AutoCAD Visual LISP / AutoLISP :: Detecting The Object Name With A Reactor
Dec 9, 2011
i am trying to add a reactor to ddatte command, would like to know which object was being edited, the ename or object name (ssget "P") does not seem to be the one
View 5 Replies
ADVERTISEMENT
Feb 7, 2012
I use the following code to assign a reactor to an object.
Now I noticed that if I close the dwg file after you successfully saved, when I open even if I load the lisp, the reactor does not work.
Another problem: when I use the command "erase" or "explode" the reactor is started twice, why? you can run it at once?
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
View 3 Replies
View Related
Mar 30, 2012
how can I check whether an object has a reactor connected?
I wrote the following
(defun c:**** (/ ogg collegaReactor) (setq ogg (car (entsel))) (setq collegaReactor (vlr-object-reactor (list (vlax-ename->vla-object ogg)) "NOMEAPP" '( (:vlr-modified . testedit) (:vlr-objectClosed . endedit) ) ) ))(defun testedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "testedit"))(defun endedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "endedit"))
If I start two or three or more times the "c:****" and select the same object, when I changethe "alert" appear several times.
View 8 Replies
View Related
Mar 13, 2012
I open the drawing without loading the function, when I modify an object with the reactors appears the following error message:
function definition: NAMEFUNCTION
You can avoid this annoying message without removing the persistent reactors?
View 3 Replies
View Related
Dec 28, 2011
Does Object Reactor has an owner size limitation?
when the owner size is big (about 1000) trying to disable the reactor (vlr-remove ReactorObj) causes AutoCAD to crash right on spot.
View 5 Replies
View Related
Oct 2, 2012
I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Nov 24, 2011
It is possible to cancel a command using visual lisp reactors. If this is not there another way I could do that. I tried to use UNDEFINE but it works only with own CAD commands and not with Visual Lisp command.
View 1 Replies
View Related
May 17, 2012
I need ot append events when the dimstyle is change using the AutoCAD dimstyle popup list, but don't know which reactoer to use. I tried with Comman begin and end, and Sysvawill change and changed, but they don't detect the dimstyle changes.
View 2 Replies
View Related
Feb 7, 2012
I use the following code to assign a reactor to an object:
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
"reactor_upd" is the name of the function that starts every change or delete the object.
I would like to exclude the command "MOVE", ie if I move the object, I do not want that part to the"reactor_upd" function.
View 2 Replies
View Related
Dec 4, 2012
I have the following code to redefine a block after a command has ended:
(vl-load-com);*********************************************************(defun Redefine() (command "_.INSERT" "reactortest=reactortest" nil)(princ "Block redefined."));****************************************(vlr-command-reactor nil '((:vlr-commandEnded . endCommand)));******************************************************(defun endCommand (calling-reactor endcommandInfo / thecommandend) ; Get the name of the command.(setq thecommandend (nth 0 endcommandInfo)); Check name of the command.(cond ((= thecommandend "PLINE") (Redefine)));cond(princ));defun(princ)
It doesn't work because INSERT is an interactive function and can't be called while a reactor is active. Is there another way to redefine a block that can be used in a reactor? The block is in one of the default search path's.
View 2 Replies
View Related
Jun 15, 2012
I have created a very basic reactor as a test. As you can see, it doesn't actually do anything other than set a variable so I know the error isn't caused by something I'm doing with the reactor.
(defun np:test (reactor callbackdata / ) (setq abc 123))(if (not np:reactor1) (setq np:reactor1 (vlr-command-reactor nil '((:vlr-commandwillstart . np:test))) ))
OK, so the problem I have found is that if I load this reactor into a drawing and then use the MVSETUP command but escape out without completing the command, AutoCAD throws an error and becomes unusable. When I then close AutoCAD down I am met with multiple unhandled exception errors before the app finally closes.
I then altered the reactor from a vlr-command-reactor to a vlr-editor-reactor and found that with this, I am no longer met with the same error while escaping out of MVSETUP. However, when I close CAD down I am eventually left with an 'AutoCAD Application has stopped working' error dialog on screen which reports that acad.exe as crashed.
I am working on AutoCAD Architecture 2012 (although I have tried it on 2013 to with the same results) on Windows 7 64bit. I have also tried this on ACA2012 x32 and found the same error exists.
I am doing something fundamentally wrong in the way I am handling reactors?
