I created a project parameter (in order to group my sheets with my custom system) and I'd like to create a label on my titleblock that's the ability to show this project parameter atomatically.
I reckon it has something to do with shared parameters but how to use them.
Does the tooltips on Label Parameters can be modified? I would like to customize the tooltips on label parameters, which currently default to "Edit Parameter"...lame-oh; that tells the user very little. Perhaps the developers could add a customize tooltip control in the Edit Label dialogue box. Can the tooltips be accessed through the database?
View 2 Replies View Relatedquestion...how to make Structural Slab TAG?...
all I can see was structural foundation structural columns and framing
then if i try to make them...i can't find a label or parameter on determining its thickness...T_T
I need to create a new parameter in label text, (example: adress number 2), so I did it, but when I load it into the project, i cant write anything, its just a question mark.
View 2 Replies View RelatedHow do I set up a Project Parameter to reference a txt file as a data set? (the same way CSI division codes are referenced)
View 4 Replies View RelatedIs possible create a URL project parameter associated for revision clouds?
I want to make a hyperlink into a revison cloud for a DOC file, but I not found the Revision Cloud category in Project Parameters/Parameter Properties dialog.
I search for this solution because I don't know the limit size of the parameter Comments. I wish add many comments on the project and these can have texts and images, so I choosed put comments in a DOC file.
We use electircal elements in AutoCAD dwgs that have labels to indicate the status of the element by phase. For instance on a floor plan we might have elctrical outlets that are existing (E), new (N), demo (D), etc. How does one do this efficietnly in REVIT? Is there a way to assign a paramter to grab the phase of the object and then adjust a label accordingly? This would be ideal because over time the element s might move from one phase to another such as from new to existing.
View 2 Replies View RelatedI created a custom template family for a 36"x24" titleblock. now, I need to create one for a 24"x18" template family. My issue is, what is the easiest way to do this?
I cannot copy and paste content from one family to another for some reason (unless I am doing something wrong). I was thinking the easiest way is to copy the family, rename it and move the content around so that it becomes a 24"x18" template - BUT - does this affect how it plots?
I have Revit 2012. Trying to import a titleblock from Architectural Desktop 2006. When I follow the User Guide guidelines I get to step 3 and then this message:
"Import Geometry Not VisibleThe import geometry will not be visible in the view using the current settings.The origin of the import will be centered on the origin of the model instead. You can view the import in any view where its geometry is within the extents." The ZF command only opens up the Import CAD formats window. The original titleblock is in modelspace of the dwg file.
My titleblock seems to be corrupted and I can't edit it. I need to edit some text on it (highlighted), so when I am on the sheet view in the project I select the titleblock and click 'edit family.'
When I load it into the project I get this error. I would happily create a new titleblock, but I this is used in many places, so I need to edit this one. I tried to upload my Revit Error Report, but this forum is saying it is not a valid extension.
I have been having this issue in both Revit Architecture 2012 and 2013. I have loaded in my parameters for my title blocks ("Addition", "City, State, Zip", "Address", and "Lot#/Block#) in the same way I have done it in any other project. but for some reason in this project after I have loaded in my parameters and set them to my sheets and I am still not able to select them and edit them on my sheets.
View 1 Replies View RelatedIs there a way to print an area larger than my titleblock, so that I can include the border defining the edge of the paper in the final printed pdf?
My workflow requires me to open the pdf in illustrator and make adjustments before a final print. I need the boundary printed so that I can scale the drawing inside illustrator back up to proper size.
Maybe I need to make a custom titleblock with a larger boundary?
I want to add parameters to my projects for consultants (type, name, company name, address, etc.) in a way that isn't deleted by updating a titleblock.
Currently my consultants are just text objects in the titleblock family that are not saved back to a default titleblock. If I reload the titleblock they get replaced by whatever default text was part of the default titleblock. I also have different titleblocks for different sheet types within the project, for example cover sheet, sheet, sketch, etc.
What I want is for this information to be part of the Project Information so I can make changes there without editing the titleblock family. I want them to function like the parameters for Client Name, Project Address, etc. and catagorize them in some generic way like Consultant A, Consultant B, etc. because not every project will have civil engineer or sprinkler designer.
I got as far as trying to create a lable in my titleblock family but when I tried to add a Category Parameter for the first lable, let's call it Consultant A Type, I get a mostly grayed out Parameter Properties dialog where the only clickable option is to select a Parameter Type, all of which are grouped under IFC Propertires and non of which seem to apply. There's no Project Information group. How do I create these lables and parameters?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I'm trying to create a titleblock family that has an image or dwg of my site. The easy way to do this is save a new family and import a cad file or jpg of the site plan.
However, I'd like to avoid creating a new titleblock family for each project with a new imported site image.
I thought I would be able to just make the image's "Loaded from file" address an editable field that could be updated in the project info like all the other parameters, but it doesn't seem to be possible.
