How to add the quick elevation edit for feature lines to the double-click actions? I have tried everything under the sun (except for the right thing) to get it to work.If the issue was resolved by this method, please click on "Accept As Solution".
View 2 RepliesI want to change the blocks and hatch double click actions, but when I open the cui customization there are no commands listed in the "double click action" option. Double clicking does in fact work properly, so there should be no reason the default cui (C3d.cuix) does not show any commands in the "double click actions" option.
View 2 Replies View RelatedWe'll I'm not sure what happen here but, I can not for the life of me figure out why the double-click stopped working
PICKFIRST = 1
DOUBLECLICKEDIT=ON
and the Noun/Verb is checked . When I look at the CIVIL CUI, I do not have any double - clicks but the ACAD CUI does - this is load too right.
I was just wondering if you can customize your interface so you can edit note labels (or any labels for that matter) by double clicking. I've already gone throught the cui files but I can't find anything. Am I missing something. c3d 2007
View 9 Replies View RelatedEvery time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies View RelatedMy friend here at work can't seem to double click on anything to edit it. If he single clicks it to say change the layer it wont change it. We have looked in our 'options' menu and everything is set up correct for double clicking. we have re started his computer but that didnt seem to work either.
View 4 Replies View RelatedMy double click edit function is not working even though...
DBLCLKEDIT is <ON>
PICKFIRST = <1>
and my noun/verb selection box is checked
Using LT 2014 on Win 7 Pro.
Recently got a new PC and due to problems with regular LT crashes I have recreated my customizations etc. from scratch.
Finally seem to have got everything working OK and how I it was on my old PC, other than one minor issue.
I have edited the CUI so that the "old" attribute editor (ATTEDIT) is launched rather than the enhanced (EATTEDIT) version.
However after double clicking a block a further third click is required to select block/launch editor.
Editing CUI back to EATTEDIT works ok with only a double click required.
My office has just installed 2012 on a couple of extra machines. Our installs were fine before but for some reason we can't double click to edit text or attributes any more. I've checked MTEXTED = INTERNAL and DBLCLKEDIT = 1 but that's not it. We can type ED or ATTEDIT to edit attributes normally, or MTEDIT to edit mtext but we don't get the normal text formatting bar or ruler. It's just looks like were using the dxtext editor, but it's not dtext.
View 9 Replies View RelatedI am using 2008. In previous releases I was able to double click on a feature in the tree and edit any dimension I wanted to, including the "extrusion dim". If I wanted to just edit the extrusion, I would RMB and edit feature. Now when I DBL Click in the tree, it is the same as the RMB used to be. Now to edit any dim other than the extrusion, I have to edit sketch.
View 9 Replies View RelatedAny way to customize the double-click of a block attribute to run the _ATTIPEDIT command on the targeted attribute? I know this can be achieved by holding Ctrl & then double clicking, but I am often using my hand else where on the keyboard, or even more often, when entering many values into attributes, I am using my left hand to keep my place on a sheet of paper as I scroll down it and enter in the values.
View 5 Replies View RelatedJust installed 2013 and have a couple of buggy problems.
1.I can't double click on dims to add / edit text. I've added / changed the cui double click settings but that does work.
2.The new array command does bring up the associated ribbon panel after the array has been created. I can get this to work while using Civils as AutoCAd, but not as Civils?
I have altered my CUI so when I double click on civil 3d objects it opens up their properties for quick editing. Never had a problem pre 2013 and I am sure this is something I did but am lost.
Every time I double click on any object it just opens up the properties box. It skips right over my double click customization.
is there an option that im missing to allow me to edit attributes in a block? i have set QAFLAGS to 0 and my pickfirst is set to 1.
View 5 Replies View RelatedIt is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedI must have changed some dam switch or something. DBLCLKEDIT is set to on and CUI is setup for some double click actions.
View 2 Replies View RelatedUsing 2012 in my CUI I could set the general note label to use the double click function. When I double clicked on any label I'd get the editor box pop up. Now in 2013 for some strange reason that no longer seems to work.
View 9 Replies View RelatedI have a surface profile 1 and a corresponding water level profile 1 of a flood plain. Now I get an updated surface profile 2 and the engineer ask me to ajust the water level according to the difference of surface level 1 and 2.
How can I add a irregular distance (water depth) to surface profile 1?
I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies View RelatedI have a grading that, going left to right has a a region of relative elevation, a transition followed by another region of relation elevation.
I need to change criterior of the transition region to another relative elevation with the appropriate transition on either side.
I deleted the original transition grading (with the menu commands) and tried adding the 3rd relative elevation but keep getting prompted for a transition length instead of the relative elevation (I am choosing relative elevation criterior). It seems the feature line doesn't want to let go of the original definition. I should be able to replace that original transition with a new criterior, No?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
Is there a way to add a column that would show for each elevation range the percentage of the total area?
View 1 Replies View RelatedI was editing a profile yesterday and when I chose the grips, it offered me the station or elevation which I could edit. C3d crashed and now after 3 restarts, I cannot get the SE grips. I only get polar tracking when using grip edits.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Illustrator CS4
I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more.
I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedI have everything working on my double elevation bubble dynamic block except for one thing.
The bubble to the right has the parameters, and the one on the left only has annotative info in it.
I have rotate, stretch, flip, but when I rotate the bubble the annotative text in the left bubble stays where it is.
I've just upgraded to ACAD 2012 from 2009 and have copied over my CUI settings and getting different results when Double clicking on regular ( not Dynamic ) blocks. The macro for this i've set to ^C^C_refedit.
This previously would automatically select the NESTED block in the list of reference names if double clicked on in the drawing, however now in 2012 the parent block is always selected and i need to hunt through the list to find the actual nested block that im wanting to edit.
Is there a setting / variable that has changed in the upgrades? I have Automatically select all nested objects selected in the Reference edit dialog box and all other options match my 2009 as far as i can tell.
Arcticad gave me code to work out the right keywords to search for. The only google hit was a chinese website.I added it to his/her code but didn't delete any of the existing handlers just in case.
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.ApplicationServicesImports AcApp = Autodesk.AutoCAD.ApplicationServices.ApplicationImports Autodesk.AutoCAD.EditorInput<Assembly: ExtensionApplication(GetType(VbExtApp))> Public Class VbExtApp Implements Autodesk.AutoCAD.Runtime.IExtensionApplication Private DocMan As DocumentCollection 'Initialize sub.
[code]....
The pre-loaded double click options in the CUI were getting really annoying, so I deleted all the double click attributes (while in the CUI tree) to have a clean slate to work with, but now I can't figure out how to add DDATTE to work on a double click.
I followed the Help guide and got all the way until it told me to "drag the command you want to add the double click action in the Customizations In <file name> pane", but I cannot find the DDATTE command in the Command List.
Trying to change the Hatch double click command from quick properties to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
My mouse has a nasty habit of accidentally double clicking when I don't want it to and the VPMax command is really infuriating me. Is there a way to disable the double click to VPMax?
View 1 Replies View RelatedWhen I go into CUI & try to customize the double click for say line & set it to bring up the properties box it works, but it changes all double click actions to do that unless there is already a default double click for a particular command. When I set the double click in the hatch command to edit the hatch (hatch box pops up) it works but it will change the line double click to do the same thing. I don't remember having this problem in 2009. I'm saving in the CUI every time I try this.
View 6 Replies View Related