VideoStudio :: Unable To Find Mercalli And BorisGraffiti
Dec 21, 2011
My problem is that I cannot access the proDADMercalli or Boris Graffiti features in VSP X4 Ultimate. I uninstalled a previous version of VSP X4 before installing VSP X4 Ultimate and made sure the files proDADMercalli20Corel|4.vft and the Boris Graffiti.vft files were in the appropriate folder for Corel VideoStudio Pro X4 in my 64 bit W7 system.
Just to make sure, I followed the Corel instructions and re-installed the files in the folder in question to ensure that they had not been corrupted. I still cannot find the features in the FX menu.
I have been having the dreaded Mercalli re-analysed message and found a thread that described how to render just the clip first and then insert into the project. I have just a few short SD clips in my project, the rest are standard jpg's. I rendered the short video clip with Mercalli and then inserted that clip into the final project. The only settings that seem to work reliably (in rendering the small clip) are HDV720p HDV and WMV. Other settings still produce a clip with the Mercalli message on it. Why though is the rendered clip smaller on the screen than the original? When it is inserted in the project timeline, it plays with black borders all around it like it is in a window instead of full screen. I'm happy to get rid of the Mercalli message, but not too thrilled about this break in continuity of the project by having shrunken images.
I've installed all the software and I can use the Boris FX as i can find it in the effects list and drag it on to a clip. However i Can't see Mercalli in the list or find anyway of accessing it from Video Studio
NB I've checked the ProDAD folder that installed and it's only 15mb in size and the .corel folder is empty
I love the inclusion of ProDAD in Corel X4 Ultimate. Some shots we would have binned have been effectively ressurected!
Only gripe is that we make Pal 50i Blurays and I hate having to render things twice.
So for that reason we normally output at 50i and simply add to Nero and it can very quickly author and burn these files with almost no rendering.
We cannot output at 50i with ProDad Mercalli inserted onto our clips. It will certainly render the timeline but it comes up with a horrible darkened screen over the shot which has had Mercalli added to it. It says that the clip needs to be analysed again. The clips have already been analysed and we have no problems rendering at 25p. Is there a work around for this or our Corel addressing this issue? I know that Mercalli in other video editing software has the ability to manipulate interlaced shots but I thought it wouldn't matter for rendering.
I have had this product for about a week and it is fabulous compared to any other video editors I have tested.
There is something odd happening, however. I am using the Mercalli plug-in to stabilize hand-held videos. This works great but the rendered video always has a message overlaid saying the Mercalli analysis must be re-run (even if it has just been done). There IS an exception: render to mpeg4 and everything's fine - stabilization has been applied and no message. If I then take the exact same project (no changes) and render into AVCHD (for example), the output is ruined with the overlay. If I go back into the project again to have a look at what's up re-analysis is NOT called for.
I am getting this across the screen on every video that I use Mercalli on. Not to mention horrible lock up's and slow operation.I was so fed up last night that I dumped my entire PC and loaded WIN 7 and all its updates and then VSX4.Still I am getting the same behaviour. I run the filter and it goes through its little screen of adjusting the clip based on the settings used.But I still get this warning on the final project even though the analysis WAS run. I was able to get it to work with an upload to Youtube (.flv) but anything to Disc gives the warning.Also found that VSX4 crashes if you try and save to video folders as well as burn the disk.Now that I think about this it all seemed to start after the last Windows updates. I'm running WIN 7 X64 Home Premium
I am struggling to get VS ProX4 to scan for and correctly identify TV channels. I have just installed the program and in every other aspect, the program is working correctly.
Under the capture option, the program is identifying that I have a DVB digital tuner card. It’s actually a dual card with both digital and analogue signals. If I click on options > video properties, I have the option to scan - but every time I do so, the program freezes at 40% and stops working.
I can change the Country/Region but the properties box is greyed out - and therefore I am not able to check that for example, it is scanning for antenna and not cable.
I’m running windows 7 and on windows MC, I have correctly identified over 100 channels so I’m pretty certain the tuner card is working.
I'm completely new to this program, so honestly i don't understand almost nothing: i've bought a model of a human person in .Max format, which showed in the description ans screenshots that was rigged, but i'm completely unable to find the rig in the model or the tool to show it, and being in a hurry doesn'twork.
whenever I try to run Autodesk 3ds Max 2012 with Gamebryo, and I use 'attach to process' debugging with Visual Studio, I get the error message "unable to find any plug-ins at: C:Gamebryo..." in 3ds Max.
Then, when 3ds Max opens up and I click on an icon such as Gamebryo Export, Gamebryo Preview, etc, I get the error message " syntax error: at /, expected <factor> in line: "Gamebryo/NiMaxOptions.h"// " in Maxscript. For example, for the Gamebryo-AutoPreview.mcr file, that message shows up on the line
[code] DoGamebryoView(-1)[/code]
If I then include NiMaxOptions.h in the Gamebryo-Export.mcr file, like below, I get the error message: "syntax error at /, expected <factor> In line: include "Gamebryo/NiMaxOptions.h"//
I've tried to download the Photoshop CS6 Extended trial, but it was missing from the download assistant, so I just downloaded the version that was available, the 3D feature was missing, which is one of the only reasons I decided to get the trail for Extended, it's not grayed out, it's just simply not there.
