Would like to consult from you all that why my round table model will become jagged model after importing into 3DsMax? The original round table model is in dwg file. I have attached some files as reference.
Â
Jagged model: Capture.PNG
dwg file: test.dwg
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I'm trying to get a drawing flipped round in model space so it fits more neatly in a viewport. I need to rotate the model space by about 45 degrees so that a line that looked about 45 degree slope up from left to right becomes a flat line.
I've been trying to use 'ucs' in the command line and then type the degree rotation as this is what it says in the help section but it doesnt do what i want. It asks for an origin point on the x-axis and then i dont know what this means.
I'm looking for an API function that would allow me to change the active (or default?) row in the table of an iPartFactory model. I was hoping that such a function would be member or property of the iPartFactory object, but I’m not finding that to be the case.
View 4 Replies View RelatedI have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedIn our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? Â It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedIs there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies View RelatedI want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedI am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies View RelatedSay I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
View 9 Replies View RelatedWhen I want to delete the background and just have the object or person in the picture, I use the magic wand tool to delete the background then clean up with the eraser. BUT the outline of the object always looks jaggedy. This doesn't happen when I use photographs with the white background.
Is there some sort of trick I'm missing? Or do I just need more practice with the eraser tool?
i have a a problem i'm hoping someone can help me with. i've been using photoshop for awhile now and have had it installed on my computer for at least 3 years without problems. however, just the other day i've started having a problem with my fonts. whenever i use text, the edges of the text have a jagged appearance. they have a very pixilated look to them instead of smooth lines. i havent been doing anything differently nor have i changed any settings. this is happening with all of the fonts. anyone have any idea what's going on and what i can do?
View 3 Replies View RelatedWhen importing an EPS or AI file and then rasterizing it (doesn’t matter what resolution) the image looks very jagged/pixilated… even and 600res - a lot mort than it should – or should I say used to when I imported. Did I accidentally mess with the settings? Anyone experience this?btw this website always seems so SLOW acting (for the past 5 years)
View 1 Replies View RelatedI want to create a ICO file from a GIF format image. It becomes ugly when I convert it from PSD to GIF, with a transparent background (fig 001.jpg). I want the edge of the circle smoother as it is in PSD file (fig. 002.jpg).
View 9 Replies View Relatedwhen viewing pdfs exported from photoshop cs4 using acrobat pro 9. If I open single pdf, it's ok, but whenever I open another pdf, all text is jagged. Then if I close all pdfs and try opening the second one, it's ok again. It looks like acrobat is not able to render texts correctly in newly opened pdf when another pdf is already opened. This happens only with pdfs exported from photoshop (file->save as->pdf). It does not really matter if the first opened pdf is from photoshop or not, all other opened pdfs from photoshop are crapy. I tried different settings when saving pdf but the results are always the same - jagged type (it does not even look like aliased, it's completely screwed and unreadable) in second pdf. It is funny because text present as smart object from illustrator renders fine all the time. Therefor I think the problem is between photoshop export and acrobat, vectors are rendered with no problems. I tried opening on different pc (also with acrobat 9 pro) with the same result. Systems are vista on exporting pc, the second pc is running windows7 beta. However on the third pc with windows XP and adobe reader 9 everything works fine.
View 2 Replies View RelatedI'm sure this is easy, I just haven't done much in photoshop. I made an easy button usining the polygonal laso tool so the sides could be angled. Can anybody tell me how to get rid of the jagged edges on the sides of my button caused by the tool?
View 7 Replies View Relatedwhat i want to do is get rid of the pixalated looking edges that are formed from making shapes and usinng the pen tool to make shapes. i want nice smooth edges.....
View 9 Replies View RelatedI was playing around with lighting images today by first creating an alpha channel, blurring it and then applying the lighting effects filter to it. For some reason after applying the filter I get jagged edges everywhere. When working with the channel, i did invert the selection and then clear it...
View 2 Replies View RelatedI created a new image 500x500 pixels at 72 pixels per inch resolution. However when I added some text to this image it came out all jagged and of poor quality.
I then created a new image with a resolution of 300 pixels and the text in this came out perfect, however where in the first image the text was about 18pt in the second image I had to drop the text down to about 9 point to be the same size. What resolution hould I be using for web page design and how do I get around the poor quality of lower resolution? I expect some drop in quality but the text at 72 pixels was no where near usable.
Yesterday I needed to design a quick business card for the band that i work for. It's super basic, just the band's logo on the front of the card and their web address on the back. The problem I had was that the curves in the logo were jagged and not smooth; I was only able to smooth the edges by adding a stroke to the logo.
My question is, how do you make curves not look all jagged? This is the version of the card that is being printed so you can see the logo.
to making Gifs, but just took some black text, made bg transparent, changed resolution from 300 to 72. text is huge so have to make it smaller with bicubic resample. but then text looks very jagged and awful,
View 2 Replies View RelatedHow do you get rid of jagged lines in objects and text when you rotate them.
Â
Anti aliasing is checked already and im not stuck on pixel preview.
Â
When i burn a screen it comes out in my image
For some reason all my paths, including old files have become jagged. New paths are coming up jagged as wells as print out and PDF files. Using CS5.Â
Â
I am not an expert but have been using AI for years to make patterns with the pen tool. The smaller I make the illustration the worst it gets.It is not the pixel preview, tried that already.
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
I've been using photoshop for about five years now, but I've just started to get into freehand drawing mainly as a way to hone my skills for my Flash animations. Everything was going fine until I hit a bit of a speedbump. When I start to draw curves by hand, the beginning is always jagged. There will be a straight line that makes a sharp turn and then goes into the ellipse that I want. I turned off smoothing. I'm using a Wacom Bamboo Graphics Tablet, Is there some brush configuration that I should be using to stop this from happening?
View 1 Replies View RelatedI'm working on a logo and I extruded some type. The curving of the font is not correct. Looks squared off a bit. The font is Trajan Pro...Is this because the type is too small? I pasted the logo from Illustrator and converted it to a smart object.
View 5 Replies View Related