I am getting the following error when trying to validate my part.
ERROR: Sample Expanded Table Row not fully expanded (calc error)
My part works fine as far as I can tell. when I change dimintions it changes to what it is supposed to. I don't know where to start to isolate what is causing this error.
I am working on the part builder tutorials for AutoCAD Civil 3D 2014. Every time I click "Save Part Family", I get the error message "Error Saving XML File".
View 4 Replies View RelatedJust a question about pressure pipe networks in 2013. Is there concrete pressure pipes in the part family, including concrete bends?
View 2 Replies View RelatedI am trying to make parts in part builder but when I try saving I get the error message "error saving XML file". I tried changing the setting on the files for saving but that doesn't seem to work.
View 5 Replies View RelatedI'm trying to do a save as of a previously created and validated part. When I create a new chapter and try to save the part in the new chapter, I get an error message saying "ERROR SAVING COLE FILE". What is a COLE file and why am I getting this error? Could there be a problem because the original part was created in 2013, and now I'm working in 2014?
We recently changed the location of our CAD Standards (such as Pipe Network Catalog). Can I simply copy the Pipe Network Catalog and paste it to the new location and have everything work the same or do I have to do something special?
I am using inventor 2010 sp1. I have a content center part that I want to replace the family template. I am having problems doing so on random components. Sometimes it lets me and sometimes not. I cannot pinpoint any differences or irregularities between the different library parts.
I am recieving the message indicating..."Import Part Invalid"
Here is my process
Open from content center and save to another folder with or without the same name.
Open Content Editor
right click and replace family template
Recieve this message. "Import Part Invalid"
Note that i made no changes to the file.
I have created a new colum in family table editor for a custom part in content center. After that i created an assembly using the same custom part from contentr center. Then i prepared the drawing for that i mean *.idw. In the drawing file i have to attach a part list. and i need to add the the new colum generated in family table to part list.Do we have any option available to add the specified column in part list ?
Inventor Professional Suite 2010
Windows 7
I've got an error everytime I try to replace a Family template in my Content Center (I work with Inventor 2011).
I try with a simple part. Here's the steps:
1- Create a simple part (cube with Width, Height and Depth parameters)
2- Create an iPart with 12 members
3- Publish the part in the Content Center
4- Modify the part (add a column in table)
5- Save
6- Open Content Center Editor and click on Replace Family Template
Got the error: "Import Part is Invalid".
I tried "Save As" instead of "Save" and got the same result.
I have a rquirement to valdiate my dwg file with ObjectARX dll (accoreconsole dll) . I want to now if a font is not availble log the error.
I used
private static void FontValidator(Database db, Transaction tr)
{
TextStyleTable styleTable = tr.GetObject(db.TextStyleTableId, OpenMode.ForRead) as TextStyleTable;
foreach (var item in styleTable)
{
TextStyleTableRecord styleRecord = item.GetObject(OpenMode.ForRead) as TextStyleTableRecord;
[code]....
to go all StyleTableRecord but was not succesful to find my used font just there was 4 records..Am I doing the iteration in the right way ? How can I iteraret whole TextStyleTableRecord in the DWG file?
I'm having a issue with selecting a certain color and assigning it to a part in my nested family. The problem is that when I load it into the project its grayed out.. Is there something I'm forgetting to do, or could the program possibly have a bug? Revit 2012
View 1 Replies View RelatedI'm trying to create a new family - a window with sill and lintel. In the attached file, I'm fine until I add the reference planes to create the fixed window frame. Prior to that point, all geometry perofrm as intended when I change the width or height of the window. Once the frame reference planes are added, the height change draws an error message. I've tried individually eliminating the possible causes with no success. What I'm doing incorrectly and specifically the steps necessary to fix it?
View 5 Replies View RelatedI have placed showers within various apartments. These apartments are groups. I have made a change to the family, (realigned a reference plane to be equal between two points). Now I reload the family into the project and no matter what I try, I cannot load it into the project without getting the ungroup error.
