AutoCAD LT :: Error Aborting When Plotting
Jul 22, 2013
I get a AutoCAD LT Error Aborting window with the contents FATAL ERROR: Unhandled Access Violation Reading 0x0034 Exception at 265d985fh when I attempt to plot using a custom created border that is imported into paper space using a .dwt file for a new drawing.
The error occurs with both 2013 LT and a fresh install of 2014 LT and is limited to one computer / user with another computer / user with the same software not having the issue using the same .dwt file.
The error occurs when plotting to any plotter including the DWG to PDF plot selection.
View 3 Replies
ADVERTISEMENT
Jan 7, 2013
I reinstalled AutoCad 2010. Registration went fine, but I'm very limited inside AutoCad 2010. I can not print anything. It won't adapt new plotters. I can't export or publish a drawing in PDF, nor can I access options to make any changes whatsoever.
The text box that appears now is Fatal Error: unhandled access violation reading 0x0000exceptionat9842eeh. I am unable to go through that route because of Federal Government security settings.
View 1 Replies
View Related
Feb 2, 2012
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
View 7 Replies
View Related
Oct 4, 2013
When I go to plot to pdf in cad (using pdf complete) everything seems fine (preview, settings etc). Then when I click print no box pops up with the option to save the file in a location with the result that there is no resulting pdf file?!
I have looked on the web and asked around the office and no one seems to be able to figure this one out. I have also tried the command FILEDIA with no success. The computer has no problem printing to a printer and this problem seems only to exist using pdf complete.
View 5 Replies
View Related
Nov 19, 2013
I am using AutoCad 2000 on Windows XP - and have had no problems for years. today - I went to print out a drawing, and when clicking on plot - or plot preview, it gave me: Fatal Error: Unhandled Access Violation Reading 0x0000 Exception at 5e2c36h. I thought it was just this one file, but none of the existing drawings I open will print. And they have always printed.
View 9 Replies
View Related
Mar 11, 2013
When Civil 3D 2013 came out I downloaded it and installed it. I imediately discovered that when selecting my window during plotting by window, if I zoomed or panned I would not be able to pick any points and would have to hit escape SEVERAL times to get it to exit out of the selection command. AutoCAD Civil 3D 2013 Hotfix 1 solved the problem and all was good.
When our office decided to all move to 2013 last month (DEC 2012) I installed it on the workstations then installed the AutoCAD Civil 3D 2013 Service Pack 1 skipping the hotfix. I assumed it was included (WHICH IT STATES THEY ARE IN THE README). Sadly I was wrong because we are experiencing the same issue all over again. All of our workstations that installed 2013 and then SP1 without installing the Hotfixes.
I have tried to install Hotfix 1 on these workstations but it doesn't install on the SP1 version AND there is no way to uninstall SP1 without uninstalling Civil 3D all together.
We need this to get fixed sooner than later because it is a major hassel to lock up everytime we go to plot.
View 3 Replies
View Related
Jul 28, 2012
Recently purchased Corel X5. I really like the editor and find it intuitive, fast, and stable, but the program that creates DVDs is giving me fits with a long list of issues. One of the main issue I have is that when I go to preview a DVD, more than half of the time the program immediately aborts and kicks me entirely out of Corel. I end up having to re-start Corel, go back into the DVD creation portion, and try again. Eventually, the preview works. If I don't close the DVD program and then save the project in the editor before running the preview and it aborts, I lose my changes, so I have to constantly go back to the editor and save my project when working on a DVD menu.
View 2 Replies
View Related
Nov 21, 2012
I'm trying to automate plotting DWG to make PDF.
My File :
My DWG has one model and one paperspace with view of the model.
Each view can have many viewport and has a cartridge.
My Goal :
I want a PDF File. One view per page.
My method :I have an intermediate step, which create many Postscript File(One per View)
The second step use GhostScript to concate PS Files in a PDF.
The steps:
1st step : Read DWG File to create script file, in order to automate plotting with AccoreConsole.exe. My method give me the point for plotting in a window with both corner.
2d step : Use the Script File and Software like (TRUEVIEW or ACCORECONSOLE(Autocad 2013) to create PS Files.
Last step : Run GhostScript to make my PDF File as I wish.
Problem :
Old method It works with DWGTrueView, but I would like a silent mode for executing.
Solution ==> use AccoreConsole.exe include in Autocad 2013
New method Using Accoreconsole with a ProcessStartInfo, I realized that accoreconsole.exe can raised error that DWGTrueView didn't raised.
It works with some files, but sometimes, it's crashed, and I don't understand why.For exemple, a file that succeed with DWGTrueView
View 4 Replies
View Related
Apr 23, 2012
When plotting profile plan sheets, there is an error in the scaling of the grids. I can not seem to figure out why the plotter is not plotting correctly. I did try creating a pdf of the plan sheet and plotting, but still have the same scale error. It starts to get off scale after about 500 feet, so the error in scale is small, but still there. It is off by about 2 or 3 feet at 500 feet on the profile grid.
View 2 Replies
View Related
Feb 7, 2013
I'm attempting to print from LR4 print module to a Canon Pixma Pro 9500 using a mac platform. I have 25 contact sheets to print (don't ask!!) and it's taken me 2 days so far and I have managed to print 18 of them. The printer is working. Lightroom appears to be working.
View 1 Replies
View Related
Feb 26, 2013
I'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
View 4 Replies
View Related
Jun 16, 2008
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
View 3 Replies
View Related
Feb 25, 2011
I have plotted to PDF before, but on this particular drawing I'm losing some part of the drawing.
Two viewports at different scales. The larger viewport (zoomed in) plots perfectly. The smaller viewport (zoomed out) only plots the CAD layer (green line), but does not plot the Shapefiles (green dots and gray lines). Shapefiles are on their own layer, that layer is turned on. These are the only three items in model space; the black text and arrows are in paper space on the layout tab and render correctly in the large viewport.
Is it a scale issue with the shapefiles in the small viewport or a plotting issue?
View 9 Replies
View Related
Dec 4, 2013
I am using the geo map command to display a hybrid sat and road map behind a dwg in 2014Map3D. It displays fine on my monitor, but when I plot (whether to a plotter or to pdf) it does not include the background image map, just the vector part of the dwg. Is this a limitation of the geomap command or is it something I can fix? Usually my work is in locations where I can get raster topo and this plots fine as a background, however on the odd occasion the work is somewhere in the world where raster topo is not available and geomap is better than nothing. I can always import the dwg into Global Mapper from Blue Marble and bring in background imaging there, but then I can't plot at a specific scale.
View 7 Replies
View Related
Sep 6, 2011
When I plot to a pdf file from MEP 2012, all the floor plan and basic lines and text sheets plot to about a 200k file, but when I plot the spec sheet I end up with a file size of 5meg and up. I am using word2cad to import large spec sheets from word.
View 2 Replies
View Related
Oct 25, 2012
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
View 4 Replies
View Related
Aug 9, 2012
I'm having issues plotting using dwg to pdf. It prints perfect printing to my printer but when I create a pdf using dwg to pdf it does not print what is previewed.
I created block with solid hatches for my mark/schedule boxes and detail bubbles so I wouldn't have to trim whats behind it.
View 9 Replies
View Related
Apr 26, 2013
I am trying to embolden lineweights to stand out on the drawing, without them getting in the way when viewing in the drawing. I have set the lineweight in the layer dialogue box to the max size (2.xx mm), checked the "plot lineweights" in the printer dialogue and switched between none and grayscale (this is so the assigned colors will fade out in the background). Nothing I have tried thus far has changed the print output on any of my printers (virtual PDF, HP2100, HP2600n, HP2840 they are all very old). I have read through the lweight command and help sections, but I don't need it assigning the lw just getting it to properly print.
One possible problem: is the line weight relative to scale or is it absolute? I am printing at 1/8" scale, and that can't change.
View 2 Replies
View Related
Oct 5, 2013
I have been working with a large scale architectural drawing provided by my cleint's architects. Since I usually work in black on a white screen, I have been working from paperspace with the viewport set to.monochrome. Up until Thursday, whenever I printed to PDF, I would get a monochome image which is what is supposed to happen.
However, In order to provide my client with a colour coded image, I changed some settings and printed a colour PDF. Now I cannot get it to go back to Monochrome. What setting has changed. I opened an earlier version of the same drawing and output a PDF from that drawing - black and white PDF. Try it from the current version of the drawing, it comes out in colour.
I have compared page setup settings, output setting, viewport 'MO' settings, they are all the same. How do I get back to black and white output.
View 4 Replies
View Related
Feb 13, 2013
We are Town Planners. So we Work with SG Diagrams alot. I need to import co-ordinates that have been provided on a General Plan. how to do this.
View 5 Replies
View Related
Nov 7, 2012
Some of my linework is not plotting. This only happens on one of my .dwg files (that I can tell), and only on certain layers. Recently drawn linework only on a few layers simply does not show up on preview or on hard copy, regardless of which printer I print to or which configuration I use. It's not a computer issue because the same issue happens if I open the file on a different computer. All layers are thawed, on and set to print.
