AutoCAD Civil 3D :: Can't Adjust Manholes In Profile View
Feb 1, 2011I ain't able to adjust the manholes in profile view.
What this might be? See picture.
ADVERTISEMENT
AutoCAD Civil 3D :: How To Prevent Manholes Overlapping In The Profile
Jan 31, 2012I work for a local government and we contract out most of our CAD work. Our consultants switched to Civil 3D and it apparently cannot adhere to our standards for the profile views. We currently have manholes that would overlap in the profile view drawn "offset" and labeled as such. This allows for a much cleaner view when we get into intersections. Since the switch to Civil 3d they are drawn over top of each other with just the centerline offset at the top of the profile grid. So, my question is - is this true? Is there any way to work around this and still maintain the pipe network (footages, connectivitly, etc)?
View 7 Replies View RelatedAutoCAD Civil 3D :: Moving Profile View Labels With The Profile View?
Jul 20, 2012I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View
Nov 4, 2013I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedAutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command
Feb 28, 2011I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile
Nov 22, 2013I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update
Jul 24, 2012I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View
Nov 28, 2012Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
AutoCAD Civil 3D :: Edit Profile Without Having It On Profile View?
Jul 31, 2013A tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
AutoCAD Civil 3D :: Shifted Profile Within Profile View?
Jan 22, 2013I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport. The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into. But when I switch from model space to paper space in my layout sheet (the file the profile dwg is referenced into) the profile moves to the wrong station within my profile view in paper space.
The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.
The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.
AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View?
Jul 24, 2012I am a C3D newbie who used ground survey points (Serrano_EG_surface) that generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then into individual CL alignments. The first alignment ,which has its left and right offsets do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.
1. Are the ground survey points good enough so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a preliminary drawing for environmental permitting. ?
2. When I check the object browser, the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.
3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).
4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.
AutoCAD Civil 3D :: Adjust Elevation Of 6-inch Sewer Pipe In Profile
Oct 11, 2013I think that our file has been corrupted. We tried to adjust the elevation of a 6-inch sewer pipe in the profile and then the display of the pipe went up to a 12-inch, even though the pipe properties still show it as a 6. All the other pipe sizes seem to be working, though we did have a similar problem with 4-inch pipe the day before and fixed it with an audit. Audit does not fix this problem. It seems to apply to all six inch pipes.
The file was created in Civil 3D 2007. We are now using C3D 2012 with SP1. My machine is 64-bit but the other person working in the file has 32-bit.
I have attached the file and the pipe in question is in the sewer network and is named SP B 11.
Is there any hope for this file? Of course this is right as we are trying to meet a deadline.
PS I tried to add the file but was size restricted, then I trimmed the file down to under 1.5 MB and was still size restricted.
AutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?
Dec 20, 2012I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View
Nov 28, 20121. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
AutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View
Jan 18, 2013I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View RelatedAutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View
May 29, 2013Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies View RelatedAutoCAD Civil 3D :: Copy Couple Of Manholes From One City Map To Another One
Jan 15, 2013i am trying to copy couple of manholes from one city map to another one. But, for some reason when i go to clipboard, and click on Copy with base point. Go on to the 2nd file and click paste. It doesn't work!
View 9 Replies View RelatedAutoCAD Civil 3D :: Adjust Precision Of View Frame Start And End Station?
Mar 8, 2012How and where can I adjust the station precision of the view frame start and end station. I am choosing snap to nearest foot station but I am getting 1+00.00. I would like 1+00 in the label. I am setting to start end to the layout name and mapping that to the current drawing field in SSM and do not have precision control there either.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Civil 3D :: Pipe Network Move Multiple Manholes To New Surface?
Apr 19, 2013Just as the topic says. I have about 40 manholes referenced to a surface that has no changed and I need to update them. I can go thru one by one and pick "structure properties" and change the surface. I did change the surface under the network options, but they all still reference the old surface.
View 4 Replies View RelatedAutoCAD Civil 3D :: Profile View Of Alignment In Civil D & Google Earth Varies
Dec 25, 2012I imported Google earth surface (at eye alt 600m) to civil 3d 2012 and created an alignment of length 181m.
When I exported same alignment to Google earth , it showed the length as 190m ( the difference increases with increase in length of alignment) And also the profile view of the alignment in the Civil D & Google earth varies.
AutoCAD Civil 3D :: Profile View PI'S
May 24, 2012C3D 2012..Have a profile I'd like to have the PC, PT shown. (No Problem)But in doing so it also puts the PI'S of each of these curves in the profile view.