View 9 Replies
View Related
Nov 17, 2013
I need to find a way to find a good replacement for "SAVE" command to use it within Reactor. I want to save A COPY of my current ("active") DWG document to another place *without making it current* (just like command "SAVE" does and did it always). I know I could use (vla-saveAs ...) to save it first to another Folder and then use (vla-save ...) to save it back to its current Folder, but there must be a way to do it simply and fast.
View 9 Replies
View Related
May 18, 2010
I need a Reactor to Modify Xdata - Length - contained in Line Object if this Line is modified (stretched, breaked, trimmed, etc).The routine need to verify if Line contain Xdata and modify it (and works with multiple selection).
I tried for long hours, but without success. I tried to create a list of entities while the reactor is applied, but doing so need another reactor to change these entities after the first Reactor works.The codes I used are below:
{code}
;If it just 1 string only you want to add
(defun add_xdata_str (e a v);;;EName APPID String_value
(and (not (tblsearch "APPID" a))
(regapp a))
(and (= (type e) 'ENAME)
[code]....
View 6 Replies
View Related
Aug 29, 2011
I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
View 4 Replies
View Related
Feb 21, 2013
I need to get VLA-Object from block name.
here there is a code to get block name from VLA-Object:
(vlax-get-property obj (if (vlax-property-available-p obj 'EffectiveName) 'EffectiveName 'Name) )
but I need the inverse of this code exactly:
blockname(as a string)==>VLA-object
(defun GetVLA_BName (BName).......
so, how can I do it?
View 9 Replies
View Related
Mar 15, 2013
I am trying to write a simple (or at least I thought it was) code to flatten a 3d object into a 2d shape. For some reason after ACAD runs the lisp it recognizes the flatten command but it will not select all. this is what I have:
(defun c:fl () (command "flatten" "all") )
I have even tried the pick first command, to select all then run the flatten command but that still doesn't work.
View 5 Replies
View Related
Jun 19, 2013
How to access the information stored with an AcDbScale object using Visual Lisp. I can convert the vla-object to an ename and then use association codes to extract the data, but surely there's an easier, more direct alternative.
View 9 Replies
View Related
Jun 24, 2012
How to fade an object (block) in and out?
View 2 Replies
View Related
Nov 10, 2011
I am looking for a lisp routine which will allow me to mirror an object that I pick automatically. I don't want to have to pick the two points to set the mirror line. I just want the point I pick on of the object I select to be the point of the mirror. If that can't happen, I was wondering if the object could mirror at its insertion point (like if it were a block or a text.
View 7 Replies
View Related
Nov 1, 2011
We use multi-leader objects in our drawings. When the multi-leader and its value are to be replicated throughout the drawing, we create mleaders with fields that show the contents of the first mleader. That way we can update only the value in the first mleader and all of its children will update as well. It works nicely for us.
Here comes one snag. If one of us opens a drawing with which we are not intimately familiar, we don't know which mleader is the parent of which children. There might be fifty parents and four hundred children in a drawing so going through them by hand is a big productivity drain.
What I need to do is write a routine that will let the user select the mleader that includes the field and have the routine highlight and/or zoom to the parent object.
I thought I should be able to find that info in the dxf codes for the mleader, but I am either missing it or it's not there.
View 3 Replies
View Related
Nov 12, 2013
I am creating a line using entmake, but I need the start and end point to be variable that was already defined ex.
(entmake '((0 . "LINE")(8 . "FIELD") (10 . line_insert) (11 line_end)))
Command: !line_insert
(29.2813 20.5 0.0)
Command: !line_end
(29.2813 18.5 0.0)
The error I get is
; error: bad DXF group: (10 LINE_INSERT)
What do I do to make it recognize this variable?
View 1 Replies
View Related
Jun 14, 2013
I have this lisp which will display the height of a 3D object to 2 dps. What I need is for 3dps to be displayed but I have no real understanding of LISP coidng so I can't work out where this is specified in the routine.
Why this LISP does not work when I try to use it in a drawing which has a Pointools POD file working (or previously had one) within it?
View 5 Replies
View Related
Dec 14, 2011
how to do this programmatically and without modifying the handle of the object,i am trying to do it programmatically (entmod (cons 410 newname)(assoc 410 ... no luck.
(entmakex -ing will modify or create a new handle ctrl-X and then ctrl-V recreates a new handle too ...
View 9 Replies
View Related
Jan 29, 2013
I need to write some code to count blocks inserted on the drawing.... I want to count also dynamic blocks... most of the time dynamic blocks are anonymous... so I'd need to check the Effective Name.
This line gets the blocks in the block table...
... but how do I get the blocks actually inserted in the dwg?
(setq blks (vla-get-blocks odoc))
Will a regular lisp expressions (like below) work with ObjectDBX... (drawing file not open)?
(setq ss (ssget "X" (list (cons 0 "INSERT")(cons 2 "`*U*"))))
View 2 Replies
View Related
Nov 23, 2011
I've gotten these two routines from different threads on here. One works with *text and blocks. The second works with multileaders.
I'd like to merge the two so one command can work with a selection set of any of the above objects (assume selection set of mixed objects - some multileaders, some text, some blocks)
(defun c:at ( / ss ang *error*)(vl-load-com)(ErrorHandler '("cmdecho" "osmode"))(setvar "cmdecho" 0)(setvar "osmode" 576)(setqss (ssget '((0 . "*TEXT,INSERT")))ang (getangle "
Select two points along desired alignment:"))(mapcar'(lambda (x)(vla-put-rotation(vlax-ename->vla-object x)ang))(mapcar 'cadr (ssnamex ss)))(*error* nil))(defun c:test (/ ss ang i sset)(vl-load-com); Tharwat 17. 05. 2011 (if (and (setq ss (ssget ":L" '((0 . "MULTILEADER")))) (setq ang (getangle "
Specify Rotation Angle :"))) (repeat(setq i (sslength ss)) (setq sset (ssname ss (setq i (1- i)))) (vla-put-TextRotation (vlax-ename->vla-object sset) ang)) (princ)) (princ))
Or see C:AT and C:TEST in the attached file
View 2 Replies
View Related
Jun 20, 2011
A lot of the LISP routines we use turn off all snaps except the "nearest" snap when the routine is complete.
I draw with 6 out of the 10 snaps on (not the nearest).
LISP routine that loads specific object snaps?
View 9 Replies
View Related
Jan 3, 2013
LISP routine which will draw lines from the center/insertion point of multiple objects to 0,0,0 ?
View 9 Replies
View Related
Jul 21, 2003
Is there a lisp routine to draw 3D object by the LOFT way ? .
View 4 Replies
View Related
Aug 6, 2013
I discovered yesterday my burst lisp routine isn't working. It gives the following error message:
bad argument type: VLA-object collection: #<VLA-OBJECT 0971e1d4>
The routine does not appear to have changed. But here is the
(Defun C:BURST (/ item bitset bump att-text lastent burst-one burst BCNT BLAYER BCOLOR ELAST BLTYPE ETYPE PSFLAG ENAME ) ;----------------------------------------------------- ; Item from association list ;----------------------------------------------------- (Defun ITEM (N E) (CDR (Assoc N E))) ;----------------------------------------------------- ; Error Handler ;----------------------------------------------------- (acet-error-init (list (list "cmdecho" 0 "highlight" 1 ) T ;flag. True means use undo for error clean up. );list );acet-error-init ;----------------------------------------------------- ; BIT SET ;----------------------------------------------------- (Defun BITSET (A B) (= (Boole 1 A B) B)) ;----------------------------------------------------- ; BUMP ;----------------------------------------------------- (Setq bcnt 0) (Defun bump (prmpt) (Princ (Nth bcnt '("
-" "
\" "
[code]....
View 6 Replies
View Related
Nov 11, 2013
This is in regards to the LIP command in Toolpac. The layer properties for a selected nested object (LIP) used to default to nested. Now you have to select nested from the list of options. Why they would change LIP. My whole company had gotten so used to it.
View 4 Replies
View Related
Jan 1, 2014
I am trying to extrude an object in the negative Z direction.
Easy to do at the command line by putting a "-" sign before the distance to extrude the object but I'm having trouble in autolisp.
Define points for polyline for valence
(setq p1v p1)
(setq p2v (polar p1 (DTR 0.0) box_width))
(setq p3v (polar p2v (DTR 90.0) val_thick))
(setq p4v (polar p1V (DTR 90.0) val_thick))
;-- Create valence polyline
;-- Draw the polyline for the valence
(command "pline" p1v p2v p3v p4v "c")
;-- Assign the new part a variable name
(setq cab_valpl (entlast))
THIS IS THE PART I'M TRYING TO FIGURE OUT BELOW ....... WHAT IS THE SYNTAX TO EXTRUDE "VAL_HT" IN THE NEGATIVE DIRECTION?
;-- Extrude the polyline to make the valence
(command "extrude" cab_valpl "" val_ht "0")
View 6 Replies
View Related