What I'm trying to accomplish is to have an animated blog title. As an example, please have a look at the header of this blog of mine:
[URL].......
As you can see, the header is rather boring. What I'm trying to accomplish is to animate the letters of the header title "Heartgard For Dogs" the one at the very top in yellow.
I have "Xara 3D Maker 7" and "Xara Designer Pro 6".
Not sure which one will accomplish what I'm trying to do.
I know how to change the run time of the entire animated title clip, but how can I extend the end of the finished animation so that just the completed titles viewing time is extended? VS pro X5. Titles
View 8 Replies View RelatedI've tried searching, but haven't been able to find any straight-forward instructions for creating a simple animated gif.
View 9 Replies View RelatedI noticed that animated gif that I put into other web builders load fine, show cleanly.Yet when put into XDP6, the same graphics get a ghosting effect.In other words, after letters have cleared the screen, a remaining unintended outline remains. The graphics are clean in previews, viewing directly, using other web builders, or on other sites built with other software.
Today I visited the New Features page for X3D7 and had the same issue with the gif on that page too. (attached screenshot for reference)I am using win7/64bit, 8gb ram, hi-speed internet connection, don't have anything set in the browser and no browser "helper" that is adjusting image quality. This problem is only seen in Internet Explorer, not Firefox.Is there a setting in XDP that needs to be adjusted so this doesn't happen?
Are there any plans to have Xara products export to APNG (animated PNG) which may replace animated GIF format since Firefox will be supporting it?
View 1 Replies View RelatedI have been trying out Xara 3D - great programme.
I create my first animated image and set it to loop the animation 99 times
If I go away from the web page I put it on and come back (before it could have done 99 loops) it seems to freeze, and refreshing the page does nothing to re-animate it.
It's here at [link removed] in the top right hand corner
What might be stopping the animation and how do I fix it?
How do I Upload a Zoomify Image to my Blog? I have a panorama that I exported to Zoomify. I am stuck now trying to figure out how I can upload that image to my Blog.
View 4 Replies View RelatedI have a .jpg image 610kb which almost but not quite loads. What do I change?
View 2 Replies View RelatedMy friends and I have a blog and we use a very nice background (see the attachments). However, we would like to customize the blog a little bit, I would like you to make a background image which has the exact same size and the one attached. Moreover, the background of the background (!!) must have the same color as the one in the attached image.
Most importantly, try to make something that is about the same as the one attached, but use your imagination to make it different and better. Try the use the same colors and keep it grunge, just the like the attached image.
I know that I ask you to make about the same image. My friends and I really like it, yet we want something different so that our blog is more...unique.
The image file size should not be more than 175KB.
Image dimensions: 1400x920
I would like to create a header for my blog and my website. Can anyone help me with the process....in easy terms?
View 5 Replies View RelatedI want to optimize the images in my blog posts since it is loading very slowly. Due to this my blogs loading speed is very high. I have no idea to optimize the images in Photoshop. You can see my images loading very slowly here
[URL]........
I want to create a simple yet better logo for my blog, JatinSharma.in . So, how I could improve it more.
View 1 Replies View RelatedI wanting to fade all four edges on some photos for a blog header. When I select the photo and apply the fade edge to it, it will only fade on one side, either left or right. What has me confused is I am using the tool the same way I always have but all of a sudden its not working the way it used to.
View 7 Replies View RelatedIs there an easy way to export a web gallery developed in Lightroom 4 into my blogger blog?
View 1 Replies View Relatedi have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 Replies View RelatedI added a title to my movie but the title is showing up on random clips now.
View 1 Replies View RelatedAny method when in the Library module to quickly edit the Title and Caption per image without having to use the mouse to click in the Title box each time. For instance - my current workflow is a bunch of products with their own SKU titles. Usually I would follow this step:
1. Import images from Camera -> Lightroom
2. Open Library and click on first image, select the Title field and enter the SKU (for instance : HG4356)
3. Now I would click in Title and type in "PROFILE" or "TOP" or "SIDE"
4. I would then use the right hand key on the keyboard to move to the next image in my filmstrip and then have to use the mouse to click into the Title field again.
5. Once all these images are completey named, I select them all and then select Library -> Rename Photos and use the Title_Caption as my fields and rename all my files to the correct SKU names.
I can usually automate option 3 somewhat by selecting all the PROFILE views and doing a sync etc... but the SKU section gets a bit tedious when having to mouse click each time into the field. Ideally, I would like a "Naming" feature where it asks for the name, upon typing it in and pressing enter, it jumps to the next image, into the same field and you can start typing again.
