how to add the 'Enter' or 'Return' key using find and replace on mtext? If you look at the properties of mtext you see a P for a line return (or 'Enter') but if you type P in your find and replace it will replace it with '\P' which will actually show you a 'P' in your mtext. how to get a hard return?
View 1 RepliesHow I can handle the FIND command in script
So in 600 drawings 20 different texts, change in MTEXT, TEXT and ATTRIBUTES
I am wondering if there is any way to 'find & replace' a carriage return; specifically to add one in. I have figured how to take it out.
the reason I want to do this, is because 'tcount' will increment, by the amount specified, for each line of mtext; I have multiple lines of 2 line mtext, and I want to 'tcount' one number in the first line of each instance of mtext.
Now, I know I can do it manually, and in fact I would have had it done almost an hour ago if had, but this issue crops up every now and again, where if there was a fix or work-around to the 'tcount' issue (such as somehow inserting a carriage return) my efficiency could be increased.. for example I could get through renumbering 30 instances of 2 or 3 line mtext across 15 different drawings..
In autoCAD 2013 i have a sequence of multiple text fields e.g. (MP01, MP02, MP03, MP04..etc) i need to alter the numbers to other numbers. I used a command a few months ago but i cant remember what is was called! It selected the x/y direction and incremented the existing sequence to my chosen sequence (just incrementing the last numerical bits and leaving the text the same). Ive tried TCOUNT command and i couldn't get that to work with the text fields.
View 1 Replies View RelatedIn AutoCAD Architecture 2012 (AutoCAD 2012) I want “Entire drawing” selected by default in “Find where:” in “Find and Replace Dialog Box” instead of “Current space/layout”.
View 1 Replies View RelatedI have a dwg with (dynamic) blocks and when i do a find and replace, it finds ivisbile text that aren't there. i did allready purge, there is no freezed or off layer. even when i copy the whole drawing into another empty dwg it appears.
View 2 Replies View Relatedi have a csv file that has 6 columns, PNEZD and a 6th column which is my notes..i type a star in the data collector after my code, make my note, and then find/replace after i export it and replace star with a column..that gives the desired 6th column in excel that my boss wants....problem is he also wants to see that next to the Full Description in Civil 3d 2012...i tried adding a Point File Format with a 6th Column, User Defined, String for type...named the column Notes...but if i go to edit the point there is no 6th column in the Tool Palette.
View 1 Replies View RelatedIs there a possibility to find and replace box keep always open. What I need is to find a certain text, make corrections on the drawing (not in that text) and click NEXT to jump to the following text with the same content. Constantly opening and closing commands takes lots of time.
View 1 Replies View RelatedI need to replace some text in a bunch of mleaders but the find/replace doesn't seem to work.
c3d2012.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
Writing a rule to find and replace text in a dwg?
AutoDesk Inventor 2012
I have to revup a heap of drawings by modifying the drawing block of each drawing (simplying changing Rev C to a different letter ) and adding in todays date. Is there a quick way i can modify all drawing blocks without opening and modifying each drawing manually? Unfortunately, the drawings are all standalone and dont reference an external drawing block.
I am using Civil3D 2010
quick and easy way to rename all the Styles in a .dwg or .dwt?
I want to replace a current prefix "HCS - *" with "HE - *" to all styles in a prototype file.
Civil 3D 2013
I am trying to replace multiple instances of a multiline text entity throughout several drawings and can’t seem to find a good way to make this come to fruition. (must use carriage return to differentiate between other instances of the text) ie
Replace:
Name
Location
Date
Vs
Replace:
Name
I need it to replace the text in the instance that has multiple text lines, and not the name where the text is on it’s own. I have seen mention of using “u+000A” as a carriage return in older versions, but I can’t get it to work.
When I use find and replace text in Autocad 2008lt the text that has been updated is now prefixed with a semicolon why ?
View 9 Replies View Relatedis there a way of find and replace tab names in one drawing file? one file with six tabs named 001 rev A, 002 rev A etc. i would like to change all the "rev A" to "rev 0" with out going into each tab seperatly and changing them.
View 2 Replies View RelatedI want to know that to find & replace a text in a dwg contains several layouts, so want to replace the text in all layout in one shot.
View 2 Replies View RelatedThe standard AutoCAD Find & Replace dialog doesn't seem to work on a dynamic block's visibility states. I have quite a few blocks with 8-10 visibilities in each one that I need to change.
View 3 Replies View RelatedI think my problem should be easy to answer, today out of nowhere I suddenly had to type in the file names for different commands such as "save as" or in the layout options "from template" usually there pops up the standard folder list where you can choose the file you want.
In the pic you can see what happens if I'm clicking on "save as".
I'm looking for a lisp routine that can find and replace multileader text.
I want to replace "T." with "T+" and "B." with "B+".
