I want to change the blocks and hatch double click actions, but when I open the cui customization there are no commands listed in the "double click action" option. Double clicking does in fact work properly, so there should be no reason the default cui (C3d.cuix) does not show any commands in the "double click actions" option.
View 2 RepliesHow to add the quick elevation edit for feature lines to the double-click actions? I have tried everything under the sun (except for the right thing) to get it to work.If the issue was resolved by this method, please click on "Accept As Solution".
View 2 Replies View RelatedJust installed 2013 and have a couple of buggy problems.
1.I can't double click on dims to add / edit text. I've added / changed the cui double click settings but that does work.
2.The new array command does bring up the associated ribbon panel after the array has been created. I can get this to work while using Civils as AutoCAd, but not as Civils?
I have altered my CUI so when I double click on civil 3d objects it opens up their properties for quick editing. Never had a problem pre 2013 and I am sure this is something I did but am lost.
Every time I double click on any object it just opens up the properties box. It skips right over my double click customization.
is there an option that im missing to allow me to edit attributes in a block? i have set QAFLAGS to 0 and my pickfirst is set to 1.
View 5 Replies View RelatedWe'll I'm not sure what happen here but, I can not for the life of me figure out why the double-click stopped working
PICKFIRST = 1
DOUBLECLICKEDIT=ON
and the Noun/Verb is checked . When I look at the CIVIL CUI, I do not have any double - clicks but the ACAD CUI does - this is load too right.
I was just wondering if you can customize your interface so you can edit note labels (or any labels for that matter) by double clicking. I've already gone throught the cui files but I can't find anything. Am I missing something. c3d 2007
View 9 Replies View RelatedI must have changed some dam switch or something. DBLCLKEDIT is set to on and CUI is setup for some double click actions.
View 2 Replies View RelatedUsing 2012 in my CUI I could set the general note label to use the double click function. When I double clicked on any label I'd get the editor box pop up. Now in 2013 for some strange reason that no longer seems to work.
View 9 Replies View RelatedEvery time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies View RelatedI have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies View RelatedIllustrator CS4
I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more.
I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedMy friend here at work can't seem to double click on anything to edit it. If he single clicks it to say change the layer it wont change it. We have looked in our 'options' menu and everything is set up correct for double clicking. we have re started his computer but that didnt seem to work either.
View 4 Replies View RelatedI've just upgraded to ACAD 2012 from 2009 and have copied over my CUI settings and getting different results when Double clicking on regular ( not Dynamic ) blocks. The macro for this i've set to ^C^C_refedit.
This previously would automatically select the NESTED block in the list of reference names if double clicked on in the drawing, however now in 2012 the parent block is always selected and i need to hunt through the list to find the actual nested block that im wanting to edit.
Is there a setting / variable that has changed in the upgrades? I have Automatically select all nested objects selected in the Reference edit dialog box and all other options match my 2009 as far as i can tell.
Arcticad gave me code to work out the right keywords to search for. The only google hit was a chinese website.I added it to his/her code but didn't delete any of the existing handlers just in case.
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.ApplicationServicesImports AcApp = Autodesk.AutoCAD.ApplicationServices.ApplicationImports Autodesk.AutoCAD.EditorInput<Assembly: ExtensionApplication(GetType(VbExtApp))> Public Class VbExtApp Implements Autodesk.AutoCAD.Runtime.IExtensionApplication Private DocMan As DocumentCollection 'Initialize sub.
[code]....
The pre-loaded double click options in the CUI were getting really annoying, so I deleted all the double click attributes (while in the CUI tree) to have a clean slate to work with, but now I can't figure out how to add DDATTE to work on a double click.
I followed the Help guide and got all the way until it told me to "drag the command you want to add the double click action in the Customizations In <file name> pane", but I cannot find the DDATTE command in the Command List.
Trying to change the Hatch double click command from quick properties to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
My mouse has a nasty habit of accidentally double clicking when I don't want it to and the VPMax command is really infuriating me. Is there a way to disable the double click to VPMax?
