I am trying to use a file of data that have 1.8 million of points, and is rally difficult with Autocad Civil 3D, the fiel open with the Autocad, but when I try to erase some of that points, the software is freeze.
for example:
the picture attached contains a lot of points with one blue line, the points on the blue line are the points that I am interesting, and the other points are the points that I want to erase.
After installing Inventor 2009, you may find that other software on your machine now has connection issues such as Apache Web Server, Skype or other servers/programs that are configured to use port 80.
This is because Data Management Server 2009 is configured to connect to that port every time you reboot your computer. If you go to your Windows start bar, select 'Run' and type in services.msc, you will see a list of services. Scroll down to 'Autodesk EDM Server', its' Status' should be labelled 'Started' and its 'Startup Type' should be 'Automatic', which means that this service is started when you turn on your machine, thus connecting to port 80 automatically.
You could change the 'Startup Type' to 'Manual', so that any of your other servers/progams that need to connect to port 80 will function properly, but that would limit the ability for Inventor 2009 and other programs that are configured to use port 80 to run simultaneously. You would also have to manually start this service every time that you require to use Inventor 2009 and the Vault.
If you don't mind EDM Server to hang onto port 80, but you're having connection problems with Skype, then change over to another port for Skype. Open up Skype, goto Tools -> Options -> Advanced -> Connection. If the checkbox is selected for 'Use port 80 and 443 as alternatives for incoming connections', then uncheck it and restart Skype.
So, how do you configure EDM Server to connect to another port? There are four configuration files that need to be changed, so the default of port 80 is not used.
1. C:Program FilesAutodeskData Management Server 2009ADMS ConsoleConnectivity.ADMSConsole.exe.Config
Change port value to 8081:
<connectivity.vaultmanager>
<webServer>
<add key="SSL" value="0" />
<add key="PORT" value="8081" />
</webServer>
</connectivity.vaultmanager>
2. C:Program FilesAutodeskData Management Server 2009ServerDispatchConnectivity.WindowsService.JobDispatch.exe.config
Add port number 8081: <add key="Server" value="127.0.0.1:8081" />
3. C:Program FilesAutodeskData Management Server 2009ServerWebServicesWeb.config
Change port value to 8081:
<connectivity.web>
<server port="8081" sslRequired="false" />
</connectivity.web>
4. C:Program FilesAutodeskData Management Server 2009ServerWebserverConnectivity.EDMWS.Server.exe.config
Change port value to 8081: <webserver runMode="service" port="8081" useHttpSys="auto">
You will have to restart 'Autodesk EDM Server' in services for changes to apply.This should eliminate your connection issues. Why Autodesk has decided to use 80 as the default port number without an easy way to change this through the console is just silly in my opinion.
I am working on customizing our content center, or at least learning about how to do it and am getting completley lost. Maybe it is just the termonology. In the Wiki help instructions I am instructed to open the "data management server console" and a path is given in the last line.
When I follow this path the only options I find under Autodesk data management are: links to open the vault or to open the auto loader.Am I missing something, or is the main opening screen to the vault what is considered the server console? I am also looking for where to open the "Content Center Editor"
Since the content center parts are EXCELL baised I should be able to do most of the editing once I figure out how to get into them but I am having a hard time getting there. The one thing I am not sure I am going to be able to figure out is that I like to place a work datum midway between the start and end datums. It is an easy job to place an offset datum from the start datum and then go into the propertys and set the offset + B_L/2. However I am not sure how to create this datum in the family prior to creating the instance.
I was getting this error on one of my users machines, inventor 2013 vault add in could not find the data management services
I uninstall Vault workgroup 2013, Inventor 2013, re install, and re install add ins, worked for half a day, and just got the same error again,
it seems As Inventor looses the add in, what was intersiting it gave an error about some unerlaying error after disgarding that, the add in doesnt work anymore.
I also cant copy design from vault on the same machine, all Inventor related files cant be copied, but dwg files can.
I get the feeling its an Inventor issue, my last resort is a clean install.
Since I've updated to Photoshop CC, something has changed in the way the information and data fields display in menus and windows to where I can't see them fully or can't see what I'm entering into them. See the image below for reference.
This is happening to Photoshop CC (both standard and 64-bit version) and somehow has applied this to my CS6 versions of Photoshop. I've updated my other programs to CC (Illustration and InDesign) and don't have this issue. They are working fine.
I've done the following to correct the issue, but have not been able to resolve the issue:
- shut down and restart computer
- change image resolution for my monitor
When I upload jpg files that have been saved in photoshop CS3 to my account on Flickr, an excessive amount of information appears in the exif data. In particular, there is a list of every time that I have edited and saved the file. How can I eliminate this information?
View 2 Replies View RelatedI have a number of unchipped manual focus lenses (Zeiss and Nikon). As a result, no lens information is recorded in the EXIF/Metadata file. How am I able to update this information? What applications are available to use if not by Adobe. Note: I do use LR3 and PS CS5.
Currently under the library table and Metadata filter these unchipped lenses read "0.0mm f/0.0". Note I do use the set up in my camera menu to notify the camera's focal length. So when I move the cursor over the photo is will indicate the focal length. Its just this information can't be used as a filter or for search.
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies View RelatedI've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
read that color management pdf by gennady petrov and tried a few things he wrote. I turned off color management in the printer driver, chose corel to manage color, and the image default profile sRGBxxxxx. picture was way dark and ugly. tried several other profiles and same dark picture. hmm that did not work so well.
went back to the printer driver and disabled no color management, and chose the profile Adobe RGB. still kept corel as manager and chose A RGB as the profile and the print looked spot on. Have not had problems printing from corel because I have come up with my own system, but was quite surprised at the result from turning off color management in the printer driver.
Is there a way to retrieve superelevation values from Alignment properties to show on, for example curve tables?. I would like to display the super information along with curve geometry information.
View 1 Replies View RelatedI created a corridor utilizing a profile, assembly and alignment. Worked well. I then created a surface from that corridor. The surface type should be displaying contours, but I do not see any. What am I doing wrong? The corridor display shows it covering the area that it should cover.
I did this once before and I had trouble with it that time as well. I remember the fix had something to do with adding code data from the corridor to the surface. I used a "+" button, but now have no idea where I did this at.
My Engineer has a Hec-ras file that he has been working on and I need to change some of the sections. I don't want to re-export all of my sections to a .goe file and lose the work he has already carried out.
Is there any way of exporting the necessary sample line information into a CSV file, as I believe this will be the best way to make the changes to the hec-ras data without losing the work which has already been carried out.
I have a problem in Civil3d 2013 where at random I'll open up a drawing that previously had a point table created and all the point information has disappeared. All that remains are the Titles.
View 3 Replies View Relatedhow to make the label information X,W ,Z into the section views as you see in this pictures(Attachments)
pic1: COGO points in the corridor
pic 2: section view
Use:Civil 3d 2012
I would like to know how to get the feature line information using lisp?
At this point I'm looking for the angle between the end point where I pick the feature line.
My goal is to rotate the crosshair to match the feature line. I can do this with a line or polyline.
I'm mainly work in 3D software (C4D, 3Ds Max). I have a client that wants to do high end traffic renderings. They have supplied me with the Infrastructure Design Suite 2014.
I received an old Microstation file from them, which I have then brought in to Civil 3D. I would like to add surfaces to this file so then I can export to 3Ds Max, and use Civil View to incorporate the design, and then traffic simulation data from VISSIM.
I have researched the entire work flow, the only thing holding me up is adding the surfaces to this Microstation file. It seems this is maybe not very common as I am having a hard time finding any tutorials or documentation on the internet.
I have an aerial image in TIFF format.Can I get DEM information from this format? If yes, what should I do?
View 3 Replies View RelatedI have a 2 mile alignment of a railroad loop track and I am looking to generate a report that include both information at 50' increments and the curve data, i.e. PI, PT, so I can generate a staking report for the surveyors. I noticed that there are pre-canned reports that handle one or the other but not both.
View 2 Replies View RelatedI am creating exhibit drawings and legal descriptions for right-of-way and easement acquisitions. I'm using parcels to create the various objects for the exhibit drawings: parcels allow me to label the acquisition, area, and lines and curves. The parcel property gives me a 'mapcheck' description that I use to generate my legal description. All good.
