I came across a tip/trick on how to count/label parking spaces using dimensions, I think, awhile back. Now that I need to do that for a parking lot design, I can't find it.
View 9 RepliesAdding parking bays to a a road corridor.? in the image attched, there is a "return" that i have circled. I can get most of the bay to model, but cannot figure out how thto do this return. pardon my being vague with the verbal info, i will let the picture do that talking and fill in any additional info as needed.
View 7 Replies View RelatedThe label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
In previous releases, I was able to put spaces in the text of my ID, in the description field, etc. and I can't in 2014. What is the reasoning behind this change?
View 1 Replies View Relatedfor each sample line it samples 6 surfaces. but i can't get the sampled surface object from the sampleline.
maybe need to commit something before running that code? like i think if i let the program finish just do the samplelines and add surface in. and then go in again it will show the section objects can be counted. bug in the com objects by autodesk? so many bugs all over the plac.
'create sample line Dim oSampleline As AeccSampleLine = oSampleLineGroup.SampleLines.AddByStation(oPoint.Name, dStation, txtLeft.Text, txtRight.Text) oSampleLineGroup.SampledSurfaces.AddAllSurfaces(oAeccDb.SectionStyles.Item(0))
For i As Integer = 0 To oSampleLineGroup.SampledSurfaces.Count - 1
[Code] ......
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View RelatedI have successfully created accessible parking dynamic blocks. They work fine for new parking because they are set to always be a certain width. 5'-0" or 8'-0" for an access aisle, etc. What i would like to figure out is how to create an existing access aisle that can be stretched horizontally & vertically.
The problem is that when the striping is at an angle as is the case with the access aisle how do i go about doing this? Could i put some sort of geometric constraint to be able to stretch it horizontally & vertically & keep the striping at a given angle. Also the striping may need to array as it is stretched.
Well, I bit the bullet, and I'm slowly learning the tricks of Video Studio. Here's my question... is there anyway I can "park" footage on the lower video tracks without them showing up in my preview video? In other words, I typically place clips on lower timeline tracks and eventually insert them into the final video after tweaking the main video track. When "other" clips are parked at the lower tacks, they appear in the preview footage, which I do not want to see.... yet.
View 3 Replies View Relatedwhy my parking line don't show in the rendered site plan?
View 3 Replies View RelatedI'm using the floor to build the parking ramp. The ramp slopes down from west to east. I used the slope arrow to achieve it.
But I just found out today that that parking ramp also slopes down from north to south at the same time because of the sloped site.
So, how can do a 2 way slope at the same time? I tried to add the 2nd sloped arrow but that option is greyed out.
I have C3D 2012. I want to label a part of an arc. The arc has 3 lines that intersect it. I want to label the overall arc and the pieces of the arc. The overall arc is not a problem. How can I label the parts of the arc without breaking it up?
View 5 Replies View RelatedI keep getting the words "Label Text" being placed at 0,0 every time I insert a profile view into my drawing. Is there a simple way to change something in the settings to either not display this at all or sontrol how/where it is displayed? It is annoying when you do a zoom extents being you now get 2 small dots on screen, 1 being the actualy drawing at the correct utm cooridnates and the other being this piece of text down at 0,0.
View 9 Replies View RelatedI have applied a client's style to the alignment to show PI's. In this case we have 2 alignments close to each other (NB & SB of road). PI's close to each other will then overlap. What I would like to do is apply a style that will have the line and text go exactly in the opposite direction. I am trying to avoid dragging the text as that seems to bring up several more issues. I am looking for whatwhere to change within the style editor to make this happen.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
I need to add a ONE label to an alignment. I would like to do it via Vlisp or C#.
View 4 Replies View RelatedNeed writing an expressions in a label style. I have part of it working, it is {Rim to Sump Height}-6 now I would like it to put 0 if it is 0 or less but I don't know how to do it. It works great on positive number but I want it to put 0 if it is a negative number.
View 8 Replies View RelatedIs there a way to label the low point of a profile or alignment that doesn't have any vertical curves? We have an existing alignment and profile which is relatively flat, and we'd like to establish and label the low points for drainage improvements.
View 9 Replies View Relatedhow I can create a sort of grill openings in the ceiling of an underground parking level? There are no ducts connected to it, it's just an opening between the underground level and the ground level, like a courtyard, for example?
View 1 Replies View Relatedhow I can get an azimuth label on my line?
View 5 Replies View RelatedAny way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
we are in a situation where we want a dynamic wall label. how can i make that happen if technically the top of wall and bottom of wall are at two different x and y points. ideally i would like have one label and list it this way by referencing surface elevations:
RETAINING WALL
TOW=XXXX.XX
BOW=XXXX.XX
N=NORTHING
E=EASTING
How to set a value and label the “degree of curvature” for the horizontal alignment (HA)?
As the radius of the circular alignment (R) is calculated from the “degree of curvature” (attached) then I couldn’t figure out how to select a particular value for the “degree of curvature” (R=1718.8/Da) and then to label the horizontal alignment with it.
How to label all the contour at one go.
View 2 Replies View RelatedI need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
View 6 Replies View RelatedI am specifically working with the Section Major Offset lable. The City of Dallas wants the lable to call out the Offset distance and direction over the elevation (example "30.0' LT."). Since zero has not offset direction the label reads "0.0' T." at the center point. Is there a way to include an if/then statement in the label style to remove the hard coded text?
View 8 Replies View RelatedI have a problem with some station labels I have, when I open the drawing(s) the labels display ??? instead of the station. After I manually sync the alignment in prospector, the drawing switches to the model tab with the ? now showing correctly.
View 2 Replies View RelatedWe have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?
View 3 Replies View RelatedIs there a way to remove the background mask from one label that has a style that calls for a mask? The way I've handled it was to create a Child of that style that has no mask.
View 6 Replies View RelatedIs there anyway of getting assigned Pay Items int a label style? I tried adding a text component but there is never an option for payitems.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS