AutoCAD 2010 :: Cannot Find Drawing On Initialize
Jan 26, 2012
When I start my 'puter up for the first time for the day and I double click a drawing file to open it, without first starting ACAD from the ACAD.exe, it begins to open the file but then says it cannot find it, but it still starts ACAD and opens Drawing 1.
This may be linked to another problem I need an answer to.
I had 2011 C3D installed, uninstalled it, then installed 2012 C3D. Stand alone license.
Now the icons for all dwg files, the one that should show that ACAD is the application that opens it, does not show in windows explorer. See the attachment.
I have done the "file open with ... Always use the selected..." thing with no result. I have also used the repair function on the install disk with no result.
View 1 Replies
ADVERTISEMENT
Jul 27, 2010
When I try and open a file from the network that another user already has open, I receive the following message:
"Cannot find the specified drawing file. Please verify that the network drive is available and the file exists".
This happens when using Novell Netware. Is there a resolution?
View 2 Replies
View Related
Dec 2, 2010
I am cleaning up our company standart blocks and there is a font I want purged/deleted, but I keep getting the message that the font is in use.
I have checked the dimension styles, the multileader styles and cannot find it.
Is there a way to find out where it is being used?
View 8 Replies
View Related
Oct 17, 2012
I started 2D drawing in ACAD2010 without any settings like unit,layers etc.
But i want to know, How to find the unit am i using the dimension ? like inches or mm.
View 1 Replies
View Related
Aug 28, 2012
i have gotten a drawing from another user and have managed to purge all of thier layers except for one. I have deleted everything out of the drawing, done "select all" numerous times and deleted, but this layer still won't let itself be deleted. I have made sure it is not the current layer, w blocked the whole drawing etc. There was an ole image in this drawing at some stage, could that have left this horrible layer "25L"???
I hate when i have rogue layers in my files
View 3 Replies
View Related
Jan 24, 2013
Is there a way to find the latitude and longitude of a point in an AutoCAD drawing?
View 4 Replies
View Related
Jan 27, 2012
I've got a user that has his page setups setup correctly and set current, but when he goes to the publish command it only grabs the model space. even if he checks the "Initialize Layout" (and unchecks "Initialize Model") option in the context menu, it doesn't stick...
I have him rebooting now (we tried closing ACAD (and made sure the process had stopped) and then restarted ACAD and it still wasn't working)
View 2 Replies
View Related
May 23, 2012
I cannot find my point settings.
View 7 Replies
View Related
Jan 24, 2012
I am using windows 7 on my macbook pro. I am using autoCAD 2010. I can create and save files, however I can't open them. When trying to open a file, a message pops up saying "Cannot find the specified drawing file. Please verify that the network drive is available and the file exists."
View 4 Replies
View Related
Dec 13, 2012
Any command that I could use to find the scale of a drawing. I am having to put some vendor drawings into company borders and I am having to do it by eye currently (which I really do not like doing). I am just curious if there is some way I can find out the scale of the existing vendor dwg so I can scale the border correctly and accurately.
View 9 Replies
View Related
Dec 10, 2013
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
View 5 Replies
View Related
Sep 11, 2012
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies
View Related
Jul 25, 2012
I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies
View Related
May 31, 2013
I'm trying to write a VBA macro (for Inventor 2010) that would have to work on drawing .idw files that are generated from a given component.So when I have an open assembly document, I want to go through all component occurences and work with the associated drawing.
There's a built in command in Inventor for that, in the context menu, something like "Open drawing" (mine is german, so not sure how it's called in english), which does this. It opens the drawing of the given part. From this I assumed, there must be a reference within each part, that points to the referencing drawing.
But I'm not able to find this information anywhere within the properties/objects of any component.how or where can I get this information out of the components?
View 5 Replies
View Related
May 3, 2013
how to identify the model associated with a particular PL on a drawing. I'm able to find a PL and write to the header which is cool. But I'm trying to determine the model associated with the BOM pipline so I can get it's P/N iproperty and write that to the PL header.
View 2 Replies
View Related
Oct 27, 2011
How do I get the xrecord attached to an entity in a drawing, without key?
View 1 Replies
View Related
Jan 9, 2012
Today i Get new Drawing then i tried to find out the area of certain room. Then The Room less than 10 m2 is ok but the area more than 10 m2 meter is coming like this area 1.03310963E+07. How to change this setting.
View 3 Replies
View Related
Jul 1, 2012
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
View 2 Replies
View Related
May 8, 2012
So i turned off the "command line completion" settings. However, now I have to type in the full command in order to run it. I found that there should be an "acad.pgp" file somewhere in the support paths that will allow me to define command aliases. So i did a complete search of my C: drive for "*.pgp" and the search came up empty; I tried a few different ways and places (trying narrow it down) but couldn't find ANY of these files.
I have the student version of 2012. Does this have something to do with it? I wouldn't think it should because of what it says on the education site: "Important Note :The Autodesk Student Version software incorporates all the functionality of our professional licenses, but includes a print banner making the software inappropriate for professional, commercial, or for-profit purposes."
Win 7 64bit
Intel i7 2.30GHz
8Gb DDR3
View 6 Replies
View Related
Sep 25, 2012
when i add a custom template file location under options>files>template settings>drawing template file location>default template file name for QNEW i i get the error message c:program filesautodeskautocad mechanical 2012acadmamg3dim.arx cannot find a dll or other file that it needs. if i remove my custom template file location and leave it blank, i get no error. its the same thing for the drawing template file location, if i change the default file location to another path, i get a different dll error message when launching cad.
View 9 Replies
View Related
Oct 10, 2012
I am working as an IT Support staff in a small organization. Being a new employee here I could not find out the details of AutoCAD 2010 CD, whether its a single user or network user, its upgraded or not. How Can I find these details using the serial number and product key of the CD.
View 2 Replies
View Related
Jun 18, 2012
I am receiving this error whether I am attempting to view a drawing file via the network, via a lotus notes database, or loaded locally.:
"Cannot find the specified drawing file. Please verify that the file exist"
The Autodesk product I am using is Autodesk 2012 LT (trial)
The operating system is Widows 7 (64 bit)
I have had the same error for multiple Autodesk readers aswell on this same PC including:
Design Review 2013, 2012, 2011
True view 2013, 2012
I have administrative rights to the profile in question and I have also attempted to use a separate profile but received the same results. All attempts to manually set the file association have liekwise failed. the program will initialize, but the error message returns with no ability to veiw the drawing file(s).
I have also removed/uninstalled all of the above mentioned programs via Autodesk instructions/procedures for proper removal of folders/subfolders/registry entries (HKey local machine and current user) as well as stoping any autodesk program running in task manager.
My next step is to re-image the machine to make the file association stick to an autocad program.
View 6 Replies
View Related
Aug 9, 2012
I would like to know how I can find a dimension that's created with the command (with the internal command name) "Create3DLinearDimension".
This command is used to create a linear dimension on a view that has the default dimension type set to "True".
View 3 Replies
View Related
Jul 31, 2012
I need to find lines that overlap one another in a drawing and mark them, not delete them. I am running AutpCAD Map 3D 2012.
View 3 Replies
View Related
Apr 16, 2013
My question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
View 1 Replies
View Related
May 14, 2013
I need to change the section view name height..I can able to collect all the text and also able to change the height. But only for the view names i need to change the height. Im using COM API...
Here is my code.
//why i used 3 here is ,because section view name strings will be like" A-A"
//im also try to assign color for the view name
if (acadText.EntityName.Length.Equals(3))
{
acadText.Height = 6.0;
AcadAcCmColor sectionViewTextColor = acadText.TrueColor;
sectionViewTextColor.ColorIndex = AcColor.acMagenta;
acadText.TrueColor = sectionViewTextColor;
acadText.update();
}
View 2 Replies
View Related
Aug 6, 2013
I'm trying to find the quantities of blocks on drawing. I used "quick select" command - select by Block Reference. My blocks have some customer’s attributes (for example type of block) which I couldn't find on block reference list.
View 9 Replies
View Related
Dec 19, 2013
is there a way of find and replace tab names in one drawing file? one file with six tabs named 001 rev A, 002 rev A etc. i would like to change all the "rev A" to "rev 0" with out going into each tab seperatly and changing them.
View 2 Replies
View Related
Apr 10, 2012
when i click on my express tools and the arc align text command, it doesnt work says unknown command arctext what file holds this command so i can check to see why its not loading
View 2 Replies
View Related
Jul 27, 2012
how to add the 'Enter' or 'Return' key using find and replace on mtext? If you look at the properties of mtext you see a P for a line return (or 'Enter') but if you type P in your find and replace it will replace it with '\P' which will actually show you a 'P' in your mtext. how to get a hard return?
View 1 Replies
View Related
Jun 21, 2013
How I can handle the FIND command in script
So in 600 drawings 20 different texts, change in MTEXT, TEXT and ATTRIBUTES
View 6 Replies
View Related