All the multileaders are on layers with a suffix of "-elev".
I having real difficulty finding a lisp that will find and replace blocks. There are plenty out there and AutoCAD 2013 and lower has a Find and Replace Blocks. However, the frustrating catch is I can seem to find a routine that will allow me to replace only those blocks that I select with a selection set of my choosing. The built in function replaces all of them and will not let you exclude some. We have PID drawings that we want to replace valves on, but not all valves. We don't want to rename. We don't need to BEDIT the existing block.
1) Pick group of blocks
2) specify a new block that will replace all instances of old block
3) replace inserted block with different block. Leaving others alone.
I'm thinking this should be easy, but my search has failed. The blocks in question are not dynamic or attributed either.
I have a “PART” block with attributes tags “PARTMARK” and “SHEAREDFROM” inserted 5 to 10 times in 10 to 50 drawings.
The “PARTMARK” value is always a unique number entered in autocad.The “SHEAREDFROM” value is calculated in Excel and exported to a “SHEARED.txt” file.
In each “PART” block I need to replace the “SHEAREDFROM” value based on the unique “PARTMARK” value, using a script that uses (or incorporates) the values from the “SHEARED.txt” file.
So far the only solution I’ve come up with is having a unique value for the “SHEAREDFROM” and –attedit to change the values in a script. However if the script doesn’t encounter a "K20-1S" in the first drawing it errors out and doesn’t proceed to the next. Below is an example of my rudimentary script.
(command "-attedit" "n" "n" "PART" "SHEAREDFROM" "K20-1S" "K20-1S" "8-60x192")
(command "-attedit" "n" "n" "PART" "SHEAREDFROM" "K20-2S" "K20-2S" "2-60x144")
(command "-attedit" "n" "n" "PART" "SHEAREDFROM" "K20-3S" "K20-3S" "2-60x132")
(command "-attedit" "n" "n" "PART" "SHEAREDFROM" "K20-4S" "K20-4S" "4-60x120")
(command "-attedit" "n" "n" "PART" "SHEAREDFROM" "K20-5S" "K20-5S" "0.7-60x120")
I’m assuming I need LISP to do this, but my LISP skills are limited. I think I would need a setq for each unique shearedfrom value (setq K20-1S (“8-60x192”))? Then somehow search each drawing for the unique shearedfrom value to replace.?
Is there a lisp or script program that will find and replace pre-defined text/mtext value of eg " issued for tender " for "issued for construction" without having to select anything.
View 9 Replies View Relatedhow I could open an external .CSV file which is assigned to a variable called INFOFILE and scan line by line and replace each instance of the string "WIDGETTE" with the string "WIDGET"? I assume the function vl-string-subst woud be involved.
View 9 Replies View RelatedI am trying to globally find and replace text in Autocad 2000 drawings. If I have a folder containing 10 Autocad files, I want to open every file in that folder, while in each file, search for a certain line of text and replace that text, then close that file, open the next and find/replace text in that file.
I've created an autolisp file that allows me to open all the files in a certain folder, but I can't find any way, either thru autolisp or scripts, to allow me to find and replace text in each autocad drawing without using Autocad's "find" command to manually enter the text when each drawing is open.
I want to setup the autolisp file to accept input up front, save the "old text" and "new text" to variables, then use those variables as the lisp routine is running.
This version was used to automate creating PDF files. The command 'PDF' is a command from another Lisp file.
in the old autocad that i had for PC there was a command to re-select all selected items by typing P and then enter. I now have 2011 autocad for mac and can not figure out how to do the same thing.
View 3 Replies View RelatedHow do I turn on the dialog boxes when I enter commands? I finally found HPDLGMODE for the hatch command, but I would like it for all commands, especially array.
I have my FILEDIA set to 1.
Using ACAD2013, any command I try to execute requires two clicks. This specifically occurs with transformational commands - i.e. offset, rotate, mirror, but not line. For example I will enter the "OFFSET" command and hit enter, however instead of prompting me to input my OFFSET variables I will have to hit enter again and then enter the requisite variables. In effect I have to hit enter twice to execute any command of this sort. I have already tried changing my PICKFIRST settings, and AUTOCOMPLETE. I'm at a loss.
View 9 Replies View RelatedI am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
Is there a reason the find and replace feature will work in certain areas of an image and not others?
View 2 Replies View RelatedAny tool , macro , or VBA code to find a specified part of layers name and replace them with another words which i written as entry.
i use X6 , also i can't use BD layers (brian davis layers) macro, it wont install and looks wont work.
the options given are rarely used the most important one is missing
find and replace paragraph returns indesign does it elegantly, but illustror has been the same for years with obsolete options
how hard it is just to use the same functions that ADOBE indesign, this is a terrible case of incosistency between the two products when claiming total integration to me is an epic fail, i would have fired my employes over this