I have created dvds using multiple .vsp files. I am now unable to open these projects. It seems like I have to relink the projects .vsp files. I can see that the file size as if the project includes .vsp files but when I go to "share", "create dvd" nothing is there.
View 4 RepliesMy PC crashed and has two projects that I had completed a significant amount of work on. The the video files and vsp files are stored on Edrive and music on Ddrive. I had also created some painting creator files and am not sure where they will have been saved? Rather than try to reinstall windows and reformat the C drive I have decided to upgrade to a new PC. I could then remove the 2 slave drives from the old pc and use hard drive housings and a usb connection to link them to the new pc (don't feel confident enough to install them directly into the new one). I am concerned that the drives will then have different names and the vsp file will not recognise the files resulting in days of lost work. I notice that there is a function called relink but am not sure how this works and whether I will be able to use it to recover all of the edits easily.
The new PC will be intel i7 with nvidia gtx 570 graphics card, I have also ordered PROx4 ultimate so would prefer to use this.
The options as I see them are:
1. Reinstall windows and persevere with the old PC assuming that the slave drives are intact.
2. Remove the slave drives and connect through USB then try and rename the drive to the same as before (e and d)
3. Remove the drives and connect through USB, let the new pc allocate a name to them and use the relink function?
VS6 Pro Ultimate..I started a project a week or so ago nothing fancy just some photos overlaid onto a video with a sound track, I saved it as a project, opened it today only to face relinking all the photos some 150 of them! The folder that you place all your photos showed they were not linked so I relinked them, then I opened the project only to find most of the photos were not linked!
1: Is there a batch relinking I can use?
2: What would cause this issue? ( I've never had this before)
3: How do I prevent it happening again?
I made a complex video clip from .avi files with Corel Videostudio Pro X3, I saved the project then moved my original files to different folder. After some time I decided I want to edit my video again and re-linked the files successfully but now when I try to play my project in edit mode it doesn't play smoothly, it stops and delays. I can't edit in such conditions because I can't preview my work... Before moving my files everything was fine. No changes were made to my computer...
View 3 Replies View RelatedI have a project that was created entirely with still images (almost 200,000) shot with a Canon 5D. I converted the CR2 (RAW) to jpegs and edited the project in Final Cut Pro using those jpegs. I then used Automatic Duck to send the FCP project to After Effects where I used the Batch n Replace script from [URL] to replace the jpegs with the CR2 files for color correction. The problem I'm running into is the script creates a new project where the CR2 files have replaced the jpegs, however everything is offline. The images for each sequence are sorted into folders so I go to the first image in a folder and tell AE to replace it with the proper file. AE thinks for a bit and finds and replaces all of the other images in that folder. Depending on how many images are in a particular folder, it can take anywhere from 5 minutes to several hours for AE to finish. It took over 4 hours for AE to relink a project with 10 shots/images sequences containing over 12,000 images.
All of the AE project files are shared via Dropbox with the other Mac Pro in my studio. I opened one of the projects on the other computer and tried to relink to the CR2 files on my RAID over the network but I had to do each image one by one. Is there a way to relink the files over the network the same way as if they were on my own computer?
I accidentally moved some files while working on a promo. When i try to relink the files I all these different icons - see attachment. Yellow boxes, etc., when I try to relink matching files Smoke hangs.
View 2 Replies View RelatedI have been using Indesign CC for a month or two now and for some reason it just started crashing when I try and relink a file in a publication I'm working on. It has worked fine up until this point. I have already tried reinstalling the program and I've even tried dragging/dropping the links instead of relinking through the LINKS box.
View 2 Replies View RelatedI have received a project edited on PPro 7.1.0 with a number of Canon C300 spanned clips. I have PPro 7.2.1. When I relink the clips the spanned clips link incorrectly. In fact all the span clips have incorrect timecode. The original editor on PPro 7.1.0 brought in the span clips as individual clips with sequential timecode. When I import the clips they come in as clips all of the same length but the time code is way off eg a clip that should start at 01:01:31:17 starts at 01:17:18:18. This is really less than satisfactory and the fact that we need to hand this project back and forth is really going to make life very difficult. Adobe and Canon need to sort this span clip thing out.
View 34 Replies View RelatedI have a series of folders and I have linked art and the files they are linked to all mixed up in these folders. My file structure is as such;
myFilesHH01000-01999HH01000-HH01099HH001001.PDF
and now I need to change the file structure to this;
myFilesHHHH01000-01999HH01000-HH01099HH001001.PDF
adding the folder HH breaks the links.
