AutoCAD 2010 :: Error Aborting - Won't Adapt New Plotters
Jan 7, 2013
I reinstalled AutoCad 2010. Registration went fine, but I'm very limited inside AutoCad 2010. I can not print anything. It won't adapt new plotters. I can't export or publish a drawing in PDF, nor can I access options to make any changes whatsoever.
The text box that appears now is Fatal Error: unhandled access violation reading 0x0000exceptionat9842eeh. I am unable to go through that route because of Federal Government security settings.
View 1 Replies
ADVERTISEMENT
Dec 31, 2012
I am calibrating a new plotter in the office. I often work with color aerial imagery. How do plotters interpret the colors in an image? Does it work pixel by pixel, and if so, does it use an RGB, HSV, CMWK, hexidecimal value? Does the plotter MACHINE just "scan" the image is one "object" or does it work in batches, or "tiles"? I don't want to alter the image in Photoshop just yet, but I am curious as how the plotter MACHINE is determining the color and how bright, vivid, dull, the IMAGE is plotting at?
The other issue is that the newer plotter plots in more vivid colors than our older machines, but the difference between the 255 AutoCAD colors is less pronounced. I am concerned that adjusting the individual RGB values for each of the 255 colors won't make any difference if the NEW plotter is factory-calibrated to produce vivid colors with little difference between brightness, contrast, etc.
On a side note, I do oil painting as a hobby and I run into tinting strengths, brightness, luminosity all the time when mixing various oils, pigments, and binders
View 1 Replies
View Related
Jul 22, 2013
I get a AutoCAD LT Error Aborting window with the contents FATAL ERROR: Unhandled Access Violation Reading 0x0034 Exception at 265d985fh when I attempt to plot using a custom created border that is imported into paper space using a .dwt file for a new drawing.
The error occurs with both 2013 LT and a fresh install of 2014 LT and is limited to one computer / user with another computer / user with the same software not having the issue using the same .dwt file.
The error occurs when plotting to any plotter including the DWG to PDF plot selection.
View 3 Replies
View Related
Jun 7, 2011
ACA 2011 Win 7 - 64
How do I purge or delete the printers/plotters from the list in the plot set up dialog. I have several that go to the same machine but are not config'd correctly or just simply not used. Can I get rid of them so I don't have to sort through when plotting?
Also, what about the list of sheet set ups in the plot dialog?
View 5 Replies
View Related
May 28, 2013
I've been working with adaptive parts for a while now so I think I have a pretty good handle on how they work, but I've tried every trick I know and can't get this adaptive part to adapt correctly. When I apply the final constraint, which should drive its length, Inventor tells me it's an inconsistent constraint. If the part would adapt, it should be perfectly consistent. I've attached my work-set, the constraint I'm trying to apply is "Flush:17" under "Side Guard Plate" (the last component in the browser tree).
View 9 Replies
View Related
May 16, 2002
I am having problems setting up one computers plot configuration to a networked plotter in the work station. With the other computers we were able to just add the plotter of choice and it would show up in the config. This one, however doesn't seem to work. We can print test pages to it and plot with other programs. Only AutoCAD doesn't see it. We've gone into plot options to see if the settings were any different from one computer to the next and they are all the same.
View 1 Replies
View Related
Jun 14, 2012
We just upgraded our old DJ4000 to a T2300 and are having a devil of a time getting the PC3 files to work. We have about 40 CAD users and the PC3s are all on a shared network location.
[URL]
We tried using the 5500 and 4020 drivers but they did not work for us.
It looks like we are now faced with deploying 30+ PC3s to 40+ computers. What a HUGE pain in the you-know-what that will be. All of the PMP will have to be repathed.
What was HP thinking? That the T2300 -- or, if the above-referenced thread is accurate, ANY of their plotters -- are not suitable for use in companies that have more than one or two users?
View 2 Replies
View Related
Jul 28, 2012
Recently purchased Corel X5. I really like the editor and find it intuitive, fast, and stable, but the program that creates DVDs is giving me fits with a long list of issues. One of the main issue I have is that when I go to preview a DVD, more than half of the time the program immediately aborts and kicks me entirely out of Corel. I end up having to re-start Corel, go back into the DVD creation portion, and try again. Eventually, the preview works. If I don't close the DVD program and then save the project in the editor before running the preview and it aborts, I lose my changes, so I have to constantly go back to the editor and save my project when working on a DVD menu.