I'm trying to add a scale ruler to a title block and I would like it to change automatically with the scale of the views placed on the sheet. Is this even passable? I have attached a picture of the scale rule, I have made it as a symbol and the numbers are the only thing that change between the types.
View 1 Replies View RelatedIs it possible to change the Revision Number as starts from 0,1,2,....... in Revit Titleblock.
View 1 Replies View Relatedis it possible to have a label set to a parmeter so that after inserting a block I can see what each parameter is.
the label could just be there or show when the cursor is over the parameter symbol?
autocad 2007
windows 7
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
I have been successfully able (after reading through the Users Manual) to create a new door style and a new property set definition applied to that door style. I was able to insert the new door style in a drawing and the Extended Data tab on the Properties pallet on the right side of the screen showed all the propwer data, except for one field.
I used two parameters from the Project Properies Definitions in my "custom" property set but only one of them (Number) seems to be working as expected to contain my Project ID Number within my door style. The Division ID parameter, however, does not contain anything within my door style except "NA", even though I placed a value in the Division ID field in the Project Navigator Tool Pallet.
"NA" is what shows up in the field on the Extended Data portion of the Properties pallet for the selected door instance.
As an aside, I found writting this post to be very time consuming because I had to keep refering back to the various ACA screens and pallets to be sure of using the correct names for everything to avoid confusion. Hopefully I have succeeded!
I have been working on creating windows for the place I work. I want to make my windows so they are quick and easy to create new ones without having to add in new information like if the glass is tempered or if its an egress window. I would like to set up formulas for these. I am stuck at my egress window parameter. I have included an image of what I am working on and the calculations and formulas I have so far. I would like to have my egress check box to say yes if the Opening Width is greater then 20", the opening height is greater then 24" and the opening sf is greater then 5.7 Sf. How would I set this parameter up?
View 3 Replies View RelatedI've created an area schedule that divides my plan into seperate appartments. I would like to sort mu window schedule by this parameter- is there an option to link a window to a specific area, just like it's linked to floors?
View 1 Replies View RelatedHow I can get the finished floor material from the floor in the room tag? The only way I know is to manually write material via Change Parameter Values in the tag.
View 2 Replies View RelatedI am able to get the parameter to appear on the project information tab, but I cannot get the information to appear on the sheet. I would like to create a phase parameter on the sheet so that different projects under the same building will be specific to the project and not just the building.
View 1 Replies View RelatedIt is possible to create a Parameter with the Filename? I have only found the FilePath parameter...
View 2 Replies View RelatedI have set 2 parameters in the Family Editor so they 'Group Under' Dimensions, yet when I load into a project (that the family object has been deleted out of via the Project Browser), I find instead they are Grouped under 'Other'.
One of the offending objects attached.
I've done this 2 ways, once by opening within Revit the Family Editor, making the change and then loading back into the file, only to find nothing has changed, and also then by again opening up in the family editor from Revit to find ditto; and separately by opening up the file directly in Explorer and then loading into the open project.
Not an enormous problem, just annoying as I want to group Dimensions parameters naturally enough under Dimensions!
I find the visibility parameter a very useful option when building families. Unfortunately it doesn't work when exporting IFC. The elements set to not visible are visible in the IFC exports.
I also experienced IFC export issues with the use of phases.An element created at phase 1 and set to demolished at phase 2, will not be visible in the IFC export of phase 1.
The IFC Exporter for Revit 2012 v1.0.4.msi was used when running into these issues.How to be able to have correct IFC exports using the visibility parameter ?
I am using Revit 2013 and I am trying to create a text parameter for my windows that will tell you what grid is installed in the window according to which grids you choose (from my parameters above) I have included a picture to better show what I am trying to do. So far the parameters i have tried to use don't seem to work.
View 2 Replies View RelatedIs it possible to convert a numeric parameter to text so i can add it to another text feild? I cant seem to find a way to do it.
View 2 Replies View Relatedwhen I insert a window family the cut plane Revit uses is that of the family rather than that of the view. This causes a lot of problems for us when we need to cut the same window at different levels in different views and the window itself should look different. The window itself is built to look differnet at 3 ranges of cut plane height. However, if I try to control this throught yes/no visibility parameter it affects all views. I fail to make it view specific. Is there any way to make an instance parameter or view specific parameter for the cut plane/ visibility of parts in the window family. It is such a basic need for architects and I fail to understand its absence in the Revit. Generaly speaking one should be able to control what you see in each plan section view. It's an essential thing in architectural drawing.
View 9 Replies View RelatedI wonder if we can play with a revit family file ; for example modify parameter values without opening revit.
View 2 Replies View RelatedI need to constrain a handle to a butterfly valve and add a parameter for rotating the handle angle. I can't achieve this as when I constrain the handle to the valve the handle will not rotate without breaking the positional constraints.
I've tried looking at the door swing posts but they don't use circular objects and I can't get them to work for my valve.
