I recently bought X4 and noticed that you can't loop/repeat some files using the 'repeat' button. The volume button also seems to appear for some and not all files. Is there something I'm missing here or is this a file compatibility issue?
View 3 Replies
I am using X6. When I tried to launch a music track from "Smartsound", (from the owned section) the "Add to Timeline" was greyed out.
I Split the Audio from the video and it landed in the VoiceOver track. Is it possible to make it land in one of the music tracks?
Is it possible to alter the volume across all the clips on the timeline without having to alter each clip separately?
In the burn stage, after picking a menu template, I cannot adjust the volume of the music for the template. I enter the preview screen and adjust the volume there, using the slider. When I preview the video the volume is where I set it. But when I burn the project the music is back to it's original level, which is very loud. I can select no music, and this works but i can't adjust the volume.
View 3 Replies View RelatedI made a 4 minute video comprising 25 clips including background audio and an accompanying "Auto Music" Music track.At present the background sound of the kiteboarding video is too loud and overpowers the music.
How to I reduce the volume of the entire 4 minute video track in a single procedure? If I open Sound Mixer I only see a way to adjust individual points in each of the 25 individual clips. So changing it this way would involve a ridiculous amount of work. Ideally I would like to simultaneously reduce the background water action sound to about 25% of current lever for the entire video track. Then perhaps go back in and bump it up again in one two two spots to accentuate things. I can select the entire video track with shift/enter but then most of the menus are greyed out. Also tried splitting audio from video but it only does it for one clip at a time. Surely there is an easier way?
Background: I am new to videostudio after deciding Adobe Elements which came with my HP laptop is too complex for what I want. All I want is a simple video editing package. So that I can take kiteboarding video from a GoPro, cut it down to something worth watching and adding non copyright background sound. I can then put it on my iPad or share it to friends via youtube. So I am trialling VideoStudio X6 which seems to fit the bill. Dealing with the audio is the only bugbear I have and I want to work it out before I buy it. I cannot believe it can be so complicate to bump the background audio volume down a few notches.
I am a long time Pinnacle Studio user trying out the demo for VS6 Pro. Is there a way to adjust the volume at a point in the project so that the audio to the right follows the volume setting, including all the clips to the right of the edit point? I like to bring down the audio for a good portion of the project then bring it back up etc. It would be very time consuming to have to do this for each clip.
View 5 Replies View RelatedAfter staying away from video editing for some time I have just installed VS X5. But here I can't find the Audio View in which I could adjust the sound volume (using the graph) in the video track. Has it gone away or is it just that I can't find it?
Does this mean that I have to split the audio from the video to be able to adjust the volume (up and down at various places, not just the track volume).
When trying to lay a music track in my project from the Auto Music library, I am unable to adjust the level of that music. Prior to laying the track the volume control is grayed-out and unavailable.
After the track is laid and the volume control is available, it has no effect on the music level in the laid track.
When creating movies from video taken I add both background music, narration and sometimes sound effects.
When using background music in particular I prefer to reduce the volume during narration so that the narration can easily be heard. I have been doing that using the 'rubber band' by trial and error - I reduce the volume by 'pulling' the 'rubber band' down a little and then preview that section of the video to check if the volume level is correct/to my satisfaction. I note that during the process of adjusting sound level with the 'rubber band' that there is a sound level 'meter' (in decibels) but I don't seem to be able to use it. Is this (adjusting the sound level in decibels) the method I should be using and if so how is it used?
What is the best method to use when adjusting sound levels in the middle of a sound 'clip'?
I am designing perfume bottles and for that i need to to repeat a semi circle to repeat over a curved surface fo the bottle. To simplify the problem i have created curved surface and made a semi cirle as a feature, now i want the feature to repeat on the curved surface. I have tried to rectangle pattern, aswell as the circular pattern in all possible ways i can think.
P.s. I have hp I7 processor, 8 gb ram, windows 7 and am using autodesk inventor pro 2013
I'm trying to make a video that will repeat about 10 times, but with a different audio track each time. Is there an easy way to do this ?
View 5 Replies View RelatedNavigation controls are set to “Auto repeat when playback ends”
I change this to “Continue to play next clip” which plays the disc and returns to menu.
The next time I come to use Video Studio it has reverted to the default option.
Earlier versions always retained the options set by the user.
How to check their version to see if you can duplicate this, or is it something to do with my settings?
