Photoshop :: Trouble Reinstalling Photoshop Cs3
Feb 13, 2009
Recently, cs3 has stopped working for me. One day I tried to open it and it wouldn't respond. I tried uninstalling it and then reinstalling it and it didn't work - it says failed to install Adobe Photoshop CS3. All the shared components reinstall, but CS3 doesn't.
I downloaded the trial version of CS4 to see if that would work, but again it told me that Adobe Photoshop CS4 has failed to install. And again, all the shared components managed to install.
View 1 Replies
ADVERTISEMENT
Apr 11, 2009
I've been using the same computer for 7 years and have had many and struggles reinstalling the operating system and all my software from time to time. Today, the struggle is with reinstalling Photoshop CS4.
- I just installed Windows XP Professional with Service Pack 3.
- I reinstalled Photoshop CS4 but every time at launch it says: ...
View 4 Replies
View Related
Oct 13, 2008
Using CS3. Computer is fine and everything was working up until a few minutes ago. Now everytime I try to save as the dialog box disappears and the program menu bar grays out.
View 1 Replies
View Related
Jun 8, 2006
I have a box I made with the square selection tool. I added a 25 px feather to it to give it nice rounded corners.
I did a paint bucket fill inside the selection and it doesn't fill JUST the insides like I thought it'd do. It does MOST of it but it blends outwards towards the sides of the selection so it's not one solid color.
ALSO when I flood fill a few times, it EXTENDS passed my selection box into the rest of the window!
My question is, how do I make a selection box with rounded corners flood fill COMPLETELY?
View 5 Replies
View Related
May 26, 2005
I've created a webpage in phtoshop, done my rollovers in image ready and transferred it into dreamweaver.
Now when it's on my hard drive it's fine and works - but when i upload it none on the images show up or they do show but when you put your cursor over a rollover all the images diassapear (they all turn to red crosses).
View 3 Replies
View Related
Aug 26, 2004
I've made animated .gifs before without this problem: I have taken 12 seperate .gif images, converted them to RGB mode, dropped them all into the same Photoshop file, and then jumped to Imageready to create frames for each layer. Upon clicking "Save Optimized As", I get the following warning:
"Because JPG, PNG, and WBMP do not support animation, Imageready will save only the current frame."
I don't understand what I've missed. All 12 original images were .gif. I had to convert them to RGB mode in order to create a 12 layer file, but don't think that is what is causing this issue.
Any ideas?
View 3 Replies
View Related
Jan 30, 2005
Recently I got a new computer and I had to reinstall Photoshop 7. Before reinstalling it, my font came out smooth and such.
View 3 Replies
View Related
Jan 15, 2008
I am a beginner with using photoshop. When trying to use Filter>Render>Clouds it is faded and I cant use it. I have tried looking with google, but I did everything but it was still faded.
View 3 Replies
View Related
Jan 20, 2005
When adding a gradient to a canvas that has a selection why do I see an outline around my selection when the gradient is applied? What can I do to eliminate that outline.
View 6 Replies
View Related
Feb 14, 2009
im designing a tshirt for a client and i am drawing something in black using the paintbrush tool. i messed up because i forgot it needs to be dark brown. to use paint bucket makes the images lines distorted and "fat". is there no way to just take the black i drew by itself in its layer and turn it all another color without messing it up?
View 2 Replies
View Related
Apr 11, 2006
I'm trying to create an action with an F shortcut, so when I save a file that I've edited, it saves it with an '_ed' after it.
When I've done the action, it just changes the whole file name, instead of adding the '_ed'. I know there is a batch option for this, but I was wondering how I could go about doing this on a file by file basis.
View 3 Replies
View Related
Jan 4, 2008
I just bought a new laptop computer....I had Adobe Photoshop CS2 installed on my desktop computer...have not used it much at all. So, just yesterday I did the "Transfer Activation "thing". I did as instructed...Installed it on my laptop...(this new laptop is an HP Pavilion with 2GB, Intel Centrino, Light Scribe, and Windows Vista).
When I was through installing it (it said I installed successfully)....then I was told to register it... ...I did so...using my new address (of the laptop)...It told me It registered successfully.
I then proceeded to download updates....when all was said and done, and rebooted...said the updates were installed successfully as were the registration, and updates.
View 2 Replies
View Related
Aug 15, 2009
I'm creating a 3D text logo using CS4 Illustrator and Photoshop. I created the logo in Illustrator, and copied it into Photoshop to apply color using hue and fill settings. I used the wand tool to select the top of the letters, then changed the hue on the sides, then filled the tops with a different color. I created a new layer for the selected tops. I want a transparent background, and I want to save the file as a Gif. However, when I flatten the image, I get a white background. Somehow, a white background sneaked in. Also, when I go to save the file, there is no option for a .gif. I saved it as a jpeg. But then Dreamweaver would not display it. It only showed a samll icon representing the graphic, but wouldn't display it.
1. How can I avoid having my transparent background become white?
2. Why am I not getting the option to save as a .gif?
3. why Dreamweaver wouldn't open the jpeg? Could it be size? File too wide. In the past Dreamweave automatically resizes to accomodate wide files.
View 5 Replies
View Related
Jan 16, 2009
I bought this photoshop magazine, and was trying to follow a tutorial for scanning in an image. (btw i have searched for this, and found nothing). So I scanned it and opened it in illustrator, and did live trace and everything to get the outline, then I exported it as psd (as the tut. said), but when I opened it in photoshop, the white background was gone. It was an outline of my drawing on the gray and white checkerboard background. Now in the tutorial it said to use the magic wand tool to select all the white, and delete it (in illustrator) so I thought maybe that was it, but it wasnt. It still opened like that without deleting the white areas.
