i have a logo in the top left hand corner of the screen with allot of white nothing around it.
I want to just save the logo with out all of the white, i have tried cropping it with the windows vista tool but it will not allow it.
I've just had my first 3D experience in Photoshop mapping a bunch of different label options onto a cylinder - everything was working perfectly until I re-sized the image.
Now each label change-out gets displayed as one of the labels - Photoshop will only display one label despite there being mutiple layers and layer comps.
If I:Go to the diffuse texture for each label and choose "Edit texture"A new window opens showing the correct label/texture.
When I copy and paste a pdf document into Corel Draw, it seems as the default size of the pasted object reflects anywhere from 23" (left to right) & 17" (top to bottom) = 23"x17". After selecting the object, & entering an object size of 8" x 11", the document then resizes to 2"x3". So, then I always have to enter the 8"x11" again for it to finally accept that size - which it always does, but on the 2nd time trying.
View 15 Replies View RelatedI need to be able to re-size images that are large than 1MB in order to put them on our MLS site.
My previous computer had 2 arrow icons on the desktop.
One was for re-sizing horizontal pics and the other for re-sizing vertical pics.
I could simply drag/drop the image file onto these re-sizing icons and they would be re-sized.
The smaller file size thumbnail would appear on the desktop.
How can I get these re-sizing tools on my new computer's desktop?
I am using CS6.
I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Relatedas of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
The code below crashes with an "attempt to write to protected memory" in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View RelatedHow can I resize an image (make smaller) without losing its detail or quality?
View 1 Replies View RelatedI am doing an animated theme for my girlfriend`s new handset. I have imported a small clip using imageready. The problem I now have is that I only want to use a certain (smaller) part of the picture. I can do this using the select option in every single frame, but isn`t there a way to select the part directly in the gif so that the selection is made in every frame??
View 1 Replies View Relatedhow do I make the small black resizing squares appear for example if I create a text element, how do I resize it using the 4 corner black boxes, I can't see them... Or if I copy and paste something into a new image, how do I get the rezizing boxes to appear?
View 2 Replies View RelatedLets say i want to resize something to 5x7 how do i do it ? i usally go to image resize but the problem i get is that i get like 5.679 or something when i change one the other one changes any ideas?
View 4 Replies View RelatedI designed a form in photoshop for somebody. I chose A4 size for the canvas from the preset sizes, but the problem is that I need to send it to the other person to print (I don't have a printer and they don't have photoshop).
I thought I'd save it as an image and send it to them to print out, but the image is huge (image->image size shows the document size as 21*29.7 cm but the pixel dimensions as 2480*3508 px).
My only choices (in the dropdown box), for changing the image size requires me to use either pixels or percent.
I'm a bit confused as to why A4 size isn't A4 when you convert it to an image. Please could someone give me some pointers as to how I can change my PSD to an image that is A4 size,
I am trying to get the images on the website to look as sharp as it does when I finish them.
I have tried resizing but I am missing something and the lose quality.
how do I resize an image in a layer by dragging it with the mouse? Can I get it to resize while retaining its original shape? I wanna fit some things together visually and I don't wanna screw around with numbers.
View 3 Replies View RelatedI have drawn a few rectangles but want to make them all exaclty the same size and in certain positions. how do you view/change the height, width, x and y positions? In fireworks, the properties pane at the bottom shows the exact measurements and is easy to change. How is this done in photoshop 7.
View 1 Replies View RelatedUsing Photoshop CS6, is there any way to make the up and down motion of control+option+pen ALSO control brush size? I keep making erroneous minute up/down changes to hardness or opacity while resizing left and right.
View 5 Replies View RelatedI am trying to resize a mask in Photshop CS6 and everytime I try to scale it the mask disappears and I cant see what Im doing. Is there a setting that I need to change so that I can see it?screenshots of what is happening when I try & resize.
I have the mask visible in the first screenshot. And the 2nd screenshot shows how it disappears when I try to resize.
For years I was using an older version of PS. I am new to CS6 Photoshop. I cannot figure out how to resize a text box. When I chose the box with the text tool, the borders of the box do not show up. To see the border I must hold down the option + command keys. I cannot change the size of the box without scaling the type.
Also, when I click the box with the move tool, I cannot see the border of the text box. I cannot even copy the text box.
I can not resize my pictures once i insert them into my job nor can I resize my text box.?
View 3 Replies View RelatedAfter upgrading to Mountain Lion Photoshop CS4 won't allow batching several images to certain folders on our servers.
Photoshop message reads;
The destination is not writable (read-only).
This is something that I've been able to do without a problem in the past and now something has happened where it no longer works. When I insert a picture either into a new blank file or onto another picture and then click on the new picture to resize, it appears that the tool sees only the original document and not the photograph that I've just dragged onto it. It does not show the dotted line selection or the resize handles. Also when I try to use the resize menu option in either canvas or image option it changes the whole document and not the new photograph.
View 1 Replies View RