VideoStudio :: SmartRender Causing Audio Latency And Freezes
Apr 12, 2011
I was using Ulead VideoStudio SE and 12.0 without any issues but ever since I tried a trial version of X3 or X4 I'm unable to render videos properly with SE and 12.0 using SmartRender. What happens is after 8 minutes, the sound of the video stops and when the sound comes back on, the frames start freezing. This issue occurred before and I removed the trial versions and reinstalled all my drivers, etc. to fix the problem. But now I tried doing the same thing and it's not working. I even tried to cleanup everything of Ulead and Corel on my system, but the render issue still occurs.
Does VSP X4 have SmartRender for HDV like Media Studio Pro? Apparently MSP is history, and the only app I see available here is VSP. I would like to use an editor that doesn't re-render HDV footage that isn't processed in any way on the timeline.
I've now had this happen with two completely separate projects today where I preview my edit, everything looks and sounds good, but then when I export there's a clear audio stutter wherever I used a constant power audio tansition.
NOTE: I experienced the Constant Power bug that happen last month that sounded like a super loud buzz. This is different.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
I am running XP and X5 Ultimate.My workflow follows :
File Insert media file to library Insert Digital media Select drive in import from digital media box Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.
I didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
How can I remove libraries without causing Load Stream Error. Should I delete all the contents first? I have created several libraries for my individual projects but whenever I have finished with one and try to remove (delete) it I get this error message and have to reset to factory defaults. This means losing the libraries I still want to use.
I have just installed VSx4. I successfully made a project, and saved it, but when I go to the 'Share' stage, I cannot burn a DVD. All the steps complete, including preview, but when I click Burn the screen freezes at commencement, showing 3% complete and 'converting title'. Only the Cancel button appears active, but clicking on it yields no result. I noted that the DVD writer line on the menu, despite showing correct information, appeared greyed out. To exit the program and abort, I have to use Windows Task manager, which then tells me the program is waiting for a response from me - but there is no menu or screen I can find of this nature. I have to force closure with Task Manager.
Me and some fellows at work have been noticing a significant increase in the time it takes to copy with base point and paste into a different drawing file. Maybe it is just the 2012 version of the software , what has changed or how to minimize the time this takes. I don't see any reason it should take up to a minute to copy a few polylines from one drawing to the next.
I have an issue where we print a set of drawings from SSM and a couple of the drawings (not the complete set) had detail call outs with hashtags where the field didn't update.
This is with the FIELDEVAL setting for these drawings at 31. You can open that drawing and print it and the callouts populate fine. I had another user in the same office try and print the drawings 2 weeks later and the callouts populated.
I tried right after that (I am in a different office 45 miles away) and the callouts didn't populate. I"m thinking this has got to be some type of network latency issue because it's very sporadic.
I just updated to the latest version of Edge Animate CC yesterday. Great new features, by the way! However, I have noticed that with a simple file that I created with the new version, there is a 3-4 second loading latency when previewing a file and when launching the published version. This is not the case with files that I created in the previous version and have not updated.
Example: I have a gray rectangle element that covers the entire stage, and I have an action on creationComplete to hide the element. I see the rectangle immediately on launch, but it takes 3-4 seconds to hide.
I'm having a technical question with a customers Revit Architecture 2012. The project he's working on is about 90 Megabytes in size, and the references are about 60MB. He is storing these on a network share. Unfortunately they are still on a 100MBit network. As Workstation he is using a DELL Precision M6500 (notebook) with the following specs:
when he is trying to zoom in on and out of this project, he is experiencing high waiting time between the zoom-steps, sometimes unbearably long. As the notebook is brandnew and tested I didn't blame it on faulty hardware. So I suggested to run the same Project on a different machine.
I don't know much about the software architecture of Revit Architecture, so i don't know which hardware component is mostly stressed when zooming in and out (guessing the gfx, because the project needs to be recalculated?). I guess there lies the bottleneck.The customer requested an answer, which hardware needs to be exchanged / upgraded in order to accelerate the zoom-steps, decrease the latency.
I'm experiencing latency when playing movies in LR5. I'm connected to my Windows server from a new/fast Macbook running 10.9. Right now, the batch that I'm experiecing this with are .MOV files, but it's happened with other formats as well. The movies play fine when I open them in QT from Finder, so I know it's not the server connection, which uses Gigabit ethernet. When I play them through LR5, I often experience delays where I'll hear the audio, but the video is frozen. Then when I swittch back from Loupe to Grid view, I get the spinning wheel for a while. This even occurs on short movies - 2-3 minuyes long, under 5MB. This should be an easy thing to implement, and baseline for offering movie capabilities.
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
Slideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
I have VideoStudio X5 Pro. Trying to add voice over using a mike. Problem I am having is the volume. On playback I can barely hear my voice. Have raise the volume level in X5 to the max, still have the issue.
My PC got a virus and I had to reinstall VideoStudio 11 afterwards.
For the first time since, I've burned a multi-chapter DVD and when I play it there is no audio on Chapters 2-4 but it sounds fine on the menu music and the first chapter. Each chapter is an AVI and plays fine in VS and then in the menu preview.
I've reinstalled the software a couple of times and tried a different DVD+R but still no audio on half of the disc.
I have been using VS11+ for a few years, and have never run across this problem until now. I am trying to import DVDs recorded on a specific machine and am getting video but no audio. There is audio on the DVDs. I have tried importing both as mpg and as avi (in project properties) but neither works. Although I've been using VS, I am self-taught and not very knowledgeable about codecs, recoding, etc. I mainly use VS for importing video from DVDs, editing, rendering and burning onto DVDs. I am not certain of the make/model of the DVD recorder, but I do know it is new. (I did a keyword search for "import DVD no audio" before posting, but it returned over 2,000 results).
I used to work in MediaStudio Pro which I really like it because it is very user friendly, then suddenly Corel killed them all by buying them, and never continue that wonderful program.How to edit the audio on the timeline? What I mean is, in MediaStudio Pro, from the Audio in Timeline, I can raise the audio up, then few minutes, low it down, then few seconds later, raise up again etc...From what I see right now on X6, for audio I can only either use the Audio filter to low down or to raise up the whole clip but not, raise up or low down at at any part that I want to.
In my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