View 1 Replies View RelatedWhen I go into CUI & try to customize the double click for say line & set it to bring up the properties box it works, but it changes all double click actions to do that unless there is already a default double click for a particular command. When I set the double click in the hatch command to edit the hatch (hatch box pops up) it works but it will change the line double click to do the same thing. I don't remember having this problem in 2009. I'm saving in the CUI every time I try this.
View 6 Replies View RelatedDouble click editing does not work even though it is selected in options. Also, when I try to rotate a view in mv setup it rolls 180 degrees instead of the 90 I entered. Use 2007. Do I need to reload?
View 9 Replies View RelatedI'm using ACADlt 2014. When I'm doing a command like offset and want to change the amount of the offset, I usually double right click to get me to a command that I can put in a new distance. The problem is when I do a quick double click it has a pause and will not do the second click. If I wait and take a couple of seconds between clicks, it works fine. I have my "right click customization" turned off. Is there a setting that I can turn down the pause or get rid of it?
View 3 Replies View RelatedMy double click edit function is not working even though...
DBLCLKEDIT is <ON>
PICKFIRST = <1>
and my noun/verb selection box is checked
Displaying a vb.net form when an autocad block reference is double-clicked. Unfortunately, I still don`t know how to capture the double-click event for a block reference from code. I have gone down the IMessageFilter path, still no success.
I have tried the addHandler for application using code supplied to me in my previous post, still no luck. I really need to be able to capture the double click event for a block reference in autocad, without overwriting the default autocad double-click behavior.
I wish to be able to double-click a block reference, capture its name, and, if the name is same as blocks created by my form, then I`d simply have my dot net form pop up, displaying a few of the block`s properties.
Below is the code module I am using, which isn`t working ofr me:
' System
Imports Microsoft.Win32
Imports System.Reflection
' AutoCAD
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.Runtime
Imports acApp = Autodesk.AutoCAD.ApplicationServices.Application
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.EditorInput
[code].......
And the Commands class, from which my vb.net form is generated, as well as where the ModDoubleClick.eventDoubleClick() method is called:
Public Class Commands
' Component for displaying the Mass Straight Conveyor form
<CommandMethod("mst")> _
Public Shared Sub massStraight()
Try
' Call this to override default block dblclk event handler
[code].......
Using LT 2014 on Win 7 Pro.
Recently got a new PC and due to problems with regular LT crashes I have recreated my customizations etc. from scratch.
Finally seem to have got everything working OK and how I it was on my old PC, other than one minor issue.
I have edited the CUI so that the "old" attribute editor (ATTEDIT) is launched rather than the enhanced (EATTEDIT) version.
However after double clicking a block a further third click is required to select block/launch editor.
Editing CUI back to EATTEDIT works ok with only a double click required.
I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
there is problem with my auto cad.when i double click on dwg file, Auto cad run and file open in it....its ok...same time when i click another dwg file Autocad run again Separately and file open in it not in already running Autocad. if i open 2,3 or more dwg files same time each time Autocad run separately.
View 9 Replies View RelatedMy office has just installed 2012 on a couple of extra machines. Our installs were fine before but for some reason we can't double click to edit text or attributes any more. I've checked MTEXTED = INTERNAL and DBLCLKEDIT = 1 but that's not it. We can type ED or ATTEDIT to edit attributes normally, or MTEDIT to edit mtext but we don't get the normal text formatting bar or ruler. It's just looks like were using the dxtext editor, but it's not dtext.
View 9 Replies View RelatedI wrote a couple of functions one of them creates a block with a Name let say "MyBlock".
I wrote a command "MyBlockEdit" where the selected block attribute data is displayed in a custom form to change some of the properties.
Now I want to add the folowing function:
When a block with the blockname "MyBlock" is doubleclicked the command "MyBlockEdit" is triggered in place of the attribute editor.
Does Inventor use the mouse double click speed settings from windows? I have set my windows double click to be quite slow but am finding I have to double click in Inventor a number of times before it works. I presumed I was clicking to slowly. Changing the setting in windows did not work?
View 1 Replies View RelatedIn Older version could Double-click the dimension text to open it in a text editor. 2012 does not. How do I change it so it will work.
View 3 Replies View Related