In my latest video, I have inserted several different music tracks but they vary in volume. Is there any way one can make all inserted tracks an identical (or similar) volume level?
View 1 Replies View RelatedI have a project with many clips. I am trying to change the volume on all of them to the same level. I tried shift click on the first clip and then the same on the last one to group them all. They group but I can't change the volume for all of it. Do I have to change volume separately on each clip?
If so, is there an easier way other than dragging the little markers up and down when I'm on the volume timeline?
I currently use VSP X4 and would like you to explain the tool(s) available to guarantee a good audio balance.
If we consider the 3 types of audio - the "Feature" audio, the "Ambience" audio and the "Effect" audio (like music or narration), how can I be sure they are as relevant & accurate to each other as possible?
An example.
I record someone talking on video, VSP assumes a 100 volume level for starters. I add a background music track and again it assumes a 100 volume level. Due to the nature of the MP3 or WAV file it is always louder so I reduce the volume however, sometimes when I produce a final DVD or video file, I wish I had have lowered the music track further or increased the person talking volume because the music has overpowered a bit much.
When I select Sound Mixer; Attribute; and hover over the clip volume meter, I notice 40% is displayed.
Q1/ Is this only using 40% worth of the original volume level?
Q2/ What measures can I use in VSP x4 so that when a DVD is eventually played, there isn't a need to crank up the TV volume to hear good audio levels which then in turn introduces audio "noise"
Q3/ I notice the audio meter is coloured and I suspect that touching the red signals mean distortion. How can I use this for overall best effect?
Q4/ Should I be mixing audio levels using the "-36 to +12" slider or the clip volume in Q1?
I intend using tie-mics soon and I expect all audios I throw at my projects will need a careful balance
I am trying to understand how volume editing works. When I edit the volume, if I the volume slider control in attributes, it move the blue volume line up and down. If I edit in the timeline, if moves the brown line up and down. What is the difference in the blue and brown lines? When I play my projects, sometimes the blue lines seems to be setting the audio level and sometimes the brown line seems to be setting it.
View 7 Replies View RelatedAlthough I have used Ulead VideoStudio occasionally over a few years, with moderate success (as I am a complete beginner at video editing), one problem has occurred quite often, and I have not been able to find out how to correct it.
It is this: when I burn a DVD, then put the DVD into a DVD player attached to a TV set, the volume - set at a comfortable listening level on the TV ( in one case, the level is defined at 40) - is very uncomfortably loud, so much so that the TV volume needs to be reduced to 15-20 before it is tolerable.
Is there any way of controlling the volume during the DVD burn?
I found a post here that says the best way to increase the volume in a video is to normalize all clips individually. I tried that but for some reason my video would get all buggy with I split the clips into video and audio and then normalized the audio.
Buggy in the sense that at playback it would just stop as if stuck and wouldn't play. Then I tried creating a media file despite the fact but it would not do so.
Fast forward I am out of time for a project so I went to every clip and changed the audio percentage instead.
In sum, my question is, is there a way to increase the volume for the whole video before or after the mp4 output is created? Somehow the overall volume doesn't seem loud enough.
I have recently been burning my videos to Blu Ray disks using VS Ultimate X6. Once I have rendered my video project I select the "burn to disk" option and create chapter menus etc and apply a music soundtrack to the menu. I generally create a BDMV file so I can store a back up copy on my media centre. I then build and burn to Blu Ray disk using ImgBurn. All works like a treat however when I play the disk the menu audio is way too loud such that on one occasion it has overloaded my sound system and caused auto shut down. Is there any way to adjust / reduce the volume of the menu audio or normalise it to the rest of the audio on the disk. I have not had any similar issues in the past creating an .ISO file and then burning the DVD.
View 1 Replies View RelatedAll of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies View RelatedSo I drag and drop a bunch of video files into the timeline and want to mute them all in one easy step. It would seem that all you would need to do it right click and mute while they are still all selected from the import but the mute setting isn't active. meaning I have to mute each clip separately. That takes a LONG time.
View 3 Replies View RelatedI am wondering if there is another method to control volume levels on the audio and voice over tracks. I am thinking particularly about a method to easily (automatically) reduce the volume of the background music when a voiceover starts and raising it again after the voiceover is finished.
I find the existing process of capturing a volume node fiddly and, for me, a bit hit and miss.
