I just got PGD7 and watched the movies etc an still can not cut the heads off one person and put them on another ! It is to simple or beyond my level ? Directions on free hand cutting parts out of one picture and adding them to another ?
View 4 RepliesI am putting together a slideshow for my son's high school graduation and I've scanned lots of old photos (as JPEGs) into my computer. They are, of course, all different sizes and my question is what size or ratio do I use when I crop/resize them in Photoshop so that they will be uniform and the right size for a slide show?
View 1 Replies View RelatedUsing Elements 9 when cropping photos to add to a slideshow do I need to crop a "custom" size to enable the slideshow to be later added to a DVD on Windows Movie Maker and played on a wiescreen TV or can I just choose "no restriction" and then specify DVD Aspect ratio of 16.9 when creating the DVD?
View 2 Replies View Relatedsee attached picture, is it possible to trim the parts of the curve that go beyond the shape? In a CAD programme you can just trim these away and join whats left to form your shape.
By the way i am trying out the trial of Autodesk sketch book designer, (not to be confused with sketchbook pro). it has vector graphics in it and has some neat ideas xara could benefit from. Check out the video, i like the direct transformable fills. also the way lines are handled.
[URL]
Question about Xara Extreme 5. When I click on an object, there are a bunch of square dots around the outsite. When I use the pencil tool to go from one dot to another dot, waiting for the ~ to appear, Xara "sometimes" removes the "little" piece I am trying to remove... but other times, removes 90% of the object, keeping the tiny piece of the image (I am trying to remove). Is there a trick or shortcut so that Xara ALWAYS removes the smaller section? I thought that it would be, if you are selecting a piece (i.e. 10% of the selected image), it would remove it... but nope, sometimes it keeps the 10% and removes the 90%. Very frustrating and obviously I do not understand the use of this tool.
View 9 Replies View RelatedBeen using Xara Xtreme Pro 5 for several years and this is an issue that happens now. Parts of lines disappear in a drawing at different zoom levels. The drawing might look perfect at one zoom level, but if I zoom in from say 100% to 500% parts of lines disappear from the drawing. The fix is usually having to click on the line or zoom to a different %. I have attached a picture to show the issue. The hat on the left shows the missing part of the line (circled in red), and the hat on the right shows how the line actually is.
If this was happening in a pc game I would describe it as clipping. I'm on a Pentium 4 PC 3 GHz, Win XP SP 3 2 gigs of RAM. GeForce 6200 if this comes into play .
I'm trying to take parts of 2 photos and combine them into one using Elements 11. I havene't found any instructions on how to do this.
View 6 Replies View Relatedway to further clean up or enhance the attached image. It is my Grandparents wedding photo which my Father asked if I could clean up.
I have mainly used the magic erase tool to remove spots. I have tried some live effects but lose some definition especially in the faces.
Can photos with mismatched hues be corrected with P&GD6? Putting together a 'family photo' but family members are far-flung, so can't be in one place, so I have received photos of everyone. I want to trim and combine photos into one picture, but skin tones do not match. They were take under varying light conditions. (clothing colors aren't important)
View 5 Replies View RelatedIs it possible and how to print photos without raster with Xara Designer Pro 7?
I am desperate because I need a printout with no raster but I can get it.
I'm very new to Xara Web Design (I have version 9). I'm trying to wrap the text around my photos. The 'help' file advises to repel text under and/or repel and anchor. I have tried both options and my photo just lands in the middle of the text. The tutorial just says to use the 'select' arrow and move the photo around and the text will form around it. No go....what am I doing wrong????
View 1 Replies View Relatedimporting photos into Xara 7 - the photos have a "green" sheen to them - I've only noticed as I've been using xara to print out some photos for a friend who's printer died. he uses powerpoint to print his and the difference between the two is really marked! i'm assuming it's due to CMYK/RGB differences (ppt is RGB) but I can't for the life me see where I can alter the Xara settings so the photos come in as per ppt.
View 8 Replies View RelatedWhen I import, or drag and drop, photos they are reduced to 400x300 pixels even I chose "Import as original, which was 3445x2584. So, when export the image back as a JPG all I get is the reduced image. how can I keep my original image size?
View 3 Replies View RelatedI am updating a customers website now and have added a couple of items to a page and I now receive a pop up error - OUT OF MEMORY.I have optimized the photos and saved/closed/restarted but still not removing the error -
View 9 Replies View RelatedI've just started using Xara to edit my photos. I have a problem I can�t solve: how can I export the edited photos with 72 dpi and 843*403 pixels;or 72 dpi and 404*404 pixels?
View 9 Replies View RelatedI am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.Â
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VPÂ bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View Relatedwhy can't i get my executed crops to save?
View 5 Replies View RelatedI just got Photoshop CS4 (Design Suite Standard) last week after having used Elements (2, then 3) for the last five years. In Elements, when you use the crop tool, you can move the entire frame around by clicking on the dot in the center and moving it. It seems that in CS4, when I attempt to move the frame, only the center dot moves without moving the frame lines. I looked through the PDF manual, but couldn't find any explanation how to change this. I'll likely be back with more questions as I try to learn how to use CS4.
View 2 Replies View RelatedI want to scientifically crop 2 pixels away from an image. The image is not square but the crop will be. Is there a handy tool to do that?
View 1 Replies View RelatedI select the area to be cropped on the image.
Select "image>crop" and enter.
The picture disappears.
I had this happen with CS3 once; it was suggested to reinstall;
This time I have reinstalled PS CS4 twice (uninstalled first) and it still does this.
My PS CS3 was a separate PS package; the CS4 is part of the Adobe Creative Suite 4 (standard). The second reinstall, I reinstalled the whole Creative Suite. Still does the disappearing act.
I go to crop or use the marquee tool(such as to make a border, when I put the cursor where I want it and left click to start cropping(for example) very often the cropping lines just do not stay where I want them...they go all over the place. This happens with both tools...
View 8 Replies View RelatedI am having problem to crop using ratio instead of values of inches or pixels. In cs2 if i enter any values eg. 6 in width and 4 in height w/out specifying the unit it will use that value as ration instead, in this case 6:4. No resolution as i dont want to resample.
But when i tried this in cs3 it will use the value and i will get a 6 by 4 inches image instead of ratio.