AutoCAD Civil 3D :: Created Samplelines And Sampled Surfaces But Sections Count Is 0
Oct 25, 2012
for each sample line it samples 6 surfaces. but i can't get the sampled surface object from the sampleline.
maybe need to commit something before running that code? like i think if i let the program finish just do the samplelines and add surface in. and then go in again it will show the section objects can be counted. bug in the com objects by autodesk? so many bugs all over the plac.
'create sample line Dim oSampleline As AeccSampleLine = oSampleLineGroup.SampleLines.AddByStation(oPoint.Name, dStation, txtLeft.Text, txtRight.Text) oSampleLineGroup.SampledSurfaces.AddAllSurfaces(oAeccDb.SectionStyles.Item(0))
For i As Integer = 0 To oSampleLineGroup.SampledSurfaces.Count - 1
[Code] ......
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 2 Replies
ADVERTISEMENT
Oct 10, 2012
I sampled my sections at 25 feet intervals, created my section view group and them plotted my cross section sheets. All look fine.My problem is that I need to include Station 21+17.40 and some other similar stations (in-between the 25 feet intervals) into my cross section sheets without deleting the existing Sample Line Group and Section View Group. Is there a way I can sample my desired additional sections and add them to the existing Sample Line Group and Section View Group and re-plotted my cross sections?
View 1 Replies
View Related
Jun 28, 2012
I want to extract sampled sections to a text file like "Station,Offset,Elevation" by C#.net.Something like tplate output in land companion, which functions should I have access to do above?
View 5 Replies
View Related
Nov 25, 2013
I have multiple surfaces representing topsoil, clay and types of bedrock, and an alignment set with sample lines and sections set. Trying to use the Compute Materials using material lists and the corresponding shape style to hatch between each surface something is going wrong. With all the display settings (Plan,Section,Profile,etc) set to by layer and on a created layer(not on 0). The shape area fill is set to solid. It will not display the hatch.
View 3 Replies
View Related
Oct 13, 2013
I am trying to create a surface using the grading tool. I have a known top and a designed floor. I extended the floor surface out to meet the top breakline. I then use the grading tool to run a 3:1 down to the pond floor so I know where the true breakline is, but there is almost always a gap or two in my surface. It is usually less than a foot, but it has made my OCD kick in and I am going crazy trying to figure it out. I've traced of the breaklines, and the contours and added them to the surface to try and fix it, but that doesn't seem to work.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 8 Replies
View Related
Jun 14, 2012
I have created several different corridors (with different assemblies in them), but when I to to view sections the same assembly keeps showing up. How do the sections get updated with the new assemblies?
View 4 Replies
View Related
May 7, 2012
Is there a way Inventor can list/count the number of surfaces within the model?
View 1 Replies
View Related
Sep 13, 2013
It is 27 miles of waterline broken into 3 mile segments.The problem is with the profiles that have been cut. The existing ground surface has been sampled along the alignment and multiple profile view made from that alignment. When the alignment changes, the only way that the surface seems to update is to run the "profiles; create profiles from surface command again" at which point it adds a new profile into the profile views reflecting the current surface over the alignment, then the "old" profile must be deleted from the profile views. Everything is set to dynamic, yet certainly is not being very dynamic.
View 4 Replies
View Related
Aug 20, 2007
I came across a tip/trick on how to count/label parking spaces using dimensions, I think, awhile back. Now that I need to do that for a parking lot design, I can't find it.
View 9 Replies
View Related
Apr 16, 2012
I am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
View 2 Replies
View Related
Sep 6, 2012
i'm jumping into 3d late in life...playing with volumes. i've created surfaces from aerial surveys and have saved the surfaces as separate files. i would now like to run volumes of the two as they represent the same quarry site from different years. it appears (?) i need to have both surfaces listed in prospector to run volumes. each separate file has its own surface listed. question...how do i get (import?) the second surface drawing into one of the files so i have both listed and can run volumes? i see where i can create a surface from importing a .tin file...but i don't see how to export the surface as a .tin file.
View 4 Replies
View Related
Feb 5, 2013
I am having a problem with my data shortcuts for my surfaces not updating. I have 2 surfaces (one ex and one prop) both are on auto-rebuild. Both of them are in separate files and data short cutted into my profiles files (I have one for water, one sewer and a third for storm drains). Any time I make a change whether I add or subtract data the file the data does not update in the profiles. As a work around I have been creating a new data short cut and adding it to my profiles files. What am I doing wrong that would make them not update?
