AutoCAD Civil 3D :: Multiple Street Names For Single Alignment
Mar 7, 2012
I have a single street alignment that looks like an “n”. My issue is the west side of the “n” is named “Main Street” & the east side is named “First Ave” in the real world. Is there a way to have an alignment name from station 1+00 - 10+00 be different than 10+00 - 20+00 for automatic label purposes? I would rather not break the alignment since it one long continuous street & in some instances there is a vertical curve within the breakpoint. JUst need to figure out how to use automatic lables for naming street intersections.
Using C3D 2010 but curious on newer versions too.
View 1 Replies
ADVERTISEMENT
Sep 28, 2012
I've created a network of my stormsewer (which means the stormsewer lines are all on different streets) and added the inlets to my street profiles.
How do I get the profile structure labels to reflect the stationing from the street alignments?
View 2 Replies
View Related
Feb 21, 2012
I'd like to use dynamic annotation to get street names for a community based on US Census TIGER data. How to get the text rotated to be along the street centerlines. What I've done is to take the TIGER edges, select the roads with assigned names and map imported them. now when I define the annotation, I can use an expression for the rotation angle, but is there a way to extract the angle of a polyline in terms of first & last vertex (or even better, the angle at the midpoint)?
Otherwise, I'll manually rotate the affected labels, but it sure would be nice to automate things...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
View 7 Replies
View Related
Feb 26, 2013
I've a map of an area, which has more than 50 streets and I want to name the streets from the excel work sheet. The streets are polylines. I want to show the street names on the polylines.
View 9 Replies
View Related
Nov 26, 2012
I have a data shortcut file where i keep my EG surface that now has File Name.dwg [DS] [DS] [DS] [DS]. What's the deal? Has this managed to morph itself into something it's not. It used to have only one, had two for awhile, and now 4 references to the DS (Datashort cut project folder).
Have I done something wrong here to get these wonky file names, would be nice to see just 1 reference being made to my DS Project folder.
View 2 Replies
View Related
Apr 25, 2012
Just wondering if it possible to flip multiple alignment labels at once or do yo have to pick them individually and then flip?
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 6 Replies
View Related
Jan 25, 2011
For some reason when I try to "Create Reference" to bring in my Alignment, Finished Ground and Existing Ground I get three different alignment data shortcuts instead of them grouping into one. I am trying to find out where in my workflow this all went wrong.
I have a .dwg that just has my alignment files in it. Then I make a new drawing and data shortcut in those alignments and Surface. I make my profiles and then create the data shortcuts for those. I start a New drawing and try to reference the alignment and profile and I get duplicated that aren't grouped. If you take a look at the two .bmp's you can see what happens.
The Purple highlighted area is how I want it to show up and that one worked just fine. Same work flow. The yellow is what is giving me a hard time.
View 9 Replies
View Related
May 22, 2012
Is there any way to associate multiple pipe structures to one alignment. I spend half my time re-associating structures to alignments.
View 1 Replies
View Related
Dec 6, 2012
Is there a way to have multiple elvations on a single point?
Such as with a top & bottom of curb.
I have tried to add a component to the style, assign the name as the control, and put in the elevation
I want, but you can't have multiple points with the same name.
View 9 Replies
View Related
Jul 9, 2012
using Civil 3d version 2012...Want to add existing and proposed profile grades to cross sections for the eastbound and westbound lanes. I have an alignment established for each
View 2 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Mar 19, 2013
I am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.
View 3 Replies
View Related
Aug 24, 2010
I have a design file that has and alignment with 3 profiles (one surface profilke and two layout profiles)
All these are data referenced to the project. Then they are data referenced into a new file. I bring in one of the profiles that brings in the alignment. Lets call it "Main Street". Then I create another reference to another one fo the profiles and it brings in a copy of an alignment and calls it "Main Street (1)"
This is a pain because I cant get a profile view to show all the profiles because the profiles are associated with three different alignments "Main Street", "Main Street(1)", "Main Street(1)(1)"
This is only happening with one of the of the alignments. The other alignment has all its profiles listed under one alignment.
View 6 Replies
View Related
Sep 20, 2012
how can i insert open street map file (osm) in autocad civil 3d 2012.
View 5 Replies
View Related
Jun 27, 2012
We recently began experimenting with SSA and are trying to verify the inlet calculations that were done in excel to make sure we understand the software before putting it into everyday use. We've created a custom parabolic street section and applied it to the bypass links, and as far as that aspect goes, we understand it and it's all working great.
How to model inlets directly across from each other in a street section. The issues arise when the top width (of Inlet 1, in the attached graphic, for example) exceeds the half section width and flows over the crown into the opposite side of the street (to Inlet 2, in attached graphic).
We have tried weirs and flow diversions to no avail. Attached is an example of what I'm trying to explain. Inlets 1 and 2 are opposite from each other, and both connect into a MH labeled SD-J 29+33.00. Link-05 connects to the next downstream MH, and there are 2 links that follow the gutter lines to the North used as bypass links from Inlets 1 & 2.
