export a MAX file into OBJ or STL. The reason I can't do it is that the file doesn't open for me in 2010 or 2011. In the 2012 version, I get an Out-of-memory error. Am guessing because the original file has been done in the 3DS Max 2012 64-bit version. So if you can do this odd job, am willing to pop 25 USD for the same.
View 9 RepliesI recently switched from a Dell PC to a Mac and wondered if there is an exchange program or an upgrade change to keep from having to buy a whole new copy for the Mac.
View 2 Replies View RelatedI have a need to convert about 14000 .dwg files to jpg, gif or bitmap for display on the web. Are there any good automated ways of doing this. We have a database that contains the drawing names and directory locations I wish to use this for converting all of the drawings.
View 7 Replies View RelatedI use CS3, 3gb of Ram and more then 50mb of free hard disk space.
When I convert a Raw image to Jpg the file size is reduced but opened in CS3 the Image size appears unchanged. What is the correlation between image and file size? I thought the Image Size was the horizontal number of pixels x the vertical. If this is correct and the jpg has less pixels how can CS3 show it as having the same image size?
in addition what is the use of Image Size other than to indicate the print size at a given resolution?
I am working on Photoshop CS3 with 24 bits Bitmap files.
I would like to know how to convert a 24 bits Bitmap files to 565 RGB files.
Opening Nikon D300 jpg image (Bridge CS3/file/open with/photoshop) does a sRGB->aRGB conversion. Why?
The D300 metadata shows Color Mode RGB and Color Profile sRGB IEC61966-2.1 so that looks good. PS Color settings/Working Spaces/RGB is set for aRGB and Color Settings/Color Management Polices/RGB is set for Preserve Embedded Profiles (and the three check boxes are checked). I expected the sRGB embedded profile to be preserved but that isn't the case.
I like to use LAB fairly often and have done so in CS2 with no trouble. I'm on Windows XP Pro, 1 gb RAM.
Now that I've loaded CS3, same image converts to black. All over black. Edge to edge black. I mean BLACK!
All channels are active (L, a, b). No mask is in effect. My working
space is ProPhoto.
If I convert it back to RGB, the image is still there.
What's going on here with CS3? I've done the usual color settings. I've deleted my preferences.
Also, when loading PSCS3, a message always pops up saying "there must
be at least one document open to run this script!" Don't know where
that comes from either. I'm not trying to run any script, just opening Photoshop?
I'm thinking I'd better uninstall CS3 and start over. Before doing
so, though,
I usually come across this situation where i have to convert PDF to DWG. now i do it with underlay and trace it approx. Is there any converter for this purpose?
I want a software to convert PDF to DWG/DXF with relative amount of accuracy.
since I can't seem to find any definitive information on this... how's Lighroom 4 dealing with 14-bit raw NEF files (coming from a D7000 in this case) when it is converting to DNG? Is the entire 14-bit colour information being kept or is there some sort of loss or conversion going on?
View 3 Replies View RelatedI have recently switched to shoot my photos in RAW format. I do the usual adjustments in Camera Raw and the hit "Open Image". Next is that I save my image as JPEG with the Maximum Quality. Once I look at my saved JPEG file though I find that most of them have a lot of noise and seem not to reflect any adjustments that I did to the RAW file.
View 9 Replies View RelatedI work in a school district that is running an old version of Adobe Photoshop CS3 in a Macintosh environment. The Macs are old 10.4.11 machines that would not print. So, I set up a Windows Server with Macintosh accessible folders and copied files to this server. I then had newer Windows 7 client machines available and copied the files over to their client machines. Some of the files came over to Windows as CS3, but others didn't. They show up as "File" in the format and not as CS3. Is there a workaround for this, or another way to get these files to Windows?
View 1 Replies View RelatedHave been reading thread that one had posted about converting PSD to JPEG. From what I have read, seems as though no matter what you can not replicate the image you have created as PSD. I have worked on a photo that was taken on my BB and to my pleasant surprise have been able to correct several issues. I believe it looks so much better because of flattening and 16bit application.