I know its sounds a bit lazy - but when you have over a 1000+ images to rename - it does take its time - and anything to speed up this process.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedI would like to change this title screen to english title screen at the precisely same picture on below but I want it to be in english title screen.
View 9 Replies View Related*tl;dr- Easy way to take the frames of a GIF and change them to a BMP (there are about 40 frames per Action) So- My friend was learning Java to build a game on Android while I would create the graphical resources. It will be a fighting game- so I went ahead and made animations for the moves and all the characters.
understanding the language so I thought I would go ahead and teach myself as well. I read faster than him- and I got to a point where I find out that graphical resources have to be in BMP (or so the author tells me) and that each frame in gif is a seperate BMP. So- is there an *Photoshop CS6 Willing to get on the cloud or something for the other CS programs.
I want to have my website and phone number rotating on the x-axis as an animated GIF. Is there a simple way to do this in Photoshop that I'm just missing?
I'd like to be able to insert the GIF in a movie project I've started in Sony Vegas.
I know there are probably countless topics regarding animated gifs and i search for them but couldn't find what i was looking for. I want to make a AIM Buddy Icon. I'm semi-experienced with Photoshop but I realize i need image ready to make animations.
View 2 Replies View RelatedI am trying to make an animated gif where an object starts at one end of the logo text and moves across and back. During the across and back I want to use the motion blur filter to simulate motion on the image.
I want the at symblol below to move across the logo text and then back. On the far right image and the far left image I want it to look regular (no effect) then all the tween ones I want to have a motion blur.
I have a video (.mov) and I opened image ready, made the animated gif. So i have a functioning animated gif of a hockey fight. I also have a pre-made .psd for my signature which includes a background, and another image. I have several problems.
I can transfer the gif over, and put it on the PSD.
1) The file size goes from 2.7mb to 112mb. ... WTF?
2) When i try and save it, it will only save the current layer/frame of what it sees. Therefor no more animated gif.
3) Also, how do I change the opacity of this? I would like to layer mask the finished product, then reveal using the brush with an opacity of about 75%, but the option is not available with linked-layers.
I downloaded a gif and opened it in Image Ready and proceeded to modify the nine frames it had to show a different face than the one it had.
After every frame mod I ran it in ImageReady to make sure it was working ok.
Once I had completed the mod I ran it again and it worked perfectly I then "Save Optimized As" and gave it a title and downloaded it to my desktop.
From there I opened it up in Safari to see if it worked ok and it worked but the face which had been so clear in ImageReady was now all spreckled with dots.
I tried to open it in ImageReady again and got the same results it was now spreckled with dots.
The original image was a black and white and the face I added was in colour but not sure if that would cause a problem seeing as it worked ok in ImageReady. I have added 2 pics so you can see the difference.
I am using a G4 Mac with PS-CS2
I am working on a art project where the main theme is human anatomy, and I am using Adobe Photoshop and Imageready to help me. I have made a animated gif, but am having trouble fading the layers into each other.
I was unable to upload it to imageshack or similiar due to its large size.
I have been trying to create a animated .gif with photoshop cs & imageready cs. I get all of the frames and everything the way I want and when I go to save as a Optimized .gif I only have options to save as "html" & "images only .gif"
way to save this so I get the animated .gif?
This animated .gif occupies the upper-left corner of a web page on my site. It is tabled to connect perfectly with a horizontal menu bar (you can see part of the menu bar in the image below). I created the ripples using Redfield Plugins.
I created these ripples because the corner of my web page needed something. I initially experimented with Greg's Plasma Effect inside various shapes, but decided to try for something a little more mellow. I settled on these magic ripples. Unfortunately, they need some help. I'm not sure what's missing. They need to be a little more glossy, perhaps. Or maybe some highlights, and possibly some reflections. I'm asking for your feedback and/or suggestions for improvement.
I made an animated gif in photoshop and saved it and made sure it worked. My problem is that I have a psd file that I am trying to put the animated gif into. When I try to paste it into my psd, it say that it will lose information if i save over it. I do not know what to do?! How do i put an animate gif into a psd?
I tried to go into image ready and save the psd into an html and then open the html in dreamweaver and replace the pic but it doesn't let me either because it saved the psd as a jpg and created an html and I cant put an image of the jpeg that was made in dreamweaver.
problem with a series of animated gif files. They're all japanese Kanji.
so there are 3 frames (as you can see), a white frame, a frame with the first stroke, and a third frame with the final stroke.
Now i want to edit the frames, but when i open it in photoshop i can only view the first frame (the blank screen). And i can't get to the other frames in imageready.
How can i get to the remaining 2 frames ?