Is there a way to adjust left or right stereo volume separately? I recorded a live performance with vocals to left and music to right so I can have more control of the mixing levels. So far the only thing I can figure out is to import the same video file into the music track and duplicate the audio so that it plays left, and the video track plays the right.
View 2 Replies View RelatedI've VideoStudio x5 and I try to delete volume control points from my clip in the Sound Mixer. Tooltip says "Delete this control by dragging outside the clip" but it doesn't work.
View 2 Replies View Relatedwhy I'm having trouble with VSX5 Pro's "Sound Mixer?" It isn't working, and I don't know if my issue is one that has been reported already, or not. In my timeline (under 'voice track') I have an audio file which I separated from the main video file. The main video file is now 'muted' so that only my voice track plays the sounds. Note: I copied the same voice track and pasted 3 copies of it only to lengthen the overall playtime, but they are each on the same voice track.
The problem I'm having is that the volume adjustment settings don't work. After selecting the first segment on my voice track, I then move the slider up to maximum volume (from level 0 to 12), and then I right-click on it to save it as "default," but it ALWAYS jumps back to volume level zero (0)! It does the same thing even if I don't "right-click" and save it. The setting never stays where I want it to. What else can I do to increase the volume of the sounds on my 3 segments in my voice track, and have them stay at level 12?
EDITED: Also, is there some way I can save/export my "voice track" to an external sound file and/or convert it into a different sound format? I haven't seen a way to do that.
The Issue: adjusting the volume of a DVD menu background music (and only that), How to.
Problem statement: Running X5 pro. Preparing a DVD disk with an introduction and 6 clips, with one main menu. Having chosen the smartscene menu template to use, the items on the menu are adjusted (sometimes the menu item needs a simple name rather than the clip file name, and specifically the name/spelling on the menu item should match whatever is in the clip it relates to), and finally the Edit tab selected to choose a different music track for the menu. The option button here allows a variety of tweaks to the music - the music selection, fade in/out, duration etc, but NOT the volume of the music when played as the menu background.
The previewed end result has significantly (twice the volume at least) louder music that the remaining clips. Disconcerting to a viewer. Now, I know there is a normalise audio button at the final burn stage to (supposedly) even out the sound variations, but I've found an issue with that (separate post on this forum recently. The short term fix is to manually even the sound levels of clips out before burning the DVD with that normalise audio button OFF). That approach does not cover the sound level of the background music for the menu, which by default is rather loud, and with no apparent means of turning the volume of it down without impacting the rest of the disk.
Also noted in preview, there is a speaker symbol permitting volume control, but by experimentation that appears to manage the volume of everything, rather than just the menu.
The question: Is there a way of adjusting the menu music sound level ONLY?
I have been using VS since version 9 and I seem to get the same thing on each version. After I have completed the project and burn to DVD the audio track seems too loud. I don't seem to notice it playing back the file (computer speakers aren't much chop) but once in the DVD player you always have to quickly turn down the volume once it starts playing. There is no static or distortion its just too loud. I now go into every song I input on the audo track and lower the levels. And it only appears to be the music. Audio in the video clips comes out at normal levels and does not need adjusting. If anything I have to boost the video clip audio because it's too low. The songs I import are directly from CD's or MP3's from my music folder.
Its not a real problem as I can fix by constantly lowering each song but is there a way to set the preference to lower the output on the audio tracks? That is to see the level automatically set below the 0 line when music is added. Or is it something in the burn proceedure in MF7?
I am creating a "year in review" for a local fire company. I am trying to set up Video Studio Pro X5 so that when there is audio in the video clips the background music lowers in volume so that I don't drown out the audio in the video. How do I do this?
View 5 Replies View RelatedCan I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies View RelatedHave just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies View RelatedI have ONE large 1hr AVI file captured from a DV camcorder. I have used Corel Videostudio to "split by scene", and that works fine, all clips are cpatured. BUT the shooting date for the clips are shown as the same date and time for all clips.
Where can I see the actual shooting date for each clip? I tried to use the old Win Movice maker on a WinXP machine, and here it works fine.
In corel VS I also tried to take one clip in the middle of the file and used the shared function to create an DV AVI file. This file I imported to VideoStudio - and now the date and time for this single clip is right. Unfortunately if I a convert all clips into one single file again I still have the problem.
In the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies View Related