Must say color, focus(originally was terribly out of focus) everything is great. However, cannot covert and keep the work I have already done with Photoshop. Can I convert to JPEG or any other format that allows sharing without sacrificing what I have as PSD ?
I am working with a .jpg(rgb) straight off of a camera, I have converted it to CMYK as this is a photograph that is going to be submitted and printed and they want it CMYK , obviously.
Now I am aware that CMYK isn't as 'colourful' as RGB so I understand that.. Only when I save my photograph and open it, it is completely different to the photoshop file. COMPLETELY! And even when I reopen it in photoshop it is different.. See the image/attachment below is Photoshop vs Just open...
I have tried just the simple
Save As > .jpg
Save for Web as Jpg
Save for Web as Png
they are all doing the same?
I use CS5 on a Mac.
I have a multitude of old edits with the ext .pspimage. I have googled and tried the 2 most likely options I found with no success, is there any way to open them in CS6. I would like to convert them and save them as .psd. There must be a way surely.
View 12 Replies View RelatedI recently photographed a set of pastels in raw. The body of work has been reviewed and the final color balance has been approved by the artist. I now need to export the images from their raw files to CMYK. to provide for offset printing. Adobe provides a number of options. I am completely lost on the options to select.
The Source Space is Adobe RGB 1998
The Color Space Conversion Options are:
Conversion Options
Engne:
Adobe (ACE)
Microsoft ICM
Adobe CMM
Intent:
Perceptual
Saturation
Relative Colorimetric
Absolute Colorimetric
Selections with Selection Boxes
Use Black Point Compensation
Use Dither
And, of course there is a CMYK Set of selection options that I assume are based on the paper the printer will use.
Do you have a recommendation on the Engine, Intent, Black Point, and Dither.
I have finished a logo for my friend Bob in Corel Draw X4. Made it in CMYK color mode. Used 3 nuances of green color previously given to me vith RGB values. My Corel change it to CMYK. I sent the file to Bob.
He has Corel Draw X5. When he opened the file and checked the CMYK values he was surprised because they were different from mine.
I immediately found an on-line RGB to CMYK converter to check which data is more valid when i got totally different CMYK values. Now i am truly worried and don't know what to think.
Here are the values:
BOB
RGB 116/195/101
CMYK 60/0/84/0
RGB 41/171/135
CMYK 80/7/64/0
RGB 144/238/144
CMYK 42/0/63/0
ME
RGB 116/195/101
CMYK 31/0/37/24
RGB 41/171/135
CMYK 51/0/14/33
RGB 144/238/144
CMYK 37/0/37/7
ON LINE CONVERTER
RGB 116/195/101
CMYK 40/0/48/23
RGB 41/171/135
CMYK 76/0/21/33
RGB 144/238/144
CMYK 39/0/39/66
I need to convert AVCHD footage to 1280x720 MOV (qt) files. VSX2 via create a video file, and VSX3 can do this via video file creation and batch conversion as well. The problemis that I can't find any setting to get the bitrate of the MOV files under contol. VSX2 generates files with very high bitrates, VSX3 with low bitrate, and when I select "check data rate" in the advanced options settings for the MOV file, I get a prompt at every new file start (and I have many files) like " the bitrate exeeds the settings...do you want to continiue" .
View 10 Replies View RelatedI have Canon HD camcorder, when i import to my PC it is .mts file. I edit my .mts file using X4 Video Studio, Now i want to make DVD, which format i should select for best result with compress size ?
I tried DVD 4:3 then my video quality is goes down, and if i select DVD 16:9 then file size is increase much, which format i should select to keep file size low or same with same video quality.
