I will be using the stripping pavement subassembly. I would like to strip 1.0' but in a Deeper fill I only need to strip 5' below finish grade. Is it possible to limit stripping. I can't find a way
View 1 RepliesI've recently started working with Civil2012/2013 (bit the bullet you might say).
I attended a course on civil about a year ago but it didn't cover all the bases.
My question: stripping calculation, is there a way fro civil to perform it automatically?
One way to calculate stripping (manually) is after i have all the tin volume surfaces, is to show the fill areas in the volume tables and then do the calculation myself.
Calculating stripping using a corridor.
All we have is an alignment and a surface. In one region we need to calculate the stripping that is 6m wide x 1m deep.
I used LinkOffsetOnSurface to get the surface elevation on the left and right side.
I then tried using the stripping subassemblies but no luck.
because we have a number of regions and assemblies we would rather use corridors than creating a stripping surface.
How can I create a top soil stripping line in an assembly?
View 6 Replies View RelatedI am trying to apply the stripping pavement subassembly to only fill situation and even though my attachment point is only the fill case it applies it to both as shown. I am trying to get this information to provide a stripping volume for fill cases only.
View 4 Replies View RelatedI have a user who crashed and all the layers were renamed with the prefix to:
9669-pbase|
He needs to strip out all the "9669-pbase|" prefixes in 1,000 layers. Is there a way to do this?
I seriously apologize if I'm missing something obvious. There has been some hoopla here & there on the www re: CS4's improved handling of metadata when Saving for Web/Devices, particularly preserving EXIF data.
View 8 Replies View RelatedEverytime I "save for web" my EXIF data is stripped when using CS3.
I have been told to "save as", instead, but that function doesn't allow me to "save as" jpg's. I assume I must be doing something wrong or have an incorrect preference set.
If I am unable to save my EXIF in jpg's using CS3, can I do so, if I upgrade to CS4?
For anyone that has worked with Photoshop, Paintshop of Fireworks. I have some pictures. I want to strip out the person from the picture and it's background. and pasted it to a plain white background.
The pictures were taken using a digital camera. Example: I have a person standing against a gray wall, I want to strip the person out, and paste it to a plain white background. Does anyone know who to do this without to much of a hassle?
I have received an image from someone which has text all over it. I'd like to strip out a little of the text at the bottom of the image. The background is kind of a grainy, paper-looking beige texture. And, in a perfect world, I'd be able to select only text and delete it.
View 1 Replies View RelatedI have a server running Windows 2003 and I need to have limited users be able to run Autocad LT 2012. Every time it runs, Windows Installer pops up for a very short time and AutoCAD never actually runs. I believe that the pop up is for the English Language Pack, but I cannot be positive about it. I have already read the KB article on running as a restricted user, URL.... and the environment does not prevent the user from accessing any of the registry and file locations specified. I have tried many things to get this to work, but nothing seems to do it. One notable thing that I tried was to make the user an admin, run the program, then remove them from the admins group, but as soon as I remove them, they are no longer able to run it.
View 3 Replies View RelatedI am using Paint Shop Pro V7.04. When I save a file as a JPG, it strips EXIF info and the tags describing the camera settings for the image. Is there any way of preventing this on this version of PSP?
View 1 Replies View RelatedI have general question about DWF or DWFx file. Is there a limit number of files or how many MB can viewer open and work without crashing.
I have very well built PC but I have hard time to view DWF file without crashing.
PC spec
Xeon X5690 (3.47 GHz) 2 processor on board
48 GB of ram
SSD drive
Win 7 64 bit
Quadro FX4800 with driver recomend by Autodesk.
I have DWF file around 30,000 parts and the file size 18 to 25 MB.
I can open with 2013 DWF viewer but soon I turn the model it crash.
I change the setting in DWF viewer to Open GL or Software Open GL and it work but the graphic is not friendly rotating it missing a lot of detail.
My customer demand to use the DWF file to review the design and I don't know how to support them.
I try 3D PDF it is bad too.
We have assembly up to 160,000 parts .
Inventor Pro, Inventor Publisher & Vault 2012
Intel(R) Xeon(R) CPU X5690 @3.47GHz (2 processors)
Mem 48.0 GB
OS Win 7 64-bit
Graphic Card: Quadro FX 4800
"You don't need export below 1 mpx because 512 mpix is enough for all".Are nobody need export files lesser than 1 mpix for web and previews?
View 9 Replies View RelatedI find only limited image import options under Photoshop CS5 and CS6. Under CS3, I have a number of options which I have used frequently, regarding preview, zoom, descreening, filtering, stretch, noise removal, fading, grain, etc.
None of these seem to be available under either CS5 OR CS6. In fact, under CS5, under "FILE>IMPORT", I I don't even GET the Canoscan 8400F opton. This is pretty basic stuff, getting good quality off a scanner. Do I need to go back to CS3 for everything? It actually worked.
CS6
Win7 Pro
Why might the Marquee Tool be stuck on rectangular? I can't access Elliptical or the other types.
I was trying to send a bunch of images by e-mail for my wife this morning. They were images of her jewelery she was sending to galleries.
All but 2 of them I sent as .jpg files (to keep the size lower) but 2 of them were .tif files to start with, and when I opened them in Photoshop CS2 and sized them, it wouldn't let me save them as .jpg files, in fact the save options were limited to a few formats like ,png etc.
