Revit :: Predefine Room Names With Identity Data
Oct 23, 2012
I do a lot of cookie cutter type buildings with pretty much the same room names and finishes for each building. Is it possible to predefine the room names with the identity data (to incl. base finish, floor finish, occupancy etc) in my template file and then just select this as I place the rooms?
I have tried creating the room with the identity data but all I can do is select the room. The predefined identity data does not translate to the new room number.
For example:
I create a room called 'Room Test 1' with a base finish, ceiling finish, floor finish and wall finish. I then go to place a room on the drawing. I can select 'Room Test 1' but all it does is add another 'Room Test 1' with a different room number and no identity data.
View 1 Replies
ADVERTISEMENT
Feb 28, 2014
How to create a parameter field to include the MasterFormat data using 'txt' file similar to Assembly code parameter already built into revit families. I don't want to use the Keynote field for this purpose. I am looking for a ways to create a new parameter under the Identity Data.
View 1 Replies
View Related
Feb 25, 2014
Is this a Revit Hard Code issue or am I overlooking something? I have created some In-Place Masses (with floor mass for each level) and I have created 2 Project Parameters for for the Mass Schedule. Parameters are Block and Sub Block as Text under Identity Data and in the Mass Category. When the Mass Heading is ticked all mass categories are ticked. So Im thinking, it should not matter what type of Mas schedule I setup. The Parameters should be available in the fields.
The Schedule is created as a Mass Schedule. and the Parameters show up in the field and data is populated as I expect.
I want to create a Mass Floor Schedule and the parameters are not showing up in the fields list. Also I can not Add Parameters from the Schedule dialogue window as those Parameters has already been created. When I select the Mass Floor in a 3D view the Identity Data fields in the Properties window are mostly greyed out. The Project Parameters do not appear as Identity Data fields and the Edit Type is greyed out (not that Edit Type maters but it adds to the thinking process)
View 8 Replies
View Related
Dec 13, 2013
I linked a revit file of some renovations that had been done into an older revit file. This worked fine accept it did not transfer the room data over. When i try to put new rooms in they take the volume of the older rooms not the renovation imports. Why? Why? and why?
Even if I draw out the rooms when i place the room they are still separated and defined by the older room dimensions. Thats not cool that is sad?
View 1 Replies
View Related
Jan 16, 2013
I am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies
View Related
Aug 30, 2012
I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies
View Related
Jan 2, 2012
I know how to create a block and all that is fine, but looking for detailed simple lesson on how to create a Attribute. ( I guess thats what they are called). For instance, drawing a floor plan with different room names and etc, I know there is a way to make a circle or polygon, or square and then when it is inserted in the drawing, you just have to type the new name of the room, or the window symbol, or door number and etc.
By the way, I am using a student version of AutoCAD 2010. Also, if you could also add the keyboard shortcut alias's too would be a great deal.
View 2 Replies
View Related
Oct 3, 2012
create a tag for a group so can add on Identity
View 5 Replies
View Related
Feb 22, 2013
I would like to display the room name and area as text from a spaces i have created. Like a room tag that will automatically update if the space is altered.
I have tried a number of ways but have been successful and the solutions are often overly complicated.
I have since given up and simply entered text and included a field for the space name and another field for the base area however this is quite laborious. surely there is a simpler way of doing this.
I would also like to include occupancy numbers that would also calculate the m2 per person if that is possible?
View 2 Replies
View Related
Feb 7, 2013
I works as a lighting designerand I just purchased Revit LT in order to meet some 3D-project managment requirements. I find the lighting fixture families to be very useful and simple to work with but I need some way to identify the fixture types used in the project without acctually clicking each fixture when in plan view. In Autocad 2D i create an text attribute which I block together with my 2D-symbol, is there any way to do a similar action in Revit? I tried to group my 3D-symbol with a text, but that dident work out to good when moving and copying the symbols.
I imagine al types of diciplines would need a similar action to keep track of what is drawn?
View 3 Replies
View Related
Nov 28, 2013
I want get the rooms dimenstions, for calculating the width of the corridors.
View 1 Replies
View Related
Mar 26, 2012
I am using Revit Architecture 2012 and I am trying to create a Room Tag. I have attached the file below. I want the tag to read the room name and the room dimensions. Then I would like an option to turn "Unfinished" on and off. I can get this to work as long as it is a type parameter. When I load it into the project it works well and everything is there. But if I change it to an instance parameter (which is what I want) then when I load it into the project the option to turn the "Unfinished" on and off has disappeared.
View 1 Replies
View Related
Nov 16, 2013
My leader for my room tag is waaayy far away from my tag. The leader/border offset is set to 0, but that doesn't resolve the issue. (the leader and tag are in blue on the png)
View 2 Replies
View Related
Oct 4, 2012
Can’t edit the room tag,when it comes to edit families in the Revit. For example, the tag of the room has a “rectangle” but in the edit mode I can’t find it.
View 6 Replies
View Related
Apr 30, 2010
An architect sent me his revit file, it contains the full model and all the floor plan views and drawing sheets. He has floor plan views set up for each floor and some enlarged views as well. On each floor plan view each room has a tag that contains room name and room number and every door has a tag that contains the door number.
