AutoCad :: LT 2014 - Pause On Right Double Click
Jun 19, 2013
I'm using ACADlt 2014. When I'm doing a command like offset and want to change the amount of the offset, I usually double right click to get me to a command that I can put in a new distance. The problem is when I do a quick double click it has a pause and will not do the second click. If I wait and take a couple of seconds between clicks, it works fine. I have my "right click customization" turned off. Is there a setting that I can turn down the pause or get rid of it?
View 3 Replies
ADVERTISEMENT
Jul 2, 2013
First, MY specs.
Processor: AMD A6-5400K APU (with Radeon HD Graphics) - 3.60 GHz
RAM: 8.00 GB
System: 64-bit
OS: Windows 8
Version: AutoCAD 2004 LT
Second, what we do.
Commercial MEP design. Project in mention is a 65,000 sq.ft. Italian food market.
Third, the problem.I am experiencing a selection and double click editing problem with AutoCAD 2012LT & AutoCAD 2014LT. On Friday, June 28th we recieved updated (not new) backgrounds from a lighting designer for two floors of the building whose MEP system we are engineering. The second floor had no problems really; we reset some annotation scales and the updated backgrounds plugged right in. The first floor, however, was so messed up that we copied and pasted the track lights and all else into our file directly (vs. xref'ing) and instantly, after a save, it is impossible to evoke any kind of edit with double click. In order for us to modify anything, we have to type the command before editing. So if I want to DDEDIT, I have to type that in before changing the text. If I do select the text first than CAD freezes, takes a huge dump, wipes for 5 minutes, and then the text editor appears. This problem is ubiquitous with all 2012 LT machines and up. AutoCAD 2005 LT has no problem (lmfao).
View 5 Replies
View Related
Apr 17, 2012
I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies
View Related
Jan 4, 2012
Illustrator CS4
I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more.
I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
View 8 Replies
View Related
Jul 18, 2013
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies
View Related
Sep 6, 2011
My friend here at work can't seem to double click on anything to edit it. If he single clicks it to say change the layer it wont change it. We have looked in our 'options' menu and everything is set up correct for double clicking. we have re started his computer but that didnt seem to work either.
View 4 Replies
View Related
Mar 4, 2012
I've just upgraded to ACAD 2012 from 2009 and have copied over my CUI settings and getting different results when Double clicking on regular ( not Dynamic ) blocks. The macro for this i've set to ^C^C_refedit.
This previously would automatically select the NESTED block in the list of reference names if double clicked on in the drawing, however now in 2012 the parent block is always selected and i need to hunt through the list to find the actual nested block that im wanting to edit.
Is there a setting / variable that has changed in the upgrades? I have Automatically select all nested objects selected in the Reference edit dialog box and all other options match my 2009 as far as i can tell.
View 4 Replies
View Related
Jul 18, 2013
I want to change the blocks and hatch double click actions, but when I open the cui customization there are no commands listed in the "double click action" option. Double clicking does in fact work properly, so there should be no reason the default cui (C3d.cuix) does not show any commands in the "double click actions" option.
View 2 Replies
View Related
Jul 11, 2011
Arcticad gave me code to work out the right keywords to search for. The only google hit was a chinese website.I added it to his/her code but didn't delete any of the existing handlers just in case.
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.ApplicationServicesImports AcApp = Autodesk.AutoCAD.ApplicationServices.ApplicationImports Autodesk.AutoCAD.EditorInput<Assembly: ExtensionApplication(GetType(VbExtApp))> Public Class VbExtApp Implements Autodesk.AutoCAD.Runtime.IExtensionApplication Private DocMan As DocumentCollection 'Initialize sub.
[code]....
View 9 Replies
View Related
Nov 19, 2011
The pre-loaded double click options in the CUI were getting really annoying, so I deleted all the double click attributes (while in the CUI tree) to have a clean slate to work with, but now I can't figure out how to add DDATTE to work on a double click.
I followed the Help guide and got all the way until it told me to "drag the command you want to add the double click action in the Customizations In <file name> pane", but I cannot find the DDATTE command in the Command List.
View 9 Replies
View Related
Feb 4, 2013
Trying to change the Hatch double click command from quick properties to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
View 1 Replies
View Related
Feb 19, 2012
My mouse has a nasty habit of accidentally double clicking when I don't want it to and the VPMax command is really infuriating me. Is there a way to disable the double click to VPMax?
View 1 Replies
View Related
Aug 29, 2013
When I go into CUI & try to customize the double click for say line & set it to bring up the properties box it works, but it changes all double click actions to do that unless there is already a default double click for a particular command. When I set the double click in the hatch command to edit the hatch (hatch box pops up) it works but it will change the line double click to do the same thing. I don't remember having this problem in 2009. I'm saving in the CUI every time I try this.
View 6 Replies
View Related
May 17, 2012
Just installed 2013 and have a couple of buggy problems.
1.I can't double click on dims to add / edit text. I've added / changed the cui double click settings but that does work.
2.The new array command does bring up the associated ribbon panel after the array has been created. I can get this to work while using Civils as AutoCAd, but not as Civils?
View 1 Replies
View Related
May 27, 2013
I have altered my CUI so when I double click on civil 3d objects it opens up their properties for quick editing. Never had a problem pre 2013 and I am sure this is something I did but am lost.
Every time I double click on any object it just opens up the properties box. It skips right over my double click customization.
View 3 Replies
View Related
Oct 23, 2007
Double click editing does not work even though it is selected in options. Also, when I try to rotate a view in mv setup it rolls 180 degrees instead of the 90 I entered. Use 2007. Do I need to reload?