View 9 Replies
View Related
Nov 2, 2013
When you paste a surface into another how does it connect the surfaces? Does it create a vertical wall where at the edge of the paste surface? Can you tell it to grade a certain slope to the surface you are pasting into?
View 1 Replies
View Related
Jun 14, 2013
I'm trying to create a surface under my 'existing ground' surface. There is shallow rock where one of our projects is located and using geotechnical data I want to create a 'rock surface' at the known rock elevations. I just want this surface for visual reasons and do not want it to interact with the existing ground or pipe network.
I have 4 places along the roadway where I know the rock elevations. I created new points around each known point with the same elevation so there would be more than just four points on the surface and so I could make it the width of the road allowance. But when I look back to my profile of the road, it shows the existing profile drop to the rock surface at each place that I created points for the rock elevation. Not sure how to make it so the existing ground surface doesn't pick up the new points I added for the rock elevations.
View 6 Replies
View Related
Oct 9, 2012
We will be doing some grading in a park with trees. Probably maximum depth or fill of 12 inches. The question has come up to be able to show cut and fill quantities as a visual shade of colors. I have a way to display cut and fill ticks and it will give me the value, but that's not what they want. I change the cut ticks to red and the fill ticks to green. What is the best way to represent this like when you turn on slope percentages and assign different colors. but I want like 0-2" fill to be red, 2" - 4" to be green, etc.
View 4 Replies
View Related
Nov 6, 2012
Im working in Civil 09. I need to adjust the surface I created in order for the contours to be correct. Right now I'm interpolating point elevations to adjust the contours. I find myself adding lines and adding and deleting points. It's tedious. I tried changing the grid spacing to smaller one. It didn't seem to work.
View 9 Replies
View Related
Nov 6, 2013
I want to ask, Can I get CV Coordinates for Nurbs Surfaces ? How can I get ?
View 1 Replies
View Related
May 16, 2012
How do I create sections that show multiple surfaces?
All surfaces are existing, none are design. (existing ground, grubbed surface, bedrock surface)
How I miss LDD.
View 2 Replies
View Related
Feb 26, 2013
I have an alignement to which I have applied superelevation.
The superevation has been applied and the alignment has been annotation and it shows the change from camber to superelevation on the curves.
However when I create a surface of my corridor it does not show the superelevation, the surface is showing a cambered alignment throughout.
I have created a new alignment, a new corridor and surface and still the same.
View 3 Replies
View Related
Jan 14, 2011
I have recently upgraded to Civil 3D 2011 when we started receiving LiDAR data. I have been playing around with the data a bit and have a few questions on how the data is dealt with. It appears that when a point cloud is added to a surface, it is using the point cloud display somehow to generate the TIN. I believe that the point cloud display is showing a percentage of points based on the maximum number of 1.5 million points. On these particular datasets (citywide LiDAR coverage, about 2,600' x 2,600' panels), we may have 4-7 million points in each LAS file. Is Civil 3D ignoring all points beyond 1.5 million in surface building operations? Also, when adjusting the slider, is there any way to know which points will be displayed...or maybe the points are reduced randomly??
View 9 Replies
View Related
May 30, 2012
I have an existing topo surface created as well as grading for a proposed elevated pad of earth done in civil 3d 2013. I simply want to calculate the cut and fill quantities. I created the grading with automatic surface creation checked on. When I use volume tools to see what the quantities are, it says 0.0 for both cut and fill.
I created another surface (TIN) and pasted the existing topo surface and the proposed grading surface into it and I couldn't get any quantities.
I created another surface (TIN volume) and set the base surface as the existing surface and the comparison surface as the surface created from the grading but again could get no quantities.
View 1 Replies
View Related
Mar 3, 2013
I created a grading and a surface for a pond that is abotu 30' away from a roaway that has a seperate surface. What would be the best way to connect the two surfaces? I need a uniform slope from the edge of pavement to the top of berm of the pond.
View 9 Replies
View Related
Mar 19, 2013
I have an oddly shapped "cut" area with various elevations that I want to create as a surface so that I can compare the volume with existing survey data. I've been able to get the basic "cut" template in 2 seperate surfaces, but now I want to combine them into 1 surface. When I paste one surface into another, the surfaces go haywire. I have attached a plan and cross section view of what the 2 surfaces (cuts) look like in relation to each other. how I could combine them into one surface and "trim" off the inside grading that overlaps..?
