I have an odd problem. When hit 'F' to go to the front viewport, the wrong viewport loads. I get a perspective looking view, and it's usually from below the grid. Top, Bottom, Left and Right all work fine. I've set the shortcut key to reference a Grid Front view as a work around but I can't pan in that view.
Is there a way to reset the viewports to default? Something has gotten scrambled.
I have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies View Relatedmy animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedHow do I change a polygonal viewport to a rectangular viewport?
View 5 Replies View RelatedProblem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies View RelatedI am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies View RelatedI did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
how do you create a viewport within an existing viewport ?
View 9 Replies View Related3D clip is downloaded from sony 3D cam hdr-td10 via USB cable using PMB software and into my Gatewayfx 6860 computer. Drive C: is solid state HD 128 Gig. Data HD (D:) is 2 tera byte speed7600 rpm. Problem seems to be that 3D clip is tagged multiview video coding instead of multiview image. Downloaded file format: NTSC HDMV (m2t) video type ish.264 upper field first 24 bits 1920 x 1080 16:9 29.97 fps var bit rate (21.999 mbps) Dolby digital 5.1 sound 48000 HZ 448 kbps. Edit file format NTSC dropframe (29.97 fps) MPEG file 24 bits 720x480 upper field first DVD ntsc 16:9 video data rate var (max 8000 kbps) lcpm audio 4800. Trying to create 3D clip to copy onto USB key to attach to Blue ray player USB port to play on my 3D TV. Blue Ray player is samsung BD e5900. 3d TV is samsung 40 inch smart TV BD player will only accept DVD FILE in 3D and not Blue-ray nor AVCHD
View 3 Replies View RelatedI installed CS6 via download and it is not the English version (I think it's Italian). There was no prompt to choose a language during the installation. How do I get the English version?
View 4 Replies View RelatedI have a canvas which is 1680x1200 and i'm designing a website. I've added some guides around the canvas but here comes my problem. Everything i create which i want to snap to those guides - snaps ....
View 9 Replies View Relatedi loaded Photoshop CS on to my new computer and the pictures and the colors are off by alot. the color looks more brown tinted.
so if i make something red in photoshop, it ends up truely being more purple.
i checked all the color setting in the "edit" pull down menu with the color setting of another persons that works.
I've had this problem in my Max 2012 and couldnt find solution. I can't get rid of this problem even after clean install of Max 2014.
UI floaters (modify panel, render dialog, mat editor) have wrong width. Notice the space on the right of modify panel icons.
The picture I've attached to this post is 180 dpi.However, Gimp says the ppi of the image is 300 (Gimp also used this information display the printed size, so it should be "dpi", but this is not my problem).
I fully understand the difference between dpi and ppi.My question is: From where is this information coming from?
My default image resolution in Gimp is 96 ppi (under Preferences > Default image > Advanced option).
When I open a clip from a bin and create a subclip, I expect that subclip will land back in the bin the master clip came from, but this is not always happening. Sometimes the subclip appears in the correct folder, and sometimes it shows up in the higher level master folder, or in some other folder, almost random. Is there some protocol to follow to make sure the subclip always appears in the folder of its master clip?
View 5 Replies View RelatedIf i write a Text in Photoshop CS 6 on a Mac the size of the Font is always wrong. For example: I write a Text in 6 Point which is bigger than a Text in 12 pt. I allready uninstall Photoshop, but i have still this problem. When i transform a textbloc it´s getting worse, seems like the text is getting bigger but the pt stays at the old size
View 4 Replies View RelatedSuddenly my Photoshop CS5 Color picker has gone wrong. It wouldn't let me change Foreground or Background colors and goes back to gray all the time. I have not changed any settings, but last time I used it was yesterday and all worked ok.
View 2 Replies View RelatedI installed the "Adobe Creative Cloud" tool.I change my language to "Deutsch" (German).Then I installed Photoshop CC. I checked Edit -> Preferences -> Interface -> UI Language.But there is no other option then English.
Is there any German version available? How can I get that? Is this issue caused by Windows 7 system language: English?
I have a problem with the 3D brush cursor in PS CC being offset and not where I'm putting the pen down. Best described by a vid which is here: URL....