Civil 3D 2014
Windows 7 Professional
Intel Xeon E31270 @ 3.4 GHz
8 GB, 64-bit
View 3 Replies
View Related
Mar 17, 2009
I have a few questions regarding spread/street capacity:
When calculating the spread at the catch basin locations, how does it determine the curb height?? Does it always assume 6"?? what if it is a roll curb??? is it olnly determined by the "throat height" of the inlet?? How can I calculate my spread on random spots throughout the street??
View 5 Replies
View Related
May 28, 2012
i've made a serpantine curve that starts from one line of alignment and end on the other line.
i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?
View 3 Replies
View Related
May 3, 2012
I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.
Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.
I've attached a screen of the beginning of the alignment.
Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM
View 5 Replies
View Related
Jul 18, 2013
Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created? For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y? It seems like this should be pretty easy, I must be missing something obvious.
View 2 Replies
View Related
Apr 6, 2013
I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.
Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?
View 9 Replies
View Related
May 20, 2013
I'm trying to edit some existing alignments. When I create new entities, they do not show up in the alignment grid view. Why is this?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 5 Replies
View Related
Aug 11, 2013
Launching alignment grid view/alignment entities,
I’m wondering if there is a way to launch alignment grid view/alignment entities (attached) without the need to first launching “alignment”? This dialogue box is quite essential in editing the values of radius, degree of curvature and deflection angle for the selected curve.
View 2 Replies
View Related
Aug 8, 2012
Can I inherit the station from one alignment as the begin station for another alignment?
For example. Alignment 1 is 1000 ft long and starts at sta 0+00.
At sta 8+01, Alignment 2 begins and goes off in another direction.
I manually enter 8+01 for begin station Alignment 2. Life is good. Still in the design stage, and customer needs to modify Alignment 1 to avoid something. Now Alignment 2 intersects Alignment 1 at sta 8+15, but same N/E coordinates.
I manually enter 8+15 for begin station Alignment 2.
It would be better if Alignment 2 could inherit the begin station based on the new stationing from Alignment 1.
View 7 Replies
View Related
Aug 16, 2013
I have several architects who use VectorWorks that then export their electrical to me in a dwg format. I then use a program that makes intelligent devices from their blocks. The problem is that if there are 300 receptacles that are exactly the same, there is be 300 different block names for then such as group_205-1. In the past I just individually insert my intelligent block over each one of their blocks. But Now I am wondering if there is a way to select all the blocks and give them the same name and not have them all disappear because autocad sees them as duplicates.
I tried block replace, but it is one at a time and it gets rid of the old block. I then downloaded a trial of mblockreplace.vlx. However, it seems to also make all the blocks disappear. How to give the blocks the same name in a multi-select fashion without them all disappearing afterwards?
View 9 Replies
View Related
Aug 4, 2011
I've been given about 14 DWGs from another company all on different discs. Each DWG is a page to a set of Shop Drawings. All objects are in model space. I want to combine all of them into one drawing but every drawing has similar block names with different objects associated with the block and when I copy the objects from one drawing to antoher, the blocks morph into the exisiting block, if that makes sense. Just a poor initial set up.
Anyway, the solution to this, I have found, is to rename the blocks in each drawing to have room numbers on the ends, giving them unique names and avoiding the "morph" upon inserting. I have about 15 blocks per drawings to add -XX with XX being 01-14. Is there an easy way to modify them or do I need to do the RENAME command as many times as needed in each drawing?
View 4 Replies
View Related
Jun 24, 2013
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies
View Related
Jul 3, 2013
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
View 4 Replies
View Related
May 29, 2012
I have several DXF files that I would like to bring together into a single AutoCAD file so I can put all the pieces I have together on a single screen. How do I do this?
Also, when I am able to do this, is there a way to give points to my separate objects so I can match them up with other points of other pieces that it's supposed to fit up to? I'm pretty new to AutoCAD
View 4 Replies
View Related
May 31, 2012
I currently have 2007 installed on my computer and we just upgraded 2 of our seats to 2013. Can I install 2013 and still have 2007 on the computer? Will that screw up running either one? Will they conflict each other? I will eventually uninstall the 2007 version, but want to get 2013 up and running quickly.
View 6 Replies
View Related
Mar 18, 2013
I seem to be having an issue publishing multiple layouts into a single PDF.
All the layouts are setup to plot to 'Adobe PDF' and in the Publish options I have set 'Publish to: Plotter named in page setup' as well as 'Multi-sheet file'. When I click OK I'm prompted for the filename for each layout and have to save them as separate files.
The only time it does work is when I choose 'Publish to: PDF' which I guess uses AutoCAD's internal 'DWG to PDF' method. Is my preferred method an Adobe issue or is it fixable through AutoCAD?
View 9 Replies
View Related
Feb 12, 2013
except for the quantity of the line . the case is I was taught to make a title block tempelate. For each single item, like text"STUDENTS NAME " or "PART NMAE" , and inluding the attributes, I was instructed to use single line text instead of mutliple line. I was told that single line won't change. What does it mean it won't change?
I feel that single line is more precisely controlled ,while the multiple line text is more ofen used in puting the notes in a drawing. But in what case use what I am confuesd. Especailly when make the tible block, It seems to use the single line text is the unique way to make each feature in its status.
View 2 Replies
View Related