View 4 Replies
View Related
Oct 5, 2010
I have a set of sheets that have an surface (contours) on them.
When I plot them individually the surface plots fine. When I publish them using the same page setup, the surface will not plot. The contour labels do plot, just not the actual surface contours.
The surface is data shortcuted from another file.
View 2 Replies
View Related
Oct 17, 2012
I've changed my workflow slightly and have created 4 junctions via the wizard but kept them all in the same Corridor (previously I kept each one in its own corridor).
I now need to create the formation surfaces for the corridor (in the way I always have done it) but only one of the junctions has a surface. I then added a show boundary and the "missing" surfaces appeared but with many connecting triangles and superfluous triangles in the curved areas.
How to get a nicely shrink wrapped surface or is it a matter of brute force removal of triangles etc?
View 2 Replies
View Related
Jul 8, 2013
I have created several pond embankments using the grading tools and have created surfaces using the grading groups. The problem I am having is when I turn on the triangles for one surface, I get the triangles for all the embankments and EG. The software keeps adding to the EG and doesn't cut out each embankment. I know I'm missing a step but I'm unable to find it.
View 7 Replies
View Related
Sep 18, 2012
I am looking for a better way to get my 3D Faces from a surface into a DXF. Note: I need to have 3D Faces in a DXF as it is the only way my data collector will accept them. My current process is 1)export surface to a XML 2) open new drawing and import XML 3)make the surface style only display triangles 4)extract triangles from surface 5)change my surface style to no display 6)save drawing as a DXF. I don't like to extract the triangles from the original drawing because I am often making adjustments to the surface and then the old extracted triangles and still hanging around in the drawing. I don't want that. Looking to see if it would be possible to record a macro(or some other automated procedure) that would allow me to extract triangles as save them in a new DXF from a selected surface all in one step.
Civil 3D 2014
i7-3930K Overclocked
32 GB Ram
Windows 7 Professional
View 7 Replies
View Related
Mar 7, 2013
I've created a T intersection and have created the surface for the T corridor and the entering side road. The surfaces appear correct. When I create a surface for the main road, which has been split into two regions, the surface goes thru the T corridor. How do I create a surface that simply goes up to the T intersection and picks up again after the T intersection?
View 5 Replies
View Related
Oct 23, 2013
Until now I have used Civil 3D for small projects. Now I'm starting a large project, 30 parcels, 5 roads in rough terrain.
Earlier I got some problems with some surfaces of the new construction that unwanted connected together. This time I want to get control of all small new "constructions" (parcels and roads) and connect them to the surface. I realize the original surface will be covered 100% of new terrain. How will I be able to connect all the surfaces together so that I can eventually create a single surface with all the new designs? (and run the waterdrop :-)
How to build all surfaces into the system?
View 5 Replies
View Related
Oct 26, 2012
I need to export a DTM for use in another package which I previously did by Extracting the Triangles, Selecting the 3D faces & Wblocking to DXF for import to the other package.
The developers of the other package have introduced an XML import which I have been trying out but when the surface is imported into the other package via XML most (but not all) of the triangles honour the original 3D faces.
The question is therefore: Does the XML output contain sufficient information to allow the other package to "join the dots" in the correct way so as to mirror the original 3D faces and thus create an exact copy of the DTM??
IDSP Premium 2014 (mainly Civil 3D 2014)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 3 Replies
View Related
Aug 7, 2013
How practical is it to create and manage surfaces across multiple DWG files? One of the reasons I'm asking is some of our users are insisting their work can only done in a single file, resulting in massive DWG files and naturally, Civil3D slows to a crawl. I'll admit I'm not a full time Civil3D user or specialist - thats not my job. I'm reasonably certain it can be done from the most basic of research (which apparently nobody else wants to do...), but am Uncertain what the potential pitfalls are.
They complain of slowness and are requesting better computers from IT (I've talked them down to more RAM). I'm trying to forestall a potentially nasty political situation spiraling out of control: they get better computers, others will want them as well and either get them only because of connections, or won't get them and are resentful for the perceived lack of importance. We don't need people doing 2D schematic drawings on gaming rigs.
View 9 Replies
View Related