What is the best way to identify the broken link and change its path with JSX?
Is it possible to automatically relink based on file type? I have hundreds of illustrator files that need three images in each changed out for a updated versions. It just so happens that the three all have different file extensions.
It seems that there should be a way to have illustrator replace the one .jpg file with another .jpg file (named differently) that's in the same location as the old file. Is there some type of more powerful scripting interface for illustrator besides the actions? vbscripting or something?
I realize that this isn't a normally supported feature of the links panel. I know that I can open each file and manually relink them as I open them. Hoping to save some time. I have to do this a couple times a year as we get in fresh images that we want to stuff into the same presentation format.
The file names contain timestamps that need to remain there so simply renaming the new files to match the old ones isn't an option either.
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies View RelatedI'm trying to change a few MTS file(AVCHD) to .MOV files,is this possible using ProX4? I have tryed this but the sounds is all messed up or the video is always sticky when trying to watch the outcome.
View 11 Replies View Relatedwhat .upd files are for and what they contain?
They are created along with rendered file and reside in the same directory.
Just got a Kodak si8 video camera for my bday... It records in MOV - I am able to open them up and I get through the whole video - 7 minutes... then I go back to clip some areas and the sound gets choppy!?? If I save - close the program and open up again -- I get the sound AOK again ???
What is this about?
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
I'm editing MPEG-4 PAL HD files from a Samsung Cam. After editing, I want to create a MPEG-4 HD file with the same profile (1920x1080 at 25 fps). Choosing MPEG4-HD profile, 30 fps files are generated. Also defining a MPEG4 custom profile with H.264-MAIN type and 1920x1080 resolution, the fps is locked at 30 (at lower resolutions, like 1280x720 the frame rate can be modifies). Ist it a constraint of H.264-MAIN video type ot a bug ?
Please consider that VS X3 is installed for PAL Video System and choosing Bluray profile or AVCHD profile PAL HD files 25 fps are generated.
On the spur of the moment I bought a cheap little Medion [Aldi] HD digital camera which offers five options for recording - 720P60, 1080P, OVGA, WVGA and HD. They all produce .AVI files which play OK on my laptop but when loaded into VSX3 I get the message ‘file not accessible’. The rudimentary ArcSoft program provided with the camera [and now on my laptop] handles the files OK.
View 5 Replies View RelatedWith VS X4 I edited my .mts files into .vsp files. Then successfully created video files (.m2t 1440 x 1080 files) . I selected 1440 x 1080 because it is the setting set on my camcorder.
My question is in the Create disc step:
1. if I burn these .m2t files and select "DVD" would the resolution be back to that of .mpg in the final DVD?
2. If I burn these .m2t files and select "AVCHD" and instead of burning directly onto a disk, placed it on a hard drive folder. Then later could I burn it on a regular DVD disk? If that is the case, is the disk playable on a regular DVD player? Or, do I have to burn it on Blue Ray?
I know I could experiment it but my project has 4 Titles, each of about 30 min duration, that I want to burn. I tried to find the answer on the Forum and also in the Manual but could not find the answer there.
Am I correct in assuming that mts files aren't compatible with VSX2? I can drag them to the library but when I put them on the timeline the program shuts down. These are HD files from my Canon video camera.
I also can't import them- I've tried every way to get the files into VS but it shuts down.
When I create Blu Ray H264 (1920X1080) video clips in VS Pro X3, all files give me extensions *.mpg, and they can be played with my LG BD 570 player. However, When I create Blu Ray H264, 1920X1080 video clips in VS Pro X4, all files give me extensions *.m2t, and these video files can NOT be played with my LG BD 570 player.
Is there anyway I can create Blu Ray H264 (1920X1080) video files with extensions *.mpg in VS Pro X4? What is the difference between Blu Ray H264 (1920X1080) *.m2ts and Blu Ray H264 (1920X1080) * .mpg file?
I recently purchased Video Studio Express 2010 and cannot import avi files that were created using a Flip. I have tried importing them from both my hard drive and a flash drive. VSE does not recognize the avi files on either drive. I have been able to import mpg files without any problems.
View 6 Replies View RelatedI just bought X4 and can't import High Def. MOV files. VS doesn't even see them! how do I import them?
View 14 Replies View RelatedI've searched these forums for any "how to's" and found some info, but either it was over my head as to the fix or it delt with different video file formats or error messages.