Is there a way to turn off the PI's and leave the PC's and PT's on?
AutoCAD Civil 3D :: Set Profile View Stations?
Nov 6, 2012I am using the profile sample VB.net program to create an alignment, profile view and profile. The profile view defaults to start at station -0+25. I want to set the Profile View starting station based on the "Align_strt_sta" value I have defined based on the Alignment Stationing. I have tried the .StationStart() shown below, but I just get a unhandled exception.
' Create the profile view and add it to the alignment's ' collection of profile views. If oProfileView Is Nothing Then id = ProfileView.Create(m_CivilDoc, Prof_View_Name, PROFILEVIEW_BANDSET_STYLE_NAME, Align_Name, pviewposition) oProfileView = pviewTransaction.GetObject(id, OpenMode.ForWrite) End If 'oProfileView.StationStart() = Align_Strt_Sta oProfileView.Description = "Profile view of alignment '" & m_SampleAlignment.Name & "'" oProfileView.StyleName = PROFILE_VIEW_STYLE_NAME
AutoCAD Civil 3D :: Hatching In Profile View
Nov 12, 2013I discovered a weird thing that seems like a bug...I tried to hatch manually while in profile view (couldn't figure out how to do what I want with the profile view hatching options) and it seems that if I try to make one hatch (by picking internal points) that includes multiple structure profiles on the same profile view, the first structure profile for that profile view works as a hatch boundary, but subsequent structure profiles are basically ignored if I keep trying to pick internal points to make a composite hatch.
I assume it's because of this same bug that I can't create a hatch by choosing boundary objects and using two structure profiles in the same profile view as boundary objects.
how to hatch using the profile view hatching and to use a pipe network as a boundary, that would also be useful.
if I hatch by picking internal points, and pick one area with a structure profile as part of the boundary, and then I pick a similar area in a different profile view, everything works fine...it's just the second (and though I don't have more than 2 structures per profile view in my drawing, I would assume any subsequent) structure profiles that I try to use as hatch boundaries that AutoCAD is basically ignoring.
AutoCAD Civil 3D :: Profile View Watermain
Aug 13, 2013When inserting a piece of my watermain into my profile view, the watermain is not stopping at the edge of the first profile view. Instead it just continues out of the view. See attachment. When I change the style of the pipe to just centre line I do not have this issue. It seems the hatching is the issue.
View 1 Replies View RelatedAutoCAD Civil 3D :: Measurements On Profile View?
May 7, 2013I want to have the ability of take measures on my profile view.
The tool would consider the vertical exaggeration and give me the right distance and slope .
Civil 3D (2013)
AutoCAD Civil 3D :: Profile View / Band
May 22, 2013How to upload Civil 3d Sample profile with full band
View 1 Replies View RelatedAutoCAD Civil 3D :: Pipes In Profile View?
Apr 5, 2013Is there a way (and I'm just missing it) to have a pipe from a pipe network only be shown 'cut-off', with the typical 'cut-off' shown on the profile view? see the screen shot of sketch of what I'm referring to.
View 2 Replies View RelatedAutoCAD Civil 3D :: Structure In Profile View
May 5, 2013how can i set the smub of a structure at the crown of a pipe not at the invert?
View 3 Replies View RelatedAutoCAD Civil 3D :: Profile View Bands
Jan 11, 2014I'm having difficulty adding bands to a profile view in Civil 3D 2013 in that the bands appear to be come corrupt in not showing the data (the check box to show is unselected, even if I set it to show) and when I go into the UI and turn the bands to show the bands don't show the information correctly.
Alignment align = profileView.AlignmentId.GetObject(OpenMode.ForRead) as Alignment;
Profile prof = profObjId.GetObject(OpenMode.ForRead) as Profile;
if (!profileView.IsWriteEnabled) profileView.UpgradeOpen();
profileView.StyleId = profViewStyleObjId;ProfileViewBandItemCollection bottomBandItems =
[Code] ..........
AutoCAD Civil 3D :: Profile View - Bands
Oct 21, 2013I've been trying to set up a profile view to look like the Section i've attached (Done Manually) but having great difficulty with the bands.
Any detailed long-sections of a pipe network done with C3D that i could work off.
AutoCAD Civil 3D :: Add Gap In Split Profile View
Sep 18, 2012If I have a profile view that I split in the middle, how can I add a gap between the two sections?
View 2 Replies View Related