The capture is a bit laggy so both brushes look a little delayed, in reality the CS6 cursor paints exaclty where you'd expect it to, the CC one is offset and it feels very unnatural. It's most evident on the first 2 strokes.Some system info, if it's of use:
Windows 7 Pro x64
Wacom Intuos 4L
i7 3930K
32GB RAM
GTXTitan
GTX580
I'm having problems with PS showing red and purple as blue. The RAW's are oversaturated with blue and nothing I do can reverse the colours. Both camera, PS and monitor is set to aRGB and the RAW files is showed correctly in the Windows folder. both the highlight and shadow warning are turned off!
View 1 Replies View RelatedI was using Adobe Application Manager and for some reason it was stuck downloading Dutch versions of the software. I downloaded and used the fix-it patch for AAM and that worked for me download English versions of all the Creative Cloud apps. How do I uninstall the Dutch version of Photoshop CS6?
View 4 Replies View Relateduser now using CS5.1.I develop webpages and quite often pend much time optimizing my imagesI have a small 20 x 20 picture used for a repeatable background. I try to save it as a gif and manage it go get all the way down to 200 bytes... Well thats at least what Photoshop tells me. Cos when I check in OSX 10.8.2 it tells me its acutally 1.2 kb... I originally made this picture in 40 x 40 which at the moment is 700b, so this makes no sence, that its not smaller than my 40 x 40. And I can see its not the wrong options I choose when saving.
I've also uploaded the image to my server, so see if it was a OSX-issue, but its still over 1kb... Is it a known bug or?
I have a windows 7 based machine with 24gb of ram and a 560to geforce video card and 980x CPU. have just reinstalled Photoshop cs5 and newest update, Photoshop now opens images at a viewing percent that is a lot smaller than the previous installation, currently a vertical image is 16.7% and a horizontal 25%, these should be 25% and 33.3% to almost fill the screen. what can I do to get images to open at a bigger zoom percentage?
View 2 Replies View RelatedI'm new to VS4 and am trying out the 30-day trial. I have a recorded HD TV clip that I am editing by making clips and adding transitions. However, after editing my audio now appears to be the Spanish SAP sub-channel. How do I get the main US audio channel back...I'm sure it's still there, but just not the selected audible one.
View 3 Replies View RelatedI occasionally download drawings from web sites, (McMaster -Carr, Grainger, etc) for parts that I'm using. They make it easy: they offer drawings in multiple formats, (I use .DWG), although there's also .DXF.
The drawings open right up no problem. Here's the problem: What I see almost all the time is that when I copy and paste those drawings into my drawing, the scale is wrong.
Specifically:Say the original drawing has a feature with two holes, and the original drawing shows those holes as 1 inch apart, center to center. I paste that drawing into my drawing, and when I dimension it, the holes are never 1 inch apart. They're some completely different unpredictable dimension,
Is there a way to paste differently so the dimensions come down right, or is there something else I need to do so I can use those drawings without all the hassle I have now?
Colour settings in PS are set to sRGB and the printer colour settings are set the sRGB too. The whole colour settings thing confuses me anyway but what could be going wrong?
View 8 Replies View RelatedAfter changing picture to black and white or any other color change the picture will print some of the original colors especially greens and tans. This occurs when changing a jpg file or using layers. It did not happen in CS2 using the same Epson printer and the same printer settings.
I am using Vista OS.
I downloaded MacHacha because I needed it to join some segments for Toast . So, I open ImageReady and use it but I look in the dock and notice a funky icon and not the right one but again, it still works but I don't trust it. I close IR and re-open it but MacHacha opens instead. I go to my Adobe Photoshop folder which contains IR with the right icon but it still opens MacHacha. So, I click get info in finder and it says that IR is a MacHacha file. WTH? I don't even know how but after I copied IR to my applications but not in my PS folder and I right-clicked get info and it says Kind: Adobe IR but it's the wrong icon. I can use IR but it's all messed up. I opened it from the PS folder and got info and it says it was modified on the 10th which I don't understand. I've used it since then and right until last night, it was working fine with the right icon etc. I also can't jump from IR to PS but the reverse works. I even tried adding IR to the dock from Apps (not PS) and the right icon appeared. However, when I clicked on it, it didn't worked and the wrong icon is shown right next to it. Here are some captures, don't click- C&P. Now, it's happening with PS 7 which is recognized as a MacHacha file.
View 2 Replies View Related