AutoCAD Civil 3D :: Finding Line Types In Blocks
Mar 27, 2012
we got cad files from an older survey done for a realtor. Everything was in pretty bad shape, with blocks everywhere. Since then the drawings have been cleaned up significantly. But I am having issues with two line types referencing a .shx file we don't have. The line types will not come out in a purge or manual delete efforts. I tried to do a filter by linetype but it continues to feed back 0 selected. I am wondering if the line types are used in a block definition that isn't drawn anywhere on the screen.
Is there a way to determine what linetypes are used in what blocks? Ultimately once the lines that use the two linetypes are located they will be changed to a different one and purged out of the drawing.
View 5 Replies
ADVERTISEMENT
Aug 20, 2013
I am trying to figure out a way, or a best practice workflow to get my custom linetypes with shapes to begin and end with a shape.
View 4 Replies
View Related
Mar 7, 2013
i have line types i created for telco and electric...basically a letter T within lines and a letter E within lines. they look just fine in one drawing but now i'm in another drawing started by someone else and i need to use them but the letters are tiny and off center.
View 9 Replies
View Related
Aug 8, 2013
How to find no of times specific blocks used in a drawing?
View 9 Replies
View Related
Jun 14, 2012
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
View 4 Replies
View Related
Feb 15, 2012
I have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 6 Replies
View Related
May 21, 2008
We are looking for a column grid bubble dynamic block that will allow us to place horizontal or vertical grid lines while the text in the bubble remains in the upright position.
Another thing we need is to allow for column lines close together without overlapping bubbles. In other words, we need to have the ability to have a diagonal line from the bottom or side of the bubble to the column line which allows us to have all bubbles aligned no matter how close the columns grid lines are.
The attribute in the bubble has to be able to have XX.X to fit within the bubble with the first to X's to be either Alpha or Numeric and the last X to be Numeric only.
Can this be made to be Annotative too?
View 2 Replies
View Related
May 15, 2012
I need to show contour lines that have the elevations embedded in the line. Is there any way to create a line type that will allow me to select and/or change the text to be embedded in the line, without having to define a unique linetype for each elevation?
View 2 Replies
View Related
Jul 21, 2011
I am using the DWGPublishToGE tool in AutoCAD Map 3D 2012. I can get the images and blocks to finally show up in a fairly clear manner. I was using earlier versions of AutoCAD before and everything was exporting all choppy.
Now that I have the linework in I was hoping to accomplish two more things:
The line types aren't coming across properly (e.a.: dashed lines are continuous)The text, both within blocks and along the path, only comes in as text. It's not fixed to where it is in the drawing. For example, if I have a block with HH in it the line work comes in normally but the text part of the block does not.
See my two images I have attached. The first is the CAD version and what I am hoping to get to in GE. The second is what is happening in GE.
View 3 Replies
View Related
Sep 25, 2011
What type of line are you using to show electrical wiring in a house, I've used the arc line and I really don't like the flexibility of that, it want bend like I want it to. The next thing I'm trying now is to use a leader line without arrows, that works better, you can bend that little rascal all over the place.
View 6 Replies
View Related
Oct 22, 2013
i have a file that contains over 7,000 unused line types that will not purge. they are from imported dwg files.
i tried the fix below, but was told "file not found". any other methods available?
AutoCAD_2013_2014_DGN_CleanUp_Tool.exe
View 8 Replies
View Related
Jul 12, 2012
I am trying to update the companies linetypes to utilities the text alignment in linetypes added in the 2012 version. I have added the "U" setting to the linetypes, but don't understand why the text is not centering after being flipped. Below is the overhead line:
*OHL,OVER HEAD LINES ----OHL--------OHL--------OHL----
A,2.40,-.15,["OHL",L60,S=.06,U=0.0,R=0.0,X=-0.1,Y=-.03],-.1
View 3 Replies
View Related
Sep 1, 2013
im trying to create line types using the MKLTYPE command , im creating the text and the lines and the text in paperspace and im using annotative text (2mm height fixed) . ie: dashed line 100mm "WA" and another 100mm of dashed line (--------WA---------) , I Need this line in any scale to act the same.
Ive tried many times but the text size is bigger then 2mm and the lines override the text.
View 0 Replies
View Related
Oct 14, 2013
I have to ask one quetion that in my cad file there is lots of unused fonts & linetype which actual is not in use but still not deeted from that file
View 8 Replies
View Related
Nov 7, 2012
We've having an office wide problem of drawings getting bogged down with, in some cases, hundreds of linetypes. Not sure where the source of the problem is coming from but as we contiunally use the drawings they keep gaining more and more linetypes, like a snowball rolling down a hill, and the files become so large they are almost unusable. The linetypes don't purge out of the drawing and are not connected to anything. I've tried everything I can think of to clear out the linetypes and the only thing that seems to work is wblocking them. Which when we're talking about hundreds of projects consisting of hundreds of files is a lot of work. We do wblock the drawings in a project on occasion to keep the files usable but they just become infected again eventually.
What might work to clean them up on a batch basis? I've attached a file that's infected so you can take a look. This is a file that has never had anything xref'd into it and was created as a brand new file when originally created. At some point over the last 3 weeks it got infected with the linetype disease.
View 6 Replies
View Related
Mar 22, 2011
I’ve got some questions about custom line types:
1.How do I create Custom Line types that have specific TEXT in it? Like -----L-I-N-E-----
2.Then How do I load that Custom Line type every time I open a new CAD File Dwg.?