View 2 Replies
View Related
Oct 22, 2013
I've found a .lsp that does nearly what I require. The lisp that I've got allows you to identify a block, and have another block replace it.
Is it possible to adapt this lisp to allow you to select multiple target blocks to be overwritten?
(defun c:rblk (/ pre nb ss i en ed) (while (or (not pre) (not (snvalid pre)))
(setq pre (getstring "Existing BLOCKs Name Prefix: "))) (while (not nb) (setq nb (getstring "
New BLOCK Name: "))
[Code] .....
In this particular instance, I'm trying to have multiple different door symbols in a 2D plan overwritten with a uniform marker.
View 8 Replies
View Related
Feb 7, 2013
I'm attempting to print from LR4 print module to a Canon Pixma Pro 9500 using a mac platform. I have 25 contact sheets to print (don't ask!!) and it's taken me 2 days so far and I have managed to print 18 of them. The printer is working. Lightroom appears to be working.
View 1 Replies
View Related
Jul 3, 2013
i am currently working on the storyboard for a title sequence, and i have to animate it now.
As you can see in the picture i have a light blue background that has a circular shaped mask, and everything happens inside this mask in multiple layers on the back.
my problem is i want this mask to be animated, and to have a watercolor felling. so i thought of using video footage of ink, you know the typical video of ink falling into water and sort of expanding.
i have no problem making the video appear inside the ink stain, but my question is: is there a way to make a video follow the shape of an object? so i can make this ink footage adapt to different mask forms, for example a circle or a triangle, or even more complicated forms like, i dont know a human silhouette?
i am thinking something that stretches the video along a path with the shape of the object may be the solution.
View 5 Replies
View Related
Jun 5, 2013
I did put a real photo in the background of my website to fit entire page. So the text of my webpage is black, and sometimes other colors. So what happen is that some times the text is hard to read when it come on top of dark places of the photo (for example hear of people). So i want to adapt the photo to make it more unicolor, more whiten (increase whiteness) so the black text will appear even better.
What tools and filters in gimp that give me this ability to do that ?
View 2 Replies
View Related
Dec 15, 2012
we are using autocad 2010 and we are getting LOW MEMORY ERROR AND FATAL ERROR in Autocad
System Configuration is
i5 processor,
6gb ram
xp 32 bit
We are only one file only in that also we are getting error.
View 8 Replies
View Related
Apr 17, 2012
Having a problem with AutoCAD 2012. When trying to plot the dwg, suddenly this message come up. Even after install Service Pack 1, it still doesn't solve the problem. Attach is the image for your reference.
I've tried to search for the solution but cannot find any with StackHash_f960.
View 9 Replies
View Related
Feb 7, 2013
Using (plain vanilla) AutoCAD 2012 I've been getting a funny error: After working normally and without problem for some period, suddenly every time I open a drawing I get an error message that says "AEC dimension: opening / door / window associativity initiation failed". The error appears each time I open another drawing until I shut AutoCAD down and restart it.
View 4 Replies
View Related
Mar 26, 2012
Is there a setting somewhere that keeps the Mtext Editor in the same place? I believe in previous versions if you specified "OldEditor" it would keep the editing box at the same size and same location that you specified. In ACAD 2012, if I change to "Old Editor" I get an error message - see attached.
I have tried MTEXTfixed at 0 or 1 with no luck. I do understand that you can zoom in and out to change the size of the text when editing.I run dual monitors and like to have the mtext editing on the screen without my drawing.
View 1 Replies
View Related
Mar 7, 2012
I'm trying to render a large drawing and I keep getting this error message:
"The Scene Cannot Be Rendered. The Scene Must Contain At Least One 3D Wireframe or Solid Model Object To Render"
Other, similar drawings do not get this error message and i cant figure out what is causing it.
View 3 Replies
View Related
Aug 25, 2012
When trying to run this code is throws a Cannot create ActiveX object
If ac IsNothingThen
ac = CreateObject("AutoCAD.Application")
Else
ac = GetObject(,"AutoCAD.Application")
EndIf
View 2 Replies
View Related
Sep 24, 2013
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies
View Related
Dec 9, 2013
So I got a problem with a Drawing. I got 2 layouts from the same model space, the first one can be converted just as usual but when I`m trying to plot the second one I`m getting a fatal error. I already tried to copy it into a new layout and tried different PDFcreators such as PDF24 but it`s always the same. There are no special elements or such things in the layout. Ok so I just found out that the problem is the transparency because i can plot it without but i never had that problem before, i even plotted a drawing with transparency today.