However, if I Xref the file into a new drawing, then the linework prints. Here is a copy of the error message I receive.
Job: - Error(s) Did Not Plot
Job ID: 1
Sheet set name:
Date and time started: 11/7/2012 10:27:57 AM
Date and time completed: 11/7/2012 10:27:59 AM
UserID:
Profile ID: <<Unnamed Profile>>
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Error(s) Did Not Plot
File: C:Documents and SettingsAdministratorMy DocumentsMy DocumentsProjectsArlington 360 12-03Design12.11.06.Landscape.dwg
Category name:
Page setup:
Device name: Canon iPF710.pc3
Plot file path:
Paper size: Letter(8.5"x11")
ERROR: Graphics Not Generated
View 3 Replies
View Related
Oct 18, 2013
I'am a quite expert Autocad user, but I have now a version wich seems to have some problem in plotting using Monochrome.ctb or Grayscale.ctb
If I choose one (It's the same problem with both), all the coloured layer in the layout visualization become black of course, but if I preview or I print it, the pdf created has all layer's colours.
of course the PLOT WITH PLOT STYLES box is checked.
View 1 Replies
View Related
Sep 4, 2013
I have attached a FDO image and created two different views in paperspace. One at 1:7500 and the other one at 1:2500. All is good until i want to plot the drawing. The native dwg objects are plotted right but the FDO image is plotted at the same scale in both mviews ?
View 6 Replies
View Related
Mar 12, 2012
I'm putting together an elevation where I want to be able to pdf the drawing in color but I'm having trouble getting the colors to plot. For instance I'm using color 37 and in the plot style table editor the color is set to 37, pen # is "automatic" and virtual pen # is "37". When I plot to a pdf that color doesn't even show on the plot. What am I missing here?
View 2 Replies
View Related
Nov 28, 2011
when i try to plot a layout or modelspace with a pdf xref'ed into it, to a new pdf, the resulting pdf is illegible - first off it becomes rasterized even though it's a vector document produced from word, and secondly it is extremely low quality. I have looked far and wide for settings that might work with this but I have come up empty -
View 9 Replies
View Related
Aug 3, 2011
We've got a file that's only plotting some layers and not others. All layers are on, thawed, and set to plot, so I don't have a clue why they aren't showing up. There's a plan that's x-reffed into model space and then showing through a viewport in paper space, and a title block x-reffed into paper space. Some layers in the plan and all layers in the title block are not plotting.
We're using AutoCAD Architecture 2008.
View 2 Replies
View Related
Aug 2, 2012
I've selected a .ctb (that i've used in the past on AutoCad2010) in the page set up, but when I try to plot the colors are still colors instead of black and the lineweights are printed as assigned....
I'm still fairly new at autoCAD and feel completely stumped. the "plot with plot styles" is checked... What am I missing?
View 7 Replies
View Related
Aug 17, 2011
I like using wipeouts in adding text over busy sections of plant layouts. When they are printed as an pdf on an A3 they usually print fine. If the pdf is printed as an A1 or A O then the wipeouts have like a solid hatch pattern over them. I would like to continue using wipeouts to add text over details on a drawing if possible.
View 3 Replies
View Related
Apr 14, 2012
Any new layers that I create show up fine on model space and paperspace, but do not show up when I try to plot or plot preview. Plotting is not disabled in the layer controls and the layers are not frozen.
View 1 Replies
View Related
Dec 27, 2013
I am still confused when it comes to My units and plotting to scale. If I want my drawing at 1/8" scale what would I set my units to and what would I set my scale to when plotting?
View 2 Replies
View Related
Feb 21, 2012
I have a drawing where I've xref'd (8)8.5x11 PDF'd documents using the PDF underlay option. The program runs fine, however something strange happens when I plot to PDF. For some reason ploted PDF file size becomes quite large (in this example, the (8) original sheets is roughly .6MB before I bring them into autoCAD LT and when I plot to full size pdf the pdf becomes ~25MB). Is this normal? Is there a way to reduce the file size? I should mention that the pdfs are almost completely text. I've tried 'breaking' the PDF into individual JPGs and bringing in the images into the sheet, but the file size is still huge. Is there a better way to bring in pdfs so that my ploted file size is more managable (I can deal with 1-3MB per sheet, but 25MB is, well, ridiculous).
View 4 Replies
View Related