Prior to the warning, it states i need to delete a number of dimension references. Which I allow, then the group error appears telling me I still have constraint problems.
I thought it would be fine to dimension to families in groups, but it appears their is the potential for problems.
I need to validate CS6 on a new computer. I've put in the serial number but says it is valid but a qualifying product could not be found on this computer though I selected CS6 extended. Not quiet sure what to do.
View 2 Replies View RelatedI tried to add a part size in part builder but the dwg wouldn't save or update. It was write protected or something. How can I get around this?
View 4 Replies View RelatedHave been trying to email photos from photoshop elements 9.The program keeps asking me to enter a validation code.
Bought this H.P. laptop 1 yr. ago with Photoshop Elements 9 installed but have never been able to email from Photoshop Elements,the program keeps asking me for a validation code.
Drag & Drop with validation.What I need to do and would like to learn is:I have 4 buttons that I can drag and a box that I drag the right choice. If the option is correct stays, it is if it was incorrect is returned to its place of origin.
View 7 Replies View RelatedI'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
When trying to shell a part i get the error: the attempted shell operation was unable to solve for a vertex....etc. i have attached the problem part file, of which the drawing is a fairly complicated frame (a chassis concept for a 3 wheeled race car i am designing)
How the part was made:It was created in an assembly using the frame generator tool and then converted to part file using the shrinkwrap feature. When using the shrinkwrap command, i selected: single solid body merging out seams between planar faces, All hole patching, break link, and remove all internal voids. and then when trying to shell i get the error message when selecting a wall thickness of 2mm.
i cant understand why the shell feature does not work as i have successfully shelled a very similar part file (with only slight differences in geometry from the file attached in the same way as what i am trying to do with this part). i can provide this part file upon request or the assembly file from which either was created. i need to shell the component in this way so that i can run accurate FEA (stress analysis) for crash simulations on it
I am using inventor 2013 (64bit OS)
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
I am trying to use Create Simplified part and during the creation process..I downloaded a model of a FD breaker off the Eaton Website in .stp format. I am simply trying to get a .ipt file of the model for my layout model.So the steps I did:
1- Open .stp file
2- Save .stp file as an .iam inventor file (ignore the prompt box "this is not a part file", that is from my logic rule for a part file)
3- once saved in inventor format, I click the simplify tab, select create simplified part, select a name and directory and press save
4- the .iam saves into a single part, BUT it is saved as sean.ipt, not the part number I assigned earlier and it is saved to the directory C:Users, not the directory I assigned in the dialogue box earlier.
Why does it do this every time I "dummy" down an assembly to a single .ipt file?
The goal of this project is to take a base part file, save new copies as needed, then modify the copies. They're rings for storage tanks that share the same tank diameter but differ in height and thickness. I have a SaveAsCopy rule in my template ring part that I run externally from my main assembly after passing down the new file names to the part rule. Since I'm testing a lot, I'm always deleting the parts from the assembly, then clearing out the new copies from my folder and running the rule again. Eventually after 1-5 times inventor starts giving me an error.
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
The More Info Tab:
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData) at Inventor.Document.SaveAs(String FileName, Boolean SaveCopyAs) at LmiRuleScript.Main() at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem) at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
The two other posts on here that deal with that error say it involves enumerating an array that is being changed and looking for an entry that is gone. I have a feeling it has to do with a left over variable (but this is all in iLogic rules so they get cleared at the end of the rule?), temporary files or remnant file references. It works again if I close the assembly and open it back up. Inventor 2013 SP 1.1
I have a surface model of a bin that I am going to use as a master for deriving sheet metal parts for each side of the bin. After creating Sketch 9, which defines the mating flanges of the sheets, I repeatedly get the error noted in the subject when I try creating a derived part from this file.