(pic of the error attached)
View 2 Replies
View Related
Jul 18, 2012
Some users are getting the following error when running Script Pro:
Error while reading log file for <drawing path>
View 4 Replies
View Related
Mar 6, 2012
Every time I try to print or preview the following error appears and no error code or log comes after.
I already instaled SP1, changed acad.ctb e use other templates.
View 2 Replies
View Related
Oct 10, 2012
I work at a place where we use autocad, everywhere... And I'm in IT and i've been struggling with this for a day now. I got 2009/2011 to work, but when i try to get 2010 to work, it just doesnt want to cooperate. Now when i used to start it up a proxy graphics thing would pop up, and i figured out how to turn that off, but then no ribbon loads.
So i go to the command line and type in ribbon, and i get an error:
"Unhandled exception has occurred in a component, in your application. if you continue, the app will ignore this error and attempt to continue. Object reference not set to an instance of an object" and here are the details..See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.LoadRibbon()
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.Initialize()
at Autodesk.AutoCAD.Ribbon.RibbonServices.CreateRibbonPaletteSet()
at Autodesk.AutoCAD.Ribbon.Commands.Ribbon()
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorker(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorkerWithExceptionFilter(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.Invoke(MethodInfo mi, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.CommandThunk.Invoke()
[code]...
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replies
View Related
Jun 19, 2012
I am rying to modify a toolbar through the cui. When I try and drag and drop the command I want to add I get an error.
View 1 Replies
View Related
Mar 13, 2012
Just last week I was working just fine. When trying to access the product today, as usual the A5 sized "Loading" starts but when the product is to appear it just shuts off. It is not indicating what the error is through a dialog box, hence, I am not sure what the problem may be.
I have check various discussion groups which say it may arise from FLEX related files or CascadeInfo.cas but nothing changed. I have also done an entire un installation of the product and Installed it from scratch. The problem persists.
PC Specs:
Intel Core i7-720QM processor
Windows 7 Home Premium N 64-bit
16GB DDR3
1280GB HDD
View 1 Replies
View Related
Jun 14, 2012
Im getting spamed by the error called Undifined Symbol XX. I found out, that the error only appears when I copy something from a different drawing. The error doesnt appear on the original plan.
In the attachments, see screenshot of the error
View 9 Replies
View Related
Feb 8, 2012
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.
View 5 Replies
View Related
Feb 20, 2012
Opening AutoCAD LT this morning no problem. Closed it down and then opened it up again about 10 to 15mins later and get this message (see attached pdf).
Windows XP.
View 5 Replies
View Related
Sep 11, 2012
I have AutoCAD 2012.
When it launches, I get the following:
"AutoCAD requires 1024 x 768 resolution or higher to run"
I have a newer laptop (Dell Precision M6600: +/-Jan this year). The screen resolution is set at 1920 x 1080 (the recommended setting). On any other program, the screen resolution is fine, everything works.
If I try to launch AutoCAD, the screen takes on a noticeably lower resolution to the point where I can not select commands from the screen, some commands don't "fit" and are therefore missing. It took a while to figure out how to even close out of the program to go back to other versions that work.
View 1 Replies
View Related
Dec 4, 2012
I have a 3D polyline (blue in attached) for which I am trying to calculate the surface area. I use the area-->object command and get 1912342m2 in AutoCAD 2012. My colleague uses the same command in AutoCAD LT 2009 and gets 1807093m2. Due to the discrepancy, I roughly traced a polyline (yellow in attached) around the area in AutoCAD 2012 and I get approx. 1810000m2 so assumedly the AutoCAD LT 2009 version is giving the correct answer while my AutoCAD 2012 is not!
Why am I getting a different area for the polylines...is the difference is due to it being a 3D polyline? Is there a way I can ensure I obtain the correct area using the 3D polyline?
View 1 Replies
View Related
Mar 3, 2013
i am using Window Vista, and i'm using my AutoCad 2011 for almost a year and a half now but this past week i cannot open it any any more for some errors;
Problem signature:
Problem Event Name: AppHangB1
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf99e8
Hang Signature: b33a
Hang Type: 0
OS Version: 6.0.6002.2.2.0.768.2
[code]....
View 1 Replies
View Related