View 9 Replies
View Related
Jul 22, 2008
My double click edit function is not working even though...
DBLCLKEDIT is <ON>
PICKFIRST = <1>
and my noun/verb selection box is checked
View 9 Replies
View Related
Nov 26, 2012
Displaying a vb.net form when an autocad block reference is double-clicked. Unfortunately, I still don`t know how to capture the double-click event for a block reference from code. I have gone down the IMessageFilter path, still no success.
I have tried the addHandler for application using code supplied to me in my previous post, still no luck. I really need to be able to capture the double click event for a block reference in autocad, without overwriting the default autocad double-click behavior.
I wish to be able to double-click a block reference, capture its name, and, if the name is same as blocks created by my form, then I`d simply have my dot net form pop up, displaying a few of the block`s properties.
Below is the code module I am using, which isn`t working ofr me:
' System
Imports Microsoft.Win32
Imports System.Reflection
' AutoCAD
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.Runtime
Imports acApp = Autodesk.AutoCAD.ApplicationServices.Application
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.EditorInput
[code].......
And the Commands class, from which my vb.net form is generated, as well as where the ModDoubleClick.eventDoubleClick() method is called:
Public Class Commands
' Component for displaying the Mass Straight Conveyor form
<CommandMethod("mst")> _
Public Shared Sub massStraight()
Try
' Call this to override default block dblclk event handler
[code].......
View 9 Replies
View Related
Dec 10, 2012
is there an option that im missing to allow me to edit attributes in a block? i have set QAFLAGS to 0 and my pickfirst is set to 1.
View 5 Replies
View Related
Sep 19, 2013
Using LT 2014 on Win 7 Pro.
Recently got a new PC and due to problems with regular LT crashes I have recreated my customizations etc. from scratch.
Finally seem to have got everything working OK and how I it was on my old PC, other than one minor issue.
I have edited the CUI so that the "old" attribute editor (ATTEDIT) is launched rather than the enhanced (EATTEDIT) version.
However after double clicking a block a further third click is required to select block/launch editor.
Editing CUI back to EATTEDIT works ok with only a double click required.
View 9 Replies
View Related
Jun 7, 2012
I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
View 4 Replies
View Related
Jun 16, 2010
there is problem with my auto cad.when i double click on dwg file, Auto cad run and file open in it....its ok...same time when i click another dwg file Autocad run again Separately and file open in it not in already running Autocad. if i open 2,3 or more dwg files same time each time Autocad run separately.
View 9 Replies
View Related
Apr 18, 2012
My office has just installed 2012 on a couple of extra machines. Our installs were fine before but for some reason we can't double click to edit text or attributes any more. I've checked MTEXTED = INTERNAL and DBLCLKEDIT = 1 but that's not it. We can type ED or ATTEDIT to edit attributes normally, or MTEDIT to edit mtext but we don't get the normal text formatting bar or ruler. It's just looks like were using the dxtext editor, but it's not dtext.
View 9 Replies
View Related
Feb 26, 2013
I wrote a couple of functions one of them creates a block with a Name let say "MyBlock".
I wrote a command "MyBlockEdit" where the selected block attribute data is displayed in a custom form to change some of the properties.
Now I want to add the folowing function:
When a block with the blockname "MyBlock" is doubleclicked the command "MyBlockEdit" is triggered in place of the attribute editor.
View 9 Replies
View Related
Jun 29, 2012
Does Inventor use the mouse double click speed settings from windows? I have set my windows double click to be quite slow but am finding I have to double click in Inventor a number of times before it works. I presumed I was clicking to slowly. Changing the setting in windows did not work?
View 1 Replies
View Related
Apr 23, 2012
In Older version could Double-click the dimension text to open it in a text editor. 2012 does not. How do I change it so it will work.
View 3 Replies
View Related
May 1, 2007
I am using 2008. In previous releases I was able to double click on a feature in the tree and edit any dimension I wanted to, including the "extrusion dim". If I wanted to just edit the extrusion, I would RMB and edit feature. Now when I DBL Click in the tree, it is the same as the RMB used to be. Now to edit any dim other than the extrusion, I have to edit sketch.
View 9 Replies
View Related
Dec 30, 2009
I currently have a bug, I can't double-click on the text box for editing text and when I click on a line I can't change propretie of the line by changing on toolbar.
Do I have to reinstall Autocad?
View 9 Replies
View Related
Apr 21, 2011
Because ~gasp~ it doesn't work the same as 2011!
What I would like to happen is have the full property menu open when I select more than one line of text and then double click. As it is, the quick properties opens (in 2011 and previous, full properties opened) . I still want the Edit Text window to open if I double click only one line. I have gone into the user interface and customized some of the items I want for double clicking, I know how to do that, but I'm not sure what change to make for the multiple item double clicking. I actually would like the full properties anytime I pick and dbl-click anything, you know, like the old days.
View 6 Replies
View Related
Mar 10, 2010
We have an older engineering in our office who is constantly double clicking his scroll wheel by accident and doing a zoom extents on his layout. He's running LT 2005. I don't see where I can change it. Its not part of the mouse button customization.
View 8 Replies
View Related
Nov 30, 2011
I have just noted that I cannot single click on entities to open properties or double click on text to launch text editor. The facility has just stopped of its own accord.
There have been no crashes or changes to my systems. No-one else uses this station or this software in my office so how can these things just go wrong by themselves?
I checked options and mouse config and nothing seems to be out of place there.
LT2010
Windows XP Professional SP3
View 2 Replies
View Related
