3ds Max :: Replacement Of Water Reactor
Jan 26, 2012Create a realistic water animation in 3ds max 2012, is there is a replacement of water reactor.
View 1 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Good Replacement For SAVE Command To Use It Within Reactor?
Nov 17, 2013I need to find a way to find a good replacement for "SAVE" command to use it within Reactor. I want to save A COPY of my current ("active") DWG document to another place *without making it current* (just like command "SAVE" does and did it always). I know I could use (vla-saveAs ...) to save it first to another Folder and then use (vla-save ...) to save it back to its current Folder, but there must be a way to do it simply and fast.
View 9 Replies View RelatedPhotoshop :: Fixing Bright Green Water.. Into Clean Water
Jul 4, 2004I have a pic that has a really pretty view of a bridge over a little stream. Only problem is the water is covered with slimy green algee.
View 5 Replies View RelatedPhotoshop :: Transform Brush Of Water In (water Authentic)?
Mar 7, 2012any tutorial to transform a brush of water, in "water authentic"? Color, brightness, etc .........
View 4 Replies View Related3ds Max :: Make Water Particles To Collide With Water?
Jul 7, 2011I want to make a fountain that has water jets that cause ripples when they hit the water. I have tried the basic reactor water and Pflow setup, as well as super spray, but neither seem to work. Is there any way to accomplish this without "faking" it by doing something creative with the water's texture?
View 9 Replies View Related3ds Max :: Deforming A Sphere Without Reactor
Sep 23, 2011We no longer have Reactor Softbody, so if I wanted a sphere to be dropped on to a table how do I get it to squash and deform as it hits the table (other than doing it manually with a FFD etc)
MassFX would do the basics of that but I can't see how it could deform the mesh?
3ds Max Animation :: Find Reactor In 2012?
Apr 13, 2011i cant find reactor in 3ds max 2012
View 9 Replies View Related3ds Max :: Reactor Toolbar Not Showing The Icons
Jul 11, 2012how do i reset the toolbar?
View 3 Replies View RelatedAutoCAD VB :: Xdata / Reactor Length Of Lines?
Oct 7, 2013I have a lot of lines that I need a length, like in attached file. At this moment I do it with a vba that put fields in all lines.
The problems:
1) fields makes drawing slow to regen or after I modify line.
2) fields not follow lines slopes and position, if I stretch or move one end point of line. Text must be in middle of line.
So I thinking use reactors .
I tried reactor but I don't have much experience in lisp and I am having problems with persistent reactors, after I close file and open again, load lisp. Reactor not continue persistent.
This is a test that I tried. Works only for one line.
(defun print-align-text ( owner reactor lst / sp ep a d )
(setq sp (vlax-curve-getstartpoint line1))
(setq ep (vlax-curve-getendpoint line1))
[Code].....
I have read that is better store data using XData. In VBA I tried construct class module with events, without any success.
3ds Max Animation :: Make 4 Wheel Vehicle Rig Using Carwheel Reactor?
Jan 29, 2011I want to make a 4 wheel vehicle rig using the Carwheel reactor. I want to do this as a means of learning how to use 3ds Max, and have completed many tutorials. I do not want to use plug-ins. It seems nobody uses the Carwheel to any extent. I do not want a simple car rig. I want to use the Carwheel reactor as it was meant to be used. I want to realistically steer and follow terrain with the rig. Am I being realistic? Is it even possible?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Cancel Command With Reactor
Nov 24, 2011It is possible to cancel a command using visual lisp reactors. If this is not there another way I could do that. I tried to use UNDEFINE but it works only with own CAD commands and not with Visual Lisp command.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Detecting The Object Name With A Reactor
Dec 9, 2011i am trying to add a reactor to ddatte command, would like to know which object was being edited, the ename or object name (ssget "P") does not seem to be the one
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Assign Reactor To Object?
Feb 7, 2012I use the following code to assign a reactor to an object.
Now I noticed that if I close the dwg file after you successfully saved, when I open even if I load the lisp, the reactor does not work.
Another problem: when I use the command "erase" or "explode" the reactor is started twice, why? you can run it at once?
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
AutoCAD Visual LISP / AutoLISP :: Detect Dimstyle Change In Reactor?
May 17, 2012I need ot append events when the dimstyle is change using the AutoCAD dimstyle popup list, but don't know which reactoer to use. I tried with Comman begin and end, and Sysvawill change and changed, but they don't detect the dimstyle changes.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Disable Command MOVE On Reactor?
Feb 7, 2012I use the following code to assign a reactor to an object:
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
"reactor_upd" is the name of the function that starts every change or delete the object.
I would like to exclude the command "MOVE", ie if I move the object, I do not want that part to the"reactor_upd" function.
AutoCAD Visual LISP / AutoLISP :: Redefine Block Inside Reactor
Dec 4, 2012I have the following code to redefine a block after a command has ended:
(vl-load-com);*********************************************************(defun Redefine() (command "_.INSERT" "reactortest=reactortest" nil)(princ "Block redefined."));****************************************(vlr-command-reactor nil '((:vlr-commandEnded . endCommand)));******************************************************(defun endCommand (calling-reactor endcommandInfo / thecommandend) ; Get the name of the command.(setq thecommandend (nth 0 endcommandInfo)); Check name of the command.(cond ((= thecommandend "PLINE") (Redefine)));cond(princ));defun(princ)
It doesn't work because INSERT is an interactive function and can't be called while a reactor is active. Is there another way to redefine a block that can be used in a reactor? The block is in one of the default search path's.
AutoCAD Visual LISP / AutoLISP :: Check If An Object Already Has A Reactor Connected
Mar 30, 2012how can I check whether an object has a reactor connected?