I narrowed the problem down to the sketch block I used to define the square holes or more specifically a dimension that appears in this sketch block. I originally drew the circle with the square around it within Sketch 9 and then used the Create Block command. Then I patterned the block along the edges and made the pattern symmetric about the mid point of the edge and placed the hole half way out on the flange. (Flange width is set as a user parameter "FlangeWidth"(1.5") and distance to hole is "FlangeWidth/2" or even just a raw value of 0.75").
Now once this dimension is added to the sketch it will also appear in the block editor for the 5-16 Carriage Square block. If this is deleted from the sketch and the block definition and the pattern of holes are left unconstrained in this one direction a derived part can be successfully made. BUT if a dimension is added to the sketch it will trickle down to the block definition and now a derived part will fail...
I realized that my holes are to be on the midline of the flange so I can constrain them there without a dimension and so I can work around this. I just didn't think dimensions to geometry not included in a block were added to the block definition.
Inventor 2013 x64 sp1.1
Workstation Specs:
Dell T7500 Dual Xeon E5620 @2.40Ghz 8GB Ram
NVIDIA Quadro FX580 4GB, Windows 7 x64 sp1
I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
INV 2013
I don't think I installed the 32-bit version PS CS6 Upgrade into Windows 7 64-bit after I downloaded it over a year ago. So, today, I went to execute Photoshop_13_LS16.exe file and I got the error message:
"The file archive part of Adobe Photoshop CS6 is missing. You need all parts in the same folder to extract Adobe Photoshop CS6. Please download all parts."
I have C3D 2012. I want to label a part of an arc. The arc has 3 lines that intersect it. I want to label the overall arc and the pieces of the arc. The overall arc is not a problem. How can I label the parts of the arc without breaking it up?
View 5 Replies View Related[ URL]............
One of the problems we face in 2010 is the part labeling issue, where it labels the family name for a part and not the description name. The way to get around this was to do a swap part. Well for me when i lay out a storm network, i create it by pipes only and then swap the parts that i need to. The only flaw about this is that you can only do one swap part at a time.
Well if you go to civl3dreminder blog site there is a fix for that. I actually tried it and it worked. I was actually able to swap pipes and structures at the same time. This routine will definitely come in handy.
So, I finally got a 3d solid part published with the one attachement point (autodeskconnectionpoint). Looks great in object viewer with a pipe connected to it. However, put it in profile, and my 8' tall item shows like 1.5ft tall.
content file available, though this won't let me attach it?
I have a user who has an alignment from 0+00 to around 85+00. I t is used for a lot of designs and such so it needs to stay. The user however has a plan that he only wants to display 44+00 to 85+00. Other than exploding it, is there a way to not display the alignment before a certain station?
View 2 Replies View RelatedEverytime I try to join a room I get this error "Part of the roof to be joined misses the target face"
View 5 Replies View RelatedGetting error message 1305 installing organizer part of Elements 12 on DVD? Could this be due to a upgrade version on new computer
View 1 Replies View RelatedI am trying to learn Part Builder to create a custom inlet structure. I am able to build the part in Part Builder so it looks like it should and seems to work correctly when I change part sizes. I run into trouble when I try to change the model parameter for Structure Height (SBSH) to a formula invovling Rim to Sump Height (SRS). When I do this and then go to Edit Size Parameters, I get an error " one or more calculations have failed". It does not seem to make any difference what formula I use for SBSH or what size parameter or model parameter SBSH was set to before I entered the formula.
I am able to save the part without any other error messages, however, when I look at the .xml file, SBSH is a constant and not the formula I entered. I can edit the .xml file to enter the formula that I want but still the part does not function properly in a drawing.
I can make a pipe network using the new structure, however, the pipe inverts are not the same as the sump elevation of the structure. They are usually several feet below the sump. I can get the structure sump to match the pipe inverts by going to "Connected Pipes" under "Edit Structure Properties", highlighting the pipe invert elevation and then clicking "Apply". If you change the pipe using "Edit pipe properties" after this, the structure invert does not update as it should.