I recorded my son's flag football season using my Sony Camcorder listed in my profile. It records in DV AVI files in 4:3 format. I edited the AVI files in my .vsp file using X2 Pro in 4:3 format, converted my .vsp file to the mpeg2 file in 4:3 format, then authored and burned my DVD movie in 4:3 format. I just recently bought a Samsung 46" LCD TV, which is 16:9. When i play the DVD movie on my TV in the 16:9 format, of course the video is distorted (looks stretched). When I play the video on my LCD TV and set the format on the TV to 4:3, it looks perfect. Here's my question........how do I get my DVD movie to look natural on the full 16:9 video screen of my LCD TV? Or will it never look natural because the original video recording from my camcorder is locked in at 4:3? If I can get it look natural on my 16:9 TV, at which stage do I convert from 4:3 to 16:9....at editing, at video file conversion or DVD authoring?
View 4 Replies View RelatedI am in the process of coverting over to the STB plot style format and I have a problem which I cannot understand.
While in the drawing I want to convert I started with CONVERTCTB, the dilague box appears and I selected my current CTB plotstyle (the one I use to do my regular plots with) and upon accepting it another dialogue box appears asking me to name the new STB plotstyle. I did so and a message came up informing me the conversion was successful.
I then typed CONVERTPSTYLES and a message comes up followed by the dialogue box where I am to select an STB file. Here I selected the file I created in the CTB conversion in the previous step.
The conversion seemed to work correctly but when I go into the layer properties manager the plotstyles all have the same named style ie style 1, when I select one of these plotstyles to change it all except 3 styles are noted as missing.
I read that when I complete the conversion I should have plotstyles with old_pen_01 etc.
I have attached a snap shot of the resulting layer manager. The active plotstyle is the one that was converted during the CTB process ie the first step above.
Convert file igs to dwg. Only using inventor or some other apps. bcoz igesimport giving too many extra lines to work with them. There are 3 files and they are more than 1.5mb.
so i upload them in mediafire. below is the link
File 1
[URL]....
File 2
[URL]....
File 3
[URL]....
Please download and convert them.
Need recommendation for a pdf to dwg conversion software or cloud based service? I have alot of floor plans in pdf format that I would like to convert to dwg. I'd hate to have to draw them again.
View 5 Replies View RelatedIn my company, we are thinking about purchasing either Autocad or Autocad LT
Our customers are using Autocad to create DXF or DWG and we need to convert into GDS.
We are currently using LinkCad but the conversion success is limited.
If Autocad or AutoCad LT comes with a feature to convert DXF/ DWG into GDSII format ?
I'm currently working with PS 7.0 on a PC. Is it possible to save a graphic within PS so it can be viewed with a MAC and even manipulated by a MAC?
View 2 Replies View RelatedI have an floor plan image that is 1" = 5 meters, I need to convert this to 1/8"= 1'.
View 1 Replies View RelatedI've been using Photoshop for a while but Mom just e-mailed me a few pictures she wants to print out 8x10 (inches). How many pixels equal an inch?
View 10 Replies View RelatedI have designed a CD cover for my band that we will have professionally printed. I'm now told that having designed the whole thing in Photoshop using RGB, that it needs converting to CMYK in order that it prints out properly at the Cd Printing firm.
I have found the "image>mode>CMYK colour" function, but when I click it, it makes the whole image really dull and lifeless.
i convert an image from rgb to cmyk to be printed i loose alot of my brighter colors...namely blues....i know these rich colors can be printed...(i see them all the time on flyers and magazines)...so what can i do to keep these colors...
View 2 Replies View RelatedI'm working on an image that I imported from an .eps file. I just noticed that it's in CMYK. I'm almost done, so I can't restart. I guess because .eps files are mainly used for printing from, it defaults to CMYK. ANyway, when I go to covnert to RGB it says it may alter the appearance. I can't see any difference, but I don't want to come back and kick me later. Does anyone know of any serious problems that can arise from changin image modes halfway through?
View 1 Replies View RelatedI have a png file that is already in rgb565 format. On Paint.Net, i changed this image by completely deleting the background.
What format would this image now be considered to be in?
Could I get this Max file converted to OBJ ?
View 7 Replies View Related