I wrote the following
(defun c:**** (/ ogg collegaReactor) (setq ogg (car (entsel))) (setq collegaReactor (vlr-object-reactor (list (vlax-ename->vla-object ogg)) "NOMEAPP" '( (:vlr-modified . testedit) (:vlr-objectClosed . endedit) ) ) ))(defun testedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "testedit"))(defun endedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "endedit"))
If I start two or three or more times the "c:****" and select the same object, when I changethe "alert" appear several times.
AutoCAD Visual LISP / AutoLISP :: Object Reactor And Load Function LSP
Mar 13, 2012I open the drawing without loading the function, when I modify an object with the reactors appears the following error message:
function definition: NAMEFUNCTION
You can avoid this annoying message without removing the persistent reactors?
AutoCAD Visual LISP / AutoLISP :: Reactor Triggers Fatal Error
Jun 15, 2012I have created a very basic reactor as a test. As you can see, it doesn't actually do anything other than set a variable so I know the error isn't caused by something I'm doing with the reactor.
(defun np:test (reactor callbackdata / ) (setq abc 123))(if (not np:reactor1) (setq np:reactor1 (vlr-command-reactor nil '((:vlr-commandwillstart . np:test))) ))
OK, so the problem I have found is that if I load this reactor into a drawing and then use the MVSETUP command but escape out without completing the command, AutoCAD throws an error and becomes unusable. When I then close AutoCAD down I am met with multiple unhandled exception errors before the app finally closes.
I then altered the reactor from a vlr-command-reactor to a vlr-editor-reactor and found that with this, I am no longer met with the same error while escaping out of MVSETUP. However, when I close CAD down I am eventually left with an 'AutoCAD Application has stopped working' error dialog on screen which reports that acad.exe as crashed.
I am working on AutoCAD Architecture 2012 (although I have tried it on 2013 to with the same results) on Windows 7 64bit. I have also tried this on ACA2012 x32 and found the same error exists.
I am doing something fundamentally wrong in the way I am handling reactors?
AutoCAD Visual LISP / AutoLISP :: Object Reactor Owner Size Limitation?
Dec 28, 2011Does Object Reactor has an owner size limitation?
when the owner size is big (about 1000) trying to disable the reactor (vlr-remove ReactorObj) causes AutoCAD to crash right on spot.
AutoCAD Visual LISP / AutoLISP :: Reactor - How To Change Xdata Length If Line Is Modified
May 18, 2010I need a Reactor to Modify Xdata - Length - contained in Line Object if this Line is modified (stretched, breaked, trimmed, etc).The routine need to verify if Line contain Xdata and modify it (and works with multiple selection).
I tried for long hours, but without success. I tried to create a list of entities while the reactor is applied, but doing so need another reactor to change these entities after the first Reactor works.The codes I used are below:
{code}
;If it just 1 string only you want to add
(defun add_xdata_str (e a v);;;EName APPID String_value
(and (not (tblsearch "APPID" a))
(regapp a))
(and (= (type e) 'ENAME)
[code]....
Photoshop :: RGB Value Replacement
Aug 27, 2003I have a PS (7.0) layer and want to replace speicfic RGB values with a nother RGB value. For example replace RGB (220,220,220) with RGB (125,135,145). I am trying to create an action to automate this process for multiple PSD.files (approx 50) that need the same RGB value conversion. I tried using the "replace color" but this defined an area to modify not a specific RGB value.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Xref Reactor Object ID To Xref Name
Oct 2, 2012I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
Photoshop :: Face Replacement In CS6
Jun 28, 2013I've seen some stunning "face replacements". I just can't get the textures of the two source photo's to match perfectly. For instance a coarse photo from a newspaper and a high res photo. I use PS CS6.
View 2 Replies View RelatedPhotoshop :: Photomatix Replacement
Apr 15, 2009i want to make some hdr photos but can't afford photomatix. is there any freeware or replacement to get the same end result?
View 3 Replies View RelatedPhotoshop :: Color Replacement
Aug 11, 2007I been trying to change the color on this car to black. I changed the color on the car by trial and error, but not to black.
View 2 Replies View RelatedPhotoshop :: Color Replacement
Sep 25, 2006I have an image in which I am trying to replace the black coloring in a flag to pink, but the replacement isn't going through. The flag only becomes a greyish color.
To replace the color I used Image--->Adjustments--->Replace Color and then selected the black with the eyedropper, and change the color on the bottom to the pink.
Photoshop :: Color Replacement From B&w
Dec 9, 2005I need to change a solid black shape to a brown color, but the color replacement can't change b&w to actual colors right?
Well I know I could select it and just fill it, but it gets too pixelated; the edges on the shape are a little feathered.
When I do the color replacement tool the value changes nicley, but why can't the color change also...is there any method that can change this black shape to brown without having to cleanup the edges?
Photoshop :: Replacement Copy
Aug 2, 2008I cannot find my copy of CS2 to install on new machine. It was actually an upgrade from CS that I had downloaded...somewhere...I called Adobe and was told they cannot supply a replacementI would need to upgrade to CS3 (which I'm not interested in at the moment). I find this hard to believe...have I been informed correctly? Any ideas how to obtain a replacement (not interested in cracks, btw)?
OR can someone tell me the exact filename of the original download so I can refine my search on my old PC?
Photoshop :: Pattern Replacement
Nov 21, 2008I have a few photos of some models dressing in solid color outfits. I would like to add patterns in place of the solid colors. Is there a quick method or auto action, that allows you to do this?
If so, what version of Photoshop?
Photoshop :: Using Color Replacement Tool In CS6?
Sep 5, 2013Using the Color Replacement Tool in CS6:
what the sampling continuous option does?