My PC's specs are: Windows 8 Professional 64bit, CPU is an AMD FX-4100 Quad Core, 8GB of DDR3 RAM, My GPU is a NVIDIA GeForce GTX 550ti,
I can't snap to a midpoint in a line. For example, If I draw a line 10" long, I can't draw a line from the center of that line. It used to give me an auto snap option to go to, but now it only allows me to snap to the ends of that line.
A couple days ago, I was making some images, and I looked up a tutorial on how to make a watermark [URL]....... I did everything it said, but I could not find the brush.
I have a dll which shows simple dialog, which in its constructor reads from a file located in the same folder as the dll, to populate some of the controls in the form, like combo boxes. The assembly works perfectly at local pc, but when I take release copy of the dll and the file at work, I cannot read from the file.
I am able to load the dll with the Netload, but when i start the command it shows - "Unable to find assembly 'Pressurized Pipes, Version=1.0.0.0, Culture=neutral, PublicKey Token=null'. And when I click OK button shows second dialog saying "Unhandled exception has occurred in a component in your application. If you continue, the application will ignore this error and attempt to continue. Invalid Argument=Value of '0' is not valid for 'SelectedIndex'. Parameter name: SelectedIndex.
Details:
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.ArgumentOutOfRangeException: InvalidArgument=Value of '0' is not valid for 'SelectedIndex'. Parameter name: SelectedIndex at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value) at Plumbing_Pipes.Pressurized_Pipes_Form.populatePipeTypeComboBox() at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
It seems to me that I am not able to Deserialize the file and read from the list in the file, which list I use to populate the combobox.
I am using just the name of the file to deserialize it, assuming that the dll will look in the folder where the dll is located.
Just downloaded GIMP on Vista and tried to import a PDF file that I need to work on. I got the file into the Import (?) window, clicked on Import and the program whirred away for a while but I can't see or find the file - there's just a blank window.
How can I find my file to work on it? Do I need to load it into GIMP in a special way?
We can not open most files. Tiff, PSD, some PDF files will give an "unable to find file error". Jpg files, and certain PDF files and TIFF files that use jpg compression work. I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word. The font list shows a lot of fonts as just a white box. Other apps can use the fonts fine. Just not in word.I have attatched a JPG file with screen caps of the errors.
I opened my Autocad today to discover that none of the drawings I open are displaying any type of text. This includes dimension text, multi/single line text, and titleblocks. My coworkers can open with text, so I am confident that it is a setting of some sort in my program. I have looked thropugh every menu and option and I have been unable to find the setting that would need to be changed.
I installed ACADLT 2012. I am unable to find PFD design and symbols. I am not sure if LT comes with it or if needs to be downloaded separately as a separate package
I do not find the profile of my lens(Sony/zeiss vario sonnar T F 1,8) in lightroom 5.2 when correcting for lensdistortion. Another lensprofile also from Zeiss comes up (Zeiss Apo sonnar T 2/135 ZE).Is it a similar lens and should I then use it?
I just installed elements 12 and the install went well, except for all my lightroom images.After installing elements 12 I went to look at my lightroom catalog onlt to find it was no longer there. There was an option to upgrade my elements catalog to lightroom, that seemed to make sense so I did that next.at this point my lightroom (3) catalog is there but there are NO images only blank squares.
At this point I am deeply regretful that I ever upgraded elements 10 to 12, everthing was working just fine till i installed elements 12.
Just got PS CS6 and Illustrator CS6 and went on to edit some pics of my cat. Only to find out that my Lightroom 3.6 doesn't seem to find PNG files exported from RAW using PS CS6.
Is this normal and I have to cough up some more for LR4?
I cannot find the drop down for Polar array. I just have the 4 squares for array when I click on it I can request polar as the array type but it gives me a quirky menu with grips and does not allow me to set fill angles and number of pieces. I had issues loading this program, Map3D 2013 and was wondering if it was skipped in the installation, The circular pattern button is not on list of commands but does show in the documentation provided.
I just started using Maya 2011, and in 8.5 the view window had a dropdown menu to change the viewport to polygon transparency sorting. Well there is no dropdown menu in 2011. So where do I change it? I can't tell if I'm clipping my model onto itself without doing a render.
Got this low-poly model here. I created some bones for it and inserted them into the mesh. But when I use the Skin Modifier into it, and use the 'add' button under "Parameters". No bones appear in the list?
I am having trouble creating the realistic skin pores. I have started playing with blues, yellow and reds for skin tones but am still unable to find a way to create skin pores in mudbox.
I inserted a block into a very busy drawing. I can't find it now. Is there a way to locate it? I want to delete and insert a newer version, but I can't until I delete this one.