How are people generating this sort of information for polylines? I will have polylines from my POB to my TPOB that I need to describe. I have artificially closed these polylines to create parcels from them so I can glean the information that I need, but that feels like a work-around.
I need to clip the grid lines at a certain station, but still show the information beyond. The Engineers here got quite comfortable doing that with Land Desktop, and we haven't found a solution to do this with Civil.
I know about clipping the grid (under Profile View Properties), but the ditch (for example) clips to that same station. I need to show the information to the start/end of the survery without grid lines.
Right now, our solution is to draw line over top of the grid lines, and make those lines print white. Therefore, covering up the grid lines underneath.
Using Civil 2011 and running Windows 7.
I have tried to edit the Properies of Parcel in Information and Description by using the following 2 methods:
Method #1: I started with Settings in Toolspace => work on Parcel Style and Label Style for setting up the desired data I want to input. Then I went to Prospector in Toolspace => Sites => Site 1 => Parcels => Property : 1 for editing the desired data.
Method #2: On the drawing area, I selected the created Parcel object by clicking on the Property : 1 to get the Properties tab. Then I edited the Information - Style, Parcel Area Label Style, Name. I went to Prospector => Sites => Site 1 => Parcels => Property : 1 => Information - Descrition for adding the desired data.
My questions:
Q1. Did Method #2 change any thing in the Settings in Toolspace?
Q2. What is advantage in each Method?
Q3. In the Settings for Method #1, I saw the following items:
Parcel
User-Pefined Property Classifications
Parcel Styles
Label Styles
Table Styles
Commands
What are User-Defined Property Classifications, Table Styles, and Commends for?
I'm a Sony user and installed the Lightroom 4 trial. It imported the old 3.6 catalog and gave me a nice new Lightroom 4 catalog. So far so good. Everything looked normal.
Now, when I import new .ARW (Sony Raw) pics into LR4, I'm not getting the lens information correctly. I use a tool call 'alphalensinfo' that reads .ARW files and creates .XMP files with the correct lens name. LR3.6 used to import the pics and read the XMP, giving a correct lens name in the LR catalog. LR4 seems to fail at this.
For instance, with my Samyang 8mm, Alphalensinfo would add the exif field to the XMP file saying "Samyang 8mm". LR3.6 then shows "Samyang 8mm" for the lens, after import. LR4 shows "---" for the lens.
Has something changed in the way LR 4 handles Lens EXIF information?
I have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies View RelatedIn the DWG of my AutoCAD Civil 3D 2013 project, I just created a parcel manually - see the first attched file. It had "Property : 1" on the original DWG, when I created.
I selected this parcel => Properties tab =>Information =>Style:Create/Edit=>Parcel Styleroperty=>Design=>Parcel name template=> Name Template/ Name: <[Parcel Style Name (CP)]>:<[Parcel Number]> was changed to SHC Lot: <[Parcel Number]> to get the new parcel name "SHC Lot : 1" on the DWG successfully - see the second attached file.
I tried to add some chemical results (23.5 mg/kg Arsenic; 66.7 mg/kg Lead; 88.9 mg/kg Mercury) into the parcel. So I selected this parcel => Properties tab => Information => Parcel Area Label Style: Create/Edit =>Parcel Name: => Layout / Label Style Composer/Component name: Parcel Name =>Text: Contents <[Name(CP)]>
I clicked on the "Arrow" sign to bring the <[Description]> into the right-hand-side of Text Component Editor - Contents. I don't know how to finish this step and how to close the "Properties of Parcel" tab on the left-hand-side of the DWG (The selection of Parcel is still on). How to finish the last step and how to close the "Properties of Parcel" tab.
I've to put the sections on static mode on my project 'cuz the surface corridor won't creating right, can i transport the informations of the static section to the surface and profile? Basically i'm trying to change the informations on the static section and actualizing my surface and profile using the section changes
View 3 Replies View RelatedSuccesfully producing a slope analysis exhibit using LIDAR topographic base information with this version of Civil 3D? I have followed the instructions as best I can and have had no luck. I am using a trial version and this is a big factor in whether or not I will ultimately make the purchase.
View 3 Replies View Related