I looked for a reason but I didn't see anything different about these files.
They were in 16 bit RGB color mode.
I saved them as .psd files and then reopened them and tried again but the formats were still limited.
The rest of the images gave me the full span of save formats.
I'm not able to work on big images with X4.Maximum size is 10000 pixels.On X2, it was 32767 pixels.[URL]
View 7 Replies View RelatedI have recently update my Corel VS from X3 to X5. As in X3 with Movie Factorey 7SE there only seems to be very limited DVD or Blu ray menu templates. I only have about eight possible fairly basic looking menus in either the MF7SE or X5 version of software.
Some SV tutorials I have been watching lately seem to have quite a good selection of menu templates, particularly those with thumbnails, via the drop selection menu allowing very shmic professional looking menus in VS X5. As my primary reason for upgrading was to improve the quality of the disc creation process and menus, how / where I can get additional disk menu templates for creating Blu Rays and any tutorials for menu creation techniques.
Hoping someone can help me out with this - it's been one of those gaps in my knowledge that I've never really gotten around to filling. I've looked around the net a number of times, but it's also one of those things that I don't really know what to search for. I'm guessing it would come under some kind of duotone or limited palette affair.
So much so, that I can't even find an example image to show you what I'm talking about
Everyone has seen what I'm talking about I'm sure. If you imagine a nice, sharp, black and white photo - then imagine superimposing a colour on top. So you have the same nice sharp contours and tones - except you now have black, colour shades and white - instead of grey shades.
I have a problem with Photoshop CS, working in a limited account.
Namely, in admin account PS has in 'Save As' File Types list, among others JPEG file type.
But in limited account there is no JPEG file type in the 'Save As' list, so i have to go to 'Save for Web' to compress psd file.
I presume that's something about ntfs permissions, so i assigned full control to COMP/Users for Photoshop folders in 'Program Files' and 'Common Files', but to no avail.
Is there some Windows compressor, to which PS is addressing to compress files, and if so, where it could be located? If i knew that, i could assign user permissions to it.
display an image for limited milliseconds?
View 3 Replies View RelatedI'm trying to design an album in Lightroom for the first time, and am looking for very clean layouts with lots of white space for wedding albums. I found a template with two vertical images that I liked a lot, but all the options available have some sort of funky black outline around them! I can't believe they didn't just include one of the same without an outline. They really need to have the ability to develop your own templates!!
View 6 Replies View RelatedI'm using Windows Vista and my client is using a new Mac. We are both using Lr 4 along with Photoshop CS6 and Photoshop Elements 11.
When we export images to CS and PSE copies are created in the Lr filmstrip as expected and CS6 and PSE open as they should. Unfortunately, the images do not open in these programs as they should. We have to manually retreave them from the folder. What would be preventing the images from opening. It happens when we choose Export and Edit In...., but does not happen on my daughters computer which is operating with Windows 7.
i´m stuck with calibrating my Dell U2711(wide gamut) on Windows7, CS6 i used it with the integrated Adobe RGB preset and a standard profile. After calibration with i1displayPro (monitor in custom preset, slight changes to reach D65 whitepoint) i got a solid ICC2 profile which seems to fill the Adobe RGB space quite well (compared them in 3D).
The point where i can't get any further is the color rendering in PS and ACR, the colors are limited to a sRGB like saturation level. I´ve set my Creative Suite Color settings to aRGB, disabled Softproofing in PS.Here is what red (255,0,0) looks like: left: proofing OFF
middle: sRGB proof
right: monitor proof
I've been using GIMP for a while for basic website stuff. Very basic website stuff. I've recently been asked if GIMP has some more advanced features. Well, advanced put to my usual level of use anyway.
So, I thought I'd query if I could do the following in GIMP...
(1) Edit a BMP but ensure the file size remains the same?
The person asking is using the images for a specific purpose and they always have to be the same size.
(2) Open .pspimages and possibly save back as this format.
The answer to this seems to be no on the opening front anyway.
(3) Restrict the image to a very limited range of colours, say 3-6?
Again this is due to the very specific and restricted nature of the images they are creating.
I truly love to work with lighroom. However, I hope that in the next adbobe update , that a more advanced but fundamental search/sort feature is added to the library mode.
Specifically - in Library mode --under folders -- there is no way to sort the folders other than alphabetically. Why not -- like most, even primitive photo editing software, can one not sort by date, time taken, place etcetc ... at least by date!!
how do I change the format of my workspace it is limited to vertical only?
View 5 Replies View RelatedWhy is there a 600% limit to Motion Scale? Why can't I zoom into a video to 2000% if I wanted? (I have to export to after effects).
View 5 Replies View RelatedI have a few websites with a middle and dark grey. I'm looking for a really super light grey. I clicked on foreground, only web colors — and the 204, 204, 204 setting is nice. I then manually entered 240, 240, 240, same exact grey.
Is that right?
and is there a lighter grey. The picker was very limited in options.
I'm using the trial version of X5 and have noticed that the number of characters that display the file name at the top has been shortened since X3. In some cases I'm not able to even see any of my file name because I have things saved in many subfolders for organizational purposes. It appears that it is limited to about 120 characters, which sounds like a lot, but when using dropbox and other subfolders, can fill up quickly. When I open the same exact file in X3, the name is fully displayed. How to change this? Or is this possibly just a trial version thing? .
View 1 Replies View Related