened. The text in the table appears to be on the layer "Text" but the lines which make up the table are still on layer "Text - Frozen". So when I freeze "Text - Frozen" I get only the content of the table with no lines. When I select the table, it is indicated that it is on layer "Text".
View 1 Replies
View Related
Oct 30, 2013
I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies
View Related
Aug 23, 2013
We use tags on lines labeled L1, L2 etc... for roads and pipelines (for legal/right of way purposes). We may have multiple lines to describe (differernt section/land owner) and need to start back at L1.
Is there a way to automatically start back at L1 rather than it starting at a higher number and having to reset the number one at a time? Get's quite tedious when you have multiple lines needing number with say lay 20-30 segments.
View 6 Replies
View Related
Nov 13, 2013
Where should i insert my point tables? In the model or the paper space?
in the paper space it seems that i cannot control the insertion scale?? i set specific letter height that works fine at the model but in paper every time i create a table I see different size depending on the zoom I have.
View 1 Replies
View Related
Oct 11, 2010
I want to be able to make a alignment table with northing and easting coordinates for the following:
bop
pi's
eop
Is this possible? The closest I get is to make a curve table with the pi coordinates and no bop or eop coord'.
Civil 3D 2014
Win 7
View 1 Replies
View Related
Jul 8, 2013
I've got a bunch of tags with a dedicated "tag mode" style, and if I select them individually I can add them to a table, no problem. However, if I try to do a mass selection of a swath of labeled lines or arcs i get the option to convert all non-tag labels to tag lables (I don't want that) OR don't add those labels not in tag mode (presumably keepin those that are). The problem I have is if I select the latter it deselcts everything. Am I missing something or does this not function as it implies (or at least how I wish it would)?
(running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies
View Related
Dec 16, 2010
Is there a way to show the MES Top Elevation as blank or a dash? It would be great if I could make an expression but without the use of text strings in the expression editor, I don't know how to accomplish this without using wipe out boxes over the elevations.
View 2 Replies
View Related
May 22, 2006
I have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies
View Related