View 3 Replies
View Related
Jun 7, 2008
I have an image which is currently surrounded by a white background that I want to get rid of.
So far I have selected all of the background and hit delete, which appears to have deleted all of the white background as it shows up transparent.
However when I save the image as a TIFF an then open it up in Illustrator, the image still contains the white background.
View 2 Replies
View Related
Jul 6, 2004
I scanned several magazine covers (believe it or not I'm one of the few who still dosen't own a digi cam) and now want to place each pic/scan side by side or one on top of the other to resemble what a picture would look like if I had taken it with a digi cam.
Any ideas?
View 1 Replies
View Related
Jun 29, 2005
I use the line tool (U) quite a bit and for some reason now after I make my first line the next line i try to make is white/negative amd the line tool has the little minus mark (-) next to it. How do i reset it to the (+)? currently i am having to make a line, rasterize the layer and make the next line.
View 3 Replies
View Related
Feb 7, 2006
I was currently working on a project in photoshop, and i had a text layer I saved it as a psd to make any later changes, and now when i want to change the "text" layer it does not change, What i mean by change is when i click my type tool to change the spelling of the text the text is not slected instead it makes a new layer.
View 1 Replies
View Related
Jul 30, 2005
I'm in the process of prepping individual components of a design for Flash animation. I'm trying to apply a layer of #7C6844 with the color effect at 56% opacity and a layer of #999999 with the color burn effect at 12% opacity to the foreground image which has a transparent background. This task has proved to be rather impossible for me, but it seems like there should be a way to do it. I would use the wand tool > select inverse and apply the colors over top that way, but the foreground image has a lot of leaves and branches, so that method would be extremely tedious.
Is there a way I can select the entire image as a whole and leave out the background?
I'll attach the image and the desired result to further assist.
View 1 Replies
View Related
Mar 4, 2009
i had ps7, then cs upgrade, then cs2 upgrade
i have all the disks and numbers
i am going to a new computer
do i have to install ps7 then cs then cs2?
or can i just install cs2 (since its an upgrade will it install with no other photoshops already on the computer?
2nd question will i need to call adobe or will it activate ok since i believe you can use two computers with the license
View 5 Replies
View Related
Apr 28, 2009
I used system repair because PS had a problem (crashed after file open) and reinstalling didn't help. This time I get an error starting PS CS3.The error message is: The licensing subsystem has failed catastrophically. You must reinstall or call customer support. If I want to reinstall from the cd, its starts fine, but doens't do anything.If I start the setup from the cd, it does nothing.I tried windows - software - remove/reinstall, but also nothing happens. What can I do now? Is there a tool to remove PS?
View 9 Replies
View Related
Mar 25, 2008
I am planning on reformatting my hard drive and reinstalling the OS. I run
Vista business on my computer and the install is rather buggy. I am hoping
that a new install of Vista will solve the problem. I currently have
Photoshop CS3 installed on that computer. What do I have to do to reinstall
Photoshop. Do I have to contact Adobe or can I just reinstall the software.
View 6 Replies
View Related
Sep 4, 2012
I would like to uninstall PS CS4 on the same computer and keep the third party plugins in filters and goodies as well as my scanner twain without having to reinstall them. I seem to be having a problem with PS on my desktop but not on my laptop. Is that possible and if so how can I do it?Â
View 2 Replies
View Related
Aug 5, 2012
Resetting the preferences stopped Photoshop from crashing, but now I need the flash plugin. Can I get that w/o reinstalling CS3?If not, do I have to uninstall the whole suite before reinstallation?
View 6 Replies
View Related
Nov 18, 2013
cannot use Photoshop CS2 after reinstalling it on a new computer.
View 4 Replies
View Related
Sep 13, 2012
I had Photoshop 9 installed on an older i Mac whose hard drive failed, and on a Mac book laptop. I wish to activate on my new i Mac, but the program believes I still have installed on two previous computers. I do not have the old computer with the failed hard drive and there is no way to access the program on that unit.
View 1 Replies
View Related
Oct 8, 2008
Am using Photoshop 6.0. Had to retire an old computer, but want to continue to use the Photoshop 6.0 software on my new laptop with Windows Vista Home.
Have the Photoshop 6.0 Upgrade CD for Windows, have the Serial Number from the previous version (had registered it, and it was stored on the Adobe website), have my Customer ID#.
When I put the CD into the laptop, it asks for the previous media (CD) which I do not have. Unable to get past this point of the installation.
How can I install the software to my new laptop?
View 3 Replies
View Related
Feb 2, 2009
I have recently bought the upgrade to PS cs4 and installed it over my cs3 version. Shortly after this windows crashed & I had to reinstall windows XP but I can't seem to reinstall PS cs4 I get a 1605 message. If I just try to run the old program which still on my C drive the program opens and then I get a 147:20 message sayiong I have to reboot(w/o success) I would uninstall ps, but the program won't let me get as far as being able
to deactivate it.
View 5 Replies
View Related
Apr 22, 2009
I need to uninstall, then reinstall PSCS4. Do I have to deactivate before uninstalling?
View 2 Replies
View Related
Sep 30, 2013
I have a new computer with PsCC installed. Unfortunately, I have to have my hard drives reformatted and Windows 8 reinstalled, so I have to reinstall PsCC on this same computer. Do I simply sign in, download and install PsCC and Bridge again when my computer is ready? Will Adobe count it as a second installation or do I need to deactivate PsCC before I reinstall it on the same machine?
View 3 Replies
View Related
Sep 26, 2013
Do I have to deactivate my copy of CS6 before I do a reinstall of the operating system or, will it recognize the reinstall of the program (CS6) as legitimate and just install it with out any problems? I have never done this before with Adobe products.
View 2 Replies
View Related
