AutoCAD Civil 3D :: Dynamically Linked Vertically Offset Design Profile
Dec 6, 2012
I have a design profile and now I want to create one that's linked to it but have it 0.5m lower than the profile I just laid out. Is there a way to do this? I'd like to keep them dynamically linked so when i manipulate the 1st profile it will drop the 0.5m lower profile. In theory this would be a great feature to have in CIvil 3D.
At this point I will likely need to copy the profile and drop it 0.5m in elevation with edit geometry. Not ideal considering when I adjust the main profile I'll need to redo that process to show the profile 0.5m lower than my main design profile. (used as a side slope target).
View 5 Replies
ADVERTISEMENT
Sep 14, 2012
I am creating construction plans sets that require 3 road profiles for the left edge, center and right edge. I would like to dynamically link the center line profile with the edge profiles.
I have created alignment offsets to obtain the existing surface at the offset location. I would like the edge profiles to have a vertical offset from the center profile. Also if I modify the center profile I want it to dynamically adjust the edge profiles.
View 9 Replies
View Related
Mar 28, 2013
I have created an intersection and for some reason, my secondary profile does not dynamically lock?
C3D 2012, SP1
Win7 - 64bit
View 5 Replies
View Related
May 7, 2013
After offsetting a profile line vertically, lets say minus 5 feet, for design purposes, is there a way to take that new polyline that is created and making it a polyline so it can be smoothed. Almost everytime, the enginner has asked me to smooth out that polyline that I have offset vertically, because it is now going to be used as a pipe in the final design. I have been drawing a polyline over the top of the profile line, so it looks smooth........
View 4 Replies
View Related
Apr 9, 2012
Every time I created surface profile, offset profile and sections it always at ZERO (0) LAYER. All label, grid, etc always at 0 layer. What is the correct way of doing it to assign at the proper layer?
View 5 Replies
View Related
Aug 12, 2013
I have seen "offset" and "update mode" for a layput profile.
Civil 3D (2013) how much you have to improve....
View 2 Replies
View Related
Apr 27, 2013
Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
View 7 Replies
View Related
Aug 10, 2011
I know it can be done usign Pipe networks and feature lines and a massive waste of time.. But I just want ot offset my FG to show a line constant offset. Can this be done? If so how?
Win 7 64bit
16 Gigs Ram
Intel i7 870
Quadro fx1800
C3D 2011/2012
ASUS Custom
Dual 24 Phillips screens
View 8 Replies
View Related
Mar 11, 2013
I have a psd dynamically linked to an Encore menu. When I go into PS my cursor has changed into what looks like a hand over a book or maybe a paint bucket.It wasn't there yesterday even though the doc was linked then as well...
View 2 Replies
View Related
Oct 12, 2006
Where the heck do I find the offset which controls the distance between the profile grid and my profile data band?
I have compared settings between ones that look the way I want and I'm just not seeing it.
(The attached doc shows you what I'm up to)
View 9 Replies
View Related
Jan 8, 2014
I need to design a project but ı cant..ı have two profiles in use for one alignment..ı want to use left profile for left side, use right profile for right side.and ı want to draw cross section only one..how can ı design like this project..
View 8 Replies
View Related
Jul 19, 2012
For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies
View Related
Jul 11, 2012
I'm trying to label the beginning and end points of a design profile (yellow line in the attached image) using the Horizontal Geometry Station Label tool. For some reason they will not show up.
View 1 Replies
View Related
Dec 15, 2013
Working in Civil 3D 2014 SP1 I have a Design Profile that I have created by setting the Existing Profile to 'Static' and Creating a Copy of the Existing Profile... This leaves me with a Design Profile that follows the Existing Surface. The problem begins when I delete a section of PVI's and introduce new 'Design PVI's'... I have found that at apparently random times my Design PVI's have been lost and replaced with the original copied PVI's that follow the Existing Surface. This has occurred more than once and I can't find any reason as to why this may be occurring...?
Currently using Civil 3D 2013 & 2014 SP1
View 6 Replies
View Related
Aug 15, 2012
I've got a highway project for which I'm modeling the corridor but the design profiles given to me are for the right lane top edge (ETW) and not the centerline (crown). This is an undivided planer roadway with a typical 2% cross-slope. How can I use that profile for the right edge to run my corridor? I can't seem to get the corridor to use the super table that is attached to the centerline when I use an offset assembly. Is an offset assembly the right way to go with this design?
What I've done just to get going is to take that right edge design profile and draw it in my centerline profile view, then lower it 0.24' (which is my 2% normal cross-slope for a 12' lane) and then use that as a centerline profile and let my normal super assembly and table data control the corridor through the supers. So far that is working--but is there a better way to do this?
View 4 Replies
View Related
Apr 9, 2010
how to create a label style for design center of road (simple tangent) in profile that will work between multiple profile views. I've used the 'Create Multiple Views' profile view wizard. I use a horizontal dimension style label for CL road (looks just like an autocad linear dimension). I'd like the label work across separate views i.e. stop at view end, pick back up at view start.
The label I currently use is simply a line component from tangent start dimension to tangent end dimension and the text component is anchored to the line midpoint. Label looks as intended for normal use. For some reason the line drops as if looking for the actual pvi at the right side when i use multiple views.
View 3 Replies
View Related
Apr 12, 2012
It seems like I used to be able to do this in 2012.
I created a design profile and used the copy profile command. I close the layout toolbar of the original design profile.
When i select the copied design profile to grip edit a pvi, the existing ground profile and copied profile disappears and i cannot grip edit.