The short version:
I have a fresh install of X4 on a 64 bit Windows 7 (Pro) and I'm trying to import *.MTS video files into the timeline but keep getting "File format Mismatch 1081:1:3" errors. I've copied the files from the SD card to the harddrive. I've also tried renaming the file(s) extensions from MTS to M2TS, AVI, MPG, and still get the error.
The long winded version:
I had X4 on a 32 bit PC for a long time. Installed Panasonics AE reader software that came with the HDC-SDT750 camcorder. X4 could recognize the MTS files and import them into the timeline. The PC motherboard failed so I got new motherboard and decided to do a fresh install of the 64 bit version of Win 7 Pro on a clean harddrive. Did a fresh install of X4. Then installed all Windows and X4 updates and patches.
When I try to insert a MTS video clip (file) into the timeline from either the SD card or harddrive I get the error message "File format Mismatch 1081:1:3". I can play the video files through windows media player (No matter what I've changed the file extesion to) and the video and sound play fine. I can also insert any other video file into a timeline except MTS files (New or older ones). With X4 up and running and searching for which video file to insert I can see the MTS video preview thumbnail in the file explorer window.
The video clips are 1920X1080 at 29 fms and a bit rate of 16794kbps
I can't find the Panasonic software disk and the best that I can tell Panasonic does not have their software online for download.
I will need some hand holding here so I'll need more step by step instructions than "Get the latest codecs" (Whatever that means)
System info:
Editor: X4 (With update)
DirectX: 11
CPU: Intel i7, 2600K
RAM: 8 gig
HD: 1 Tb
OS: Win 7 Pro
Camera: Panasonic HDC-SDT750
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies View RelatedI am new to using Video Studio Pro. I would like to animate my Paint Shop Pro png files or gif files with Video Studio. I figured out how to make the video work and figured out how to change the speed on individual frames. My problem is saving the project. I can only save it as a VSP file and it is too big to upload to Photo bucket. The whole animation is 15KB.
Can you change the save as file extension to include animated gifs?
Whenever I import an AvI file into Corel Video Studio Pro X5 there is no sound whatsoever. Other file types work fine, but any and all AVIs I try will not play back any audio. I have tried at least a dozen from different origins and no success.
View 10 Replies View RelatedCan .swf files be created and used in X3 as titles, video, images or other special effects? I'm just curious to know if any .swf files that I would create in SWiSH would be able to be imported into X3.
View 3 Replies View RelatedVideo studio has an export option "save as first video clip" for mpeg files. Don't see that for wmv files. Is there a way to save an edited wmv file using the original files properties without doing a custom setup? Windows Movie Maker seems to do this but it's a pain to use.
View 1 Replies View RelatedWhat a good start after just installing X4. I tried to add my avi files for editing and every single one fails with the catastrophic failure message. If I double click any avi file, the windows media player plays it fine.
I have edited these avi files many times with x2 before. I tried opening mpg files and they were ok. So im guessing its to do with an avi decoder? - but if so why does the avi file play fine in windows media player?
I got a new laptop and loaded VS x4 on it. I have a complex edit that I started on my big desktop, where everything worked fine. I have a mix of AVCHD and MOV (1080i QuickTime) files, and they work together with no problem on the desktop computer.
However, the new laptop simply can't "see" the QuickTime files. I can't load them into the Library, so I can't re-link them in my project. I updated my version of VS x4 to SP2 on this computer, and still no go with the MOV files. How do I get VS to recognize the MOV files?
Edit: I can play the MOV files on the computer and I loaded the latest version of QuickTime. But VideoStudio still doesn't recognize QuickTime (MOV) files. MOV is not a selection in the drop-down list when I choose formats of videos to load into the Library.
The previous problem I had was it wouldn't smart proxy 1GB files and above (still not fixed), now X3 won't open files 1GB and above. I tried opening files over 1GB that I have edited before, but it's not happening. Basically the files are from a Canon 5D MKII, converted to AVI via Cineform Neoscene. Today I selected about 12 clips I have just converted to AVI I filmed yesterday, and 4 of them (over 1GB) gave the following message
".... file is not accessible"
then
"these files cannot be added to this project. These files may be of unknown file format. The computer does not have enough memory, or the file is coyright protected"
Is there some restriction setting I have accidentally selected? Like I said this is a new problem, these files would open before. I've tried clearing some space on my laptop's hard drive, so there's over 200GB, but that didn't work either. I contacted Cineform, and they said their file format is the same whether it is above or below 1GB in size, so the problem lies with Videostudio.