I have a psd file that apparently has an unsupported color scheme (not rgb or hex) for WD7. How can I open and work with this file? Its 3MB and I want to create a smaller web friendly image that fits my site header area.
View 2 Replies
I am a software developer. I've spent a lot of time in the last few years building crazy GUIs for a simulation product. I had previously discovered Xara Xtreme for doing software design illustrations and other documentation, so I decided to try using it for making icons and graphics for GUIs. We had some pretty old graphics in our system from 15 years ago, so the bar was pretty low. I was able to teach myself some basic techniques and I think I did a fair job at tremendously improving our graphics. We have artists, but they are generally doing 3D models for the simulator, not GUI graphics.
Anyway, I was very impressed with what even a motivated but untrained programmer could do with Xara. Constantly having to export bitmaps was a bit of a pain, though. What I really wanted was to be able to draw the graphics I had designed in Xara directly in my software, and I wanted to do it on the mac.
There was many a stumbling block, but I managed to be able to draw all of the geometry correctly and I have also implemented solid and linear fills. No shadows, contours, bitmaps, molds, text, effects, etc. I got frustrated with Quartz because it could not render every fill case. I also got frustrated with the Xara spec that was obviously out of date and had many omissions in it.
My initial goal was to write a card game that used vector graphic cards in Xara format. My renderer can actually draw everything I need for decent looking but basic card designs, but I wanted to round out the feature set a bit more and support more effects like edge feathering, more fills, shadows, text, etc. I did one drawing of a court card from a pack of Bicycle Cards, and then I did some research on playing card artwork and bought a pretty old deck of cards with some of the original designs that modern cards are based on. I did one drawing from that deck as well. As I understand it, as long as I don't copy the back, the Ace of Spades, or the Joker designs I'm ok from a copyright perspective. These cards are so old they are probably beyond copyright anyway. Furthermore, the printing techniques back then were so imprecise that my end result is more of an interpretation of the original than a copy.
I get an error message saying Lightroom doesn't recognise the .CR2 RAW file format.
View 7 Replies View RelatedI tried to do it according to the instructions in the help menu, however PSE 11 does not even recognize the file format.
View 2 Replies View RelatedI want to edit my eurotruck simulator skins, they are dds files, Xara X says it is not a supported file.
View 7 Replies View RelatedI am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedPhotoshop Touch psdx format file will not open in Photoshop CC (file format not recognised) but opens fine in CS6
View 14 Replies View RelatedPhotoshop Touch psdx format file will not open in Photoshop CC (file format not recognised) but opens fine in CS6
View 1 Replies View RelatedIn VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
View 9 Replies View RelatedThis is driving me up the wall, I have pro X4 on my laptop and computer, I can't edit on my laptop as it lags, maybe Corel is too big for my laptop I don't know. On my laptop it allows me to import AVI. files, however, when it comes to my PC, it doesn't.It doesn't make sense how I CAN on my laptop but CAN'T on my pc, It did used to work fine on my pc when I had X2, but towards the end it started making the same error message
'Unable to open file [N:GFFILE309.AVI]. File mismatch'
I'm losing my temper, converting the files isn't an option as it makes my HD footage look like crap and pixilised, it also takes forever. I am at a dead end, I have installed the Corel Videostudio pro x4 codec and that hasn't worked at all.
Strange intermittent issue on Mac, 10.6, CS4. what happens to standard image files that makes them so PS cannot open them?
View 1 Replies View RelatedCircumstance: Using VSPX3, how to combine multiple VSP files in a single movie using "insert media file into timeline" command on File menu?
Each VSP file represents different segments of movie. Each VSP file has items on Overlay track, title track, Music track, as well as transitions.
Each VSP file can be loaded using "Open Project" command under File menu.
Problem: VSPX3 displays error message "Unable to open file" "file format mismatch" [16803:1:2]
Is it possible to open a Photoshop .ESP file in Xara Designer PRO X (v8.1.3)?
e.g. When I open an .EPS using file Open (Filetype=All files), Xara goest through the motions of opening it but when you look there is nothing inside the file!
e.g. If I try to IMPORT the .EPS file (which fwiw, is a very small simple file...) it fails too.
While working on a drawing the file would not save (message - failed to save), then Xara DP7 crashed. The file disapeared from my hard drive. I restored the file with a utility. Now when I try to open file it says - Failed to read XAR file, Failed to read record buffer.
View 4 Replies View RelatedI got a .CIN file from a student friend and I was looking for an application that opens this kind of files, so I was looking on the internet and I found out that Adobe Photoshop CS 6 opens them. I installed the trial version and I tried to open the file but it keeps telling me "Could not complete your request because the file-format module cannot parse the file for CIN file".
[URL]
When I double click a file, it launches photoshop but doesn't open the file. I can only open by selecting file>open from the menu.
It used to launch and open files automatically but has recently stopped... any ideas? what have I done?
We have an iMac workstation here running Premiere that will not open projects or import clips. Here's the sequence of events that led to this:
1. Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle". I tried trashing preferences and launching with plug-ins disabled and received the same freeze. Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package. The software launched fine - but none of the Quicktime files in the project were working. So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder. Since then - launching the software has generated the below errors.
2. Attempting to open any project gives a long error that starts as: The preset used by one or more sequences in this project requires third-party components that could not be located.
3. Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error: File Format not supported.
I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2. None of which fixed the issue.
I'm thinking about trying a complete re-install of Premiere next.
Here's the details:
Premiere Pro CC 7.2
Mac OS 10.8.5
iMac late 2012 model, 32Gb RAM, 2Gb video card
I use Xara Xtreme Pro 3, and when I open a pdf file for editing, the color gradients don't show up. They are definitely there in the pdf file (I can see them in Adobe Reader) but Xara doesn't seem to display them.
Let me know if I can upload images, pdfs, more info, etc
When I turn on my compagny computer everything is alright. Photoshop CS6 13.0 x32 start correctly. I can work on picture as expected.But during the day, Photoshop doesn't want to open other file (any other file).I can continue to work on a picture that still open and can save it, but I can not open anything else.
Restart Photoshop doesn't work. I must reboot the computer to correct this and open other file.I'm on windows 7 SP1 with administrator rights..No plugin installed.
The file autocad 2010 (dwg) that I've been working for ages doesn't open. It starts loading but then get stuk on 96%. I tried to recover it and no errors are detected.
View 9 Replies View RelatedI've just started a new job, and I'm on a PC with CS6. (I'm used to Mac, CS5)
I can't seem to get 'open recent file' to work in any of my CS6 programes It is always greyed out and never remembers what I've last done. Does it have something to do with the files being stored on a passworded server?
When I open my illustrator file after working in CC, it won't open. I keep getting an error saying "could not read file because the plug-in could not understand this file."
View 1 Replies View Relatedwhen i open or import it ,then that shows me "Read error" i can open it again.and it has large size, so i cant attach here....
View 3 Replies View RelatedI have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View RelatedI have Windows XP/Pro with SP3. In File Options > File Types I have JPG set to open up in Photoshop CS4; alas, when JPG files are either in Outlook as attachments or on the desktop, nothing happens when I double click them. My workaround is to drag the file icon into CS4, and this only works from the desktop, not from Outlook.
View 2 Replies View RelatedWhen I try to open files - ANY files - I get an error message that AI doesn't recognize the file type. I tried importing files and received the same message. I then went back and attempted to open files that I had created with AI. NO FILES will open. I tried re-installing the program, still no dice.
View 16 Replies View RelatedI am having trouble with my AutoCad Civil 2013. If I want to open or save an existing file the program only allows me to input the file name in the command line. It does not open a browsing window to select the file path I want to save or open to.
View 2 Replies View RelatedWhen press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
What can i do to get the "open"-window?
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
I am trialing the DG&P of xara. I am creating embroidery files in another software. I need to import in .emf. Most of my clipart, etc that I use is jpeg or png. I am wanting to take those into a program, create the vector file, and import to the embroidery software so that I can manipulate/simplify how I need to to create the stitch out. So, when I am in xara and I bring the image in, I select all and choose export in the .emf format....I figured that out. But, when I bring it into the other software I have a blank page. So, I figure I am missing something. Is there a quick way to convert the outline I bring in (in png) to vectors so that it can export and be manipulated in the other software in .emf? or do I trace the file in xara as I would in the other software, have a rough sketch, and then export? Where is the best info on what to do? I am pretty good at following tutorials and lessons but before I buy I just want to make sure it does what I am wanting it to do.
View 9 Replies View Related