I have also tested this with an OOTB template.
Question: How to be able to grip edit a copied design profile in 2012.
View 5 Replies
View Related
Dec 15, 2008
I have an existing ground profile, and a design profile. All I want to do is label the slopes of the design. When I click my line label style and turn on the text it labels the existing ground and the design ground. I cannot find the setting in my two profile styles to turn the slopes off in the existing ground.
Oh, how can I get a tick on the V.C. dimension line?
View 6 Replies
View Related
Oct 24, 2013
We have recently installed Civil 3D 2014 Service Pack 1, and while for the most part it works great, we are noticing one significant issue with profiles. In particular, when we have a design profile actively selected with grips showing, and then select one of the grips, the PVI you are editing becomes offset from the cursor. When you select a point with the cursor, the profile syncs back up as you would expect.
Just thinking out loud, but it seems like it would be some sort of graphic card issue, but we are seeing it across multiple machines.
View 9 Replies
View Related
Jun 26, 2013
I have 2 different surfaces (Existing Ground & Proposed Pipe Invert) that I want to have the elevations shown for in a profile data band, but I want them to show at the design profile's PVIs (Proposed Road). Is it possible to set up a data band style that samples at one profile's geometry points but displays the elevations from these points from a different profile? My workaround is to set the data bands to all sample from the design profile first and label over the design profile's data band but I'm hoping for a cleaner solution. Attached is an image showing the profile view in question.
View 5 Replies
View Related
Sep 28, 2012
i have a long alignment going through a lot of creeks. right now the creeks are in xref just polylines but it intersect with alignments at areas.
is there a quick way to show all these lines on profile for design and drafting purposes? ideally want to just show a line at each intersection would be fine.
tried using pipes takes too long to set up. this is one important feature to have in the software.
i can program it again but i have not enough time to finish this project by mid october if i keep programming things.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 6 Replies
View Related
Jun 7, 2013
I need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.
View 3 Replies
View Related
May 14, 2012
I am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
View 9 Replies
View Related
Apr 11, 2013
I've heard it said that it's possible to make two separate layout profiles dynamically dependent. For example, making a driveway centerline profile dependent on the roadway centerline profile it's connected to. The idea is that if you revise the roadway centerline profile, up or down, that the driveway profile will automatically go up or down with it.
Is this true? I didn't readily see anything in the profiles area of the docs or the tutorials.
View 5 Replies
View Related
Aug 17, 2012
I've created a surface from blocks but I need to move many of the blocks to new locations/elevations but if one of the blocks that formed part of the surface build is moved or elevation adjusted the surface doesn't update. I have to reselect and add the blocks to the definition, remove the original blocks and shunt the newly added block up the definitions list.
If Civil points are moved they automatically update the surface (as expected) so is there a list anywhere or which entities/objects will cause the surface to update automatically and which ones won't??
I don't generally get data in this way hence the question so I'm thinking the best way forward would be to convert to Civil Points and make point groups??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Aug 26, 2011
I have several architectural models linked into my central file on a project. For this project, there is an addition to the building that is a design option. When I look at the linked files, though, I can only see the existing construction. I also know how to copy/monitor levels, but I want to view the architect's room elevations in my model. How can I copy the architect's design options and specific views into my model?
View 1 Replies
View Related
Jun 21, 2012
Baffing issue for us:
We have a "core & shell" model linked into a "fit-out" model. We are working with design options in the "fit-out" model with different design options.
1. In a 3D axo view and working in the main model, we can see the linked "core & shell" file.
2. In the same 3D axo view and working in the primary design option, we can see the linked "core & shell" file.
3. In the same 3D axo view and working in any of the other design option, we CANNOT see the linked "core & shell" file.
The visibility & graphics settings have not been changed. The worksets settings have not been changed. We have been unable to overcome this issue. We are simply flippiing between different design options and the linked model disappears.
View 2 Replies
View Related
Feb 22, 2012
I have a Vertical profile made up of Lines, Rads, Arcs. How do I offset this profile in one command rather choosing each element. I am able to offset thease commands independatly but not has one item. I have tried converting to a polyline but this does not work.
View 9 Replies
View Related
Nov 22, 2013
C3D 2013
I am trying to figure out a way to get the cut and fill lines on my sheet files to dynamically update when I update my corridor.
My work flow:
Currently I have a model drawing with my corridor, which produces cut and fill feature lines.
I create a separate reference file with drefs, and then paste in cut and fill polylines (where I created from the feature lines).
Finally, I have sheet files where I xref in the reference file.
Is there a better way to deal with these cut and fill lines so they are dynamic when I change my corridor? I don't really want to xref in my model drawing just because it has all sorts of things in there..
View 2 Replies
View Related
Aug 11, 2013
I thought that Cut Profile would be working with linked models (with By Linked View) by now. I know it didn't work a few years ago, but we've just tried it in 2014 and it still isn't correctly displaying views that have had the Cut Profile tool used on them when linked into another file (using By Linked View).
View 3 Replies
View Related
Sep 26, 2012
is there a way to create a few profiles say at 0.5, 1.0, 1.5 and 2.0m vertically above the profile of the ground? without creating the surface again and change the elevation 4 times and making 4 data reference. using those lines for design guides for minimum fill requirements when doing FG profiles. before i just copy, then explode then move the original profile as a polyline. i actually have to explode the polyline after because it's laggy to zoom in the profile for some reason. once lines it's ok. but then again it's not dynamic. i changed my alignment and then those line stayed then have to do it all over again. this maybe a good feature to have next version.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 9 Replies
View Related
