AutoCAD 2010 :: Stacked Fraction In 2011- How To Set Default To Stack Diagonally
Feb 15, 2012
How to set default to stack diagonally? It used to work automatically, but somehow it turn off so that every fraction I write needs to be highlighted and then converted by pressing the a/b button.
How do I set it so that when I type fractions in a text box it automatically keeps them as non-stacked fractions rather than horizontally or diagonally stacked?
System variable to keep a stacked fraction with the leading number?
We open the same drawing on different computers at work and on one computer the number will be 21/2 but on the next computer that opens the same dwg the 1/2 will have been bumped down to the the following line. I don't know if this is a problem with the autostack properties, although I can't find anything about that, or if its a problem with the tabs.
I'm completely at a loss and its becoming a problem because if one person opens a project to plot it and it looks fine but the next person opens it and every mtext in the dwg is wrong it becomes very time consuming to fix.
A long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
On our older 2007 version, we used the command %%140 (and so on) to make the stacked fraction 9/16 in our string of text. Now with version 2010, all of the fractions (where this command was used) display as a question mark. This is a major issue since now all of our isometric drawings are displaying this in regards to text.
When using RomanS, how do you stack fractions in single line text? AutoCad will do it automatically in multiline text but I am having trouble in single line text.
Our company just upgraded to AutoCad 2011. We get files from our clients that exports their files from revit. It seems that Autocad 2011 slows down when reading this files (cursor will have a second or two delay).
My brushes an sculpting tools arnt doing wht they're supposed to. My sculpting tool is taking from the mesh and my bumpmap is doing the same, even whn i press ctrl my bumpmap dsnt raise as much and ive checked my brush strength. how to reset my settings
I'm using the UFRaw plugin to GIMP for importing RAW images. However, if I do any adjustments for a particular image, UFRaw will save that as default when I import the image to GIMP.
I downloaded the installer for AutoCAD 2012 and when I went to install it, it told me I can't because there are already AutoCAD applications on my mac. So I ran the uninstaller for 2011, and it's still giving me the same message.
I recently just installed Autocad 2012, using a student licence obtained from the autodesk website. I entered my serial number and product key, and it said that it was suceesfully installed. It even launched, however now when I launch Autocad 2012 the start up screen appears, it says its initialzing, it loads then nothing appears on my screen or even my taskbar, I'm running Windows 7 professional 32 bit.
Never had this issue when running past versions of Autocad but every time i try and hatch using 'pick internal points' the program crashes. "FATAL ERROR - Out of memory - shutting down" message comes up every time. Hatching by selecting an object works fine but most of time this option is unusable.
2.66ghz 3.25gb ram windows xp 32 bit NVIDIA Quadro FX 570
i have atocad 2011 installed on my computer (64 bit), a HP Pavilion p6370nl desktop pc, and also have a new videocart: nvidea gt 640, but if start atocad, it starts, and close then. what to do? i already have reinstalled it and also repaired it so...
Our structural firm is using 2011, and our office has received drawings that came out of 2014 twice in the past week (from separate arch clients). In both instances, we back-converted using DWG TrueView 2014, but upon opening in ACAD, none of the walls were showing up (although they do appear in the preview). One of my other drafters dealt with it the first time, and got it resolved, although I didn't get specifics on how. Naturally, the second time it happened, she was out, so I am seeing if the architect can back-save to 2010 on their end and send the file.
While waiting on that, I tried QSelect in the offending file, and in the list of items that comes up, there was, amid the usual Text, Line, Pline, Block, etc., something called ACAD_PROXY_ENTITY. I selected all (nothing was visible, however--usually you see grips at least when you QSelect things), then exploded, and the walls showed up.
I have had somewhat similar odd behavior from drawings coming from I think ADT (do they still make ADT?), where things like walls, doors and windows come in as something block-like (I think AEC OBJECTS?), and we have to explode them in order to control color and visibility of their constituent parts. Perhaps this is something similar?
At any rate, this seems like something that either shouldn't be happening, or that has a more obvious fix than having to qselect and explode invisible things to get them to show up.
We are using AutoCAD 2011 and AutoCAD 2012 on the same drawings. It is slowing the drawings down in AutoCAD 2011. There is at least one person that only has AutoCAD 2012 on their machine.
One of the computers that have AutoCad installed will not load all the way. It will start to show the welcome screen and the it will freeze. Looking on the internet that you go into task manager and kill the process called WSCommCntr, but it is not appearing in the task manager.
Originally the pc was on XP SP2 and with .Net 3.5. I updated both to the latest version. I have reinstalled AutoCad and I am still getting the issue. All hardware checks passed.
Also the issue sounds just like the one here URL.... , but I uninstalled the .Net Framework and reinstalled version 3.5 SP1. That did not work so I uninstalled that and put on 3.5. This still is not working.
Are multileaders in 2011 not associative? I had to move a group of equipment off of a bulkhead to allow for insulation I did not know was there and when I went back to my layout, I had to reattach every arrowhead to its respective piece of equipment.
Is there a way to make the cross hairs default to the inverse of the color under them (e.g. black when over white, blue when over yellow, cyan when over red, etc.)? I remember that it did this in previous versions, but I can't find a setting for it in 2011.
i am using Window Vista, and i'm using my AutoCad 2011 for almost a year and a half now but this past week i cannot open it any any more for some errors;
Problem signature: Problem Event Name: AppHangB1 Application Name: acad.exe Application Version: 24.1.208.0 Application Timestamp: 4dbf99e8 Hang Signature: b33a Hang Type: 0 OS Version: 6.0.6002.2.2.0.768.2
I created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.