View 9 Replies
View Related
May 14, 2012
When I import shape files the polylines will not take the layer style I move them to. They stay a continuous linetype. Linetype and Lineweight is set to ByLayer. Only difference between the new lines and the lines drawing correctly is the lines that stay continuous are 3D polylines and the correct ones are normal polylines. What I need to do to make the imported lines accept my layer linetypes?
View 8 Replies
View Related
Dec 5, 2012
The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies
View Related
Oct 17, 2012
I want to add different assemblies (some with walls or ditches) along the same corridor at given stations
Can that be done?
View 4 Replies
View Related
Aug 5, 2011
I try to create a new pipe dynamic block. But I have a problem with my block. In the block, the distance2 I wanna change to some sizes follow the table. And the center line, it changes follow the sizes table, and must be center line when I change pipe size. I can not do it. How to make the block working correctly.
View 8 Replies
View Related
Apr 11, 2012
C3D 2010
I know you can set the view port type in your template for sheet setup controls...
BUT - I have a situation where we have profile xrefs of utilities, in those utility profile drawings we must <DR> in the utilities in plan view. I don't want those utilities to show in my PLAN VIEW view port... So now I simply VP freeze the profile layers in the plan view... simple and easy...
WISH - that I could set my view port types to PLAN and PROFILE, and have only PLAN layers show in PLAN and only PROFILE layers show in PROFILE.... AUTOMATICALLY....
View 2 Replies
View Related
Oct 29, 2012
I am trying to import thousands of pictures into Lightroom as I have a mess of pictures do to a long story...But basically I have probably 30,000 pictures in a bunch of folders that I want to import.
One issue I have found is that I don't want to import TIFF, BMP, GIF, or things like PNG. I really only want jpg files or jpeg files unless I stumble across others in another format I haven't found yet.
Can I set something during the import? I have searched the forums and internet, but haven't found anything that mentions this.
How to clean up a mess like this where I have 30,000 pictures but probably only need 10,000 as there are duplicates upon duplicates due to having to move the pictures around in a hurry as I had a mess in my basement during a storm a couple years ago.
View 1 Replies
View Related
Nov 19, 2013
When I open the expression variables available in a label style, I see different options available for different label styles.Can I combine expression variables from different label types? For example, say I want to make an expression that takes the Surface Elevation from a spot elevation label and subtract a variable from a pipe variable such as end invert elevation?
If you can do this, were can I find the expressions file on my computer or network? Can they just be dragged and dropped between label styles?
View 2 Replies
View Related
Jun 1, 2012
I want to know is a point(for example p1) is on the right of an alignment?
View 3 Replies
View Related
Nov 29, 2013
I have made a 3D model of a frame for my work; when I try to add in the dimensions I cannot find the dimension between for example one horizontal line (in front view) and one vertical line. And sometimes when I manage to click on the two lines, it says "the lines are parallel".
View 1 Replies
View Related
Jul 25, 2012
I've just started using Paint.Net, primarily for pixel work. I needed a program that had the curve line tool but with extra features than the ones provided in Microsoft Paint. But it seems that I've came to a problem, the lines are anti-aliased, even at 1 pixel big. I was wondering if there was a option to turn the aliasing off for the line/curve tool.
View 1 Replies
View Related
Nov 29, 2012
I am having some difficulty figuring out how to get the extents to a civil 3d label object. I want to be able to select a label, and draw a custom polyline around it (in dragged state) and draw a leader or multiple leaders from that new polyline. I just can't seem to figure out how to get at the label data itself.
View 2 Replies
View Related
Dec 20, 2013
I went out with our GPS and shot each of our stock piles we have in our yard (recycle asphalt, 3/4" gravel, 1" gravel, etc.), and now I want to figure out how much of each pile we have
So what I did was create a seperate surface for each pile, then I created a volume surface for each as well and just set the base and compare surface as the existing, that wat was I can get the total sq ft of each pile, but now I want to figure out how much yards of material are in each pile
Would I need to set up a materials list for each on to calc how much are in each pile according to what type of material they are?
View 9 Replies
View Related
Jul 16, 2012
I'm running Civil 3d 2010
I have opened a drawing created by someone else and see that it is loaded with data shortcuts and they all seem to be working properly and displaying fine. The problem is that I would like to add some more shortcuts to the project yet I cannot find the folder where they are located on our server. I have opened up source drawings for every one of them and there are no data shortcut folders located in the same path as the source drawings nor in my project file. They have been stored miscellaneously somewhere on my server. I have tried searching by name (*.xml) for the data shortcuts on my server but the names are too generic and I get to many hits to locate the one I need. Is there any way to list a data reference and the program tell you the folder where it is getting it from?
View 5 Replies
View Related
Dec 16, 2013
I have a need to find the lowest elevation inside of a small rectangular polygon (6'x7'), then assign the polygon to that elevation. This is fairly easily done manually with feature lines, however I need to repeat the operation about 3,000 times to create a design grid (therefore, not obliged to using all of the design budget to do so).
I employed the GIS department to run the analysis, which they can do, however they can't rotate the DEM grid output to match my project because it doesn't run parallel to north/south, thus skewing the results.
View 5 Replies
View Related
Feb 18, 2013
where I can download standard USGS hatch patterns for identifying differnet strata in geologic columns. I know the USGS has standard patterns for specific strata and I was looking for a .pat file that has them all in it.
View 2 Replies
View Related