When I create a new file and link in his file so I can then start working, doing what we need to do, adding devices, etc. The problem is, the architect's room tags and door tags dont link in, and if they do I cant see them. I've gone through every possible combination in the visibility/graphics options to no avail.
Room and door info linking in should be a basic function of revit; how could autodesk expect mech, elec, plumbing engineers to create drawings that have zero room and door info?
If it matters, I'm working in Revit 2010.
View 6 Replies
View Related
Aug 15, 2012
I have been dealing with a tolerance issue when trying to create room area calculations in Revit. There seems to be a tolerance that is set to somewhere under 9" if two walls are to close together it will ignore the area.
Although if you are using the area calculation this tolerance is set much finer. and it seems to work just fine. I have already tried to create a multicategory schedule but cant combine rooms and areas. I have attached an image .
View 3 Replies
View Related
Feb 3, 2014
I am trying to add a normal, regular, editable text box to a Room Tag. Our office is involved in a competition and we want to show the Room Name and Area (which I understand how to do and have done that) and also the required square footage that was given to us in the competition project description. Here is an example:
STUDENT SERVICES
1252 SF
REQ: 1160 SF < This is what I need to know how to do.
Once the Room Tag is placed, I want to manually be able to change that number as it pertains to each program. Is this at all possible?
View 2 Replies
View Related
Feb 20, 2014
I am working with room tags that has multiple yes/no features. my problem is its hard aligning text because they wont snap to centers or refernece lines. How are people working with this. It causes for sometimes the leader line when used to not want to be straight or leaves some funky angle when change scale
View 1 Replies
View Related
Jul 26, 2013
I have a rectangle (looks like a label border) showing up in my room tag. It's a simple tag taken from the OOTB room tag family. I'v re-edited the family, checked the parameters and values. All label borders are off, but this one looks like its either part of a separate, invisible label or a separate rectangle that I can't find to delete.
View 2 Replies
View Related
Sep 4, 2012
I have a third floor view that continues to show the 2nd floor room fill colors, despite the fact that underlay is off. Floor 3 is visible and present (though) I can't grab it because I don't control that work set. The third floor room fill is not visible unless I make the cut plane 10'. That suggests that the 3rd floor is out of place, I think. But it seems fine in section.
I can't figure out if this is a bug in the view range or a problem in the model.
Note that the upper range is 12'2". The bottom of the range is offset 4' to show a parapet/roof of an adjoining structure. The clip depth is not effecting the visibility of the 2nd floor room fills at all, though it does effect the 3rd objects like the parapet.
I would think the clip depth would get rid of a lower floors room fill, which I assume is associated with the floor object.
View 3 Replies
View Related
Aug 30, 2012
How do I change the amount of characters available in a Room Tag for the Room Name? What is the limit and can it be increased?
View 1 Replies
View Related
Jan 28, 2014
I want to be able to add rooms through the schedule prior to placing them in the model. I thought I would be able to do that by going to the Modify Schedule/ Quanties Tab and clicking New in the Rows columns but the new option is blanked out and not selectable.
View 5 Replies
View Related
May 28, 2009
I want to use a room tag to calculate my occupants based on the area of the room divided by the occupant load factor. The room area would be pulled from the room, the occupant load factor (OLF) would be manually input by the user. Once the OLF was input a formula would take over and give the number of occupants. Is this possible? I know it can be done in a schedule but I would like to put it into a tag for a code study. Eventually this tag could be expanded to provide other information such as required exit width from the room.
View 9 Replies
View Related
Oct 2, 2008
I have one room on a plan whose color fill will not appear, while all of the others do. I have tried deleting the room and adding a new one to no avail.
View 2 Replies
View Related
Mar 2, 2010
I want to modify the Room number label so that the rectangle outline displays smaller (less wide).
The rectangular box for the room number doesn't show up even when you open and try to edit the family, nor any parameters show up. How do you modify this box and make it smaller?
View 9 Replies
View Related
Nov 29, 2010
Is there an option in Revit Architecture to make the room tag show up on multi lines if its more than one word? This option is available on Autocad Architecture
View 2 Replies
View Related
Nov 7, 2013
Is it possible to get the room boundary line in a curtain wall to be set to the inner face of the mullion instead of the inner face of the glass?
I have looked at the System family library but cant find a setting for changing this.
Also, setting the location line is greyed out. Why?
If I draw clockwise I get the location line on the inner face of the glass even if the greyed out location line setting in the options bar is set to center.Why?
View 5 Replies
View Related
Nov 2, 2013
Using Revit LT 2014, I'm trying to make the colours used for a room colour scheme transparent. Is there a way of doing this?
View 6 Replies
View Related
Dec 9, 2012
how to generate list of equipments with room name and room number set in linked Revit-model?
View 4 Replies
View Related
Sep 18, 2012
I'm having issues with positioning room tags.
When I try to position my preferred tag in some, mostly, small rooms I get an out of room error.
I assume this relates to an insertion point over which I have no apparent control which can be clearly seen, a green line, when trying to move the tag - see attached screen grab.
View 4 Replies
View Related
Jan 28, 2013
I have a load-bearing masonry wall in an existing building where I need to remove a portion of it to make two rooms into one. The wall will only be removed so that it is above the new ceiling. How do a create an opening in it that is not room bounding? I have a wall opening family, but you cannot choose whether or not they are room bounding. This only works for walls.
View 7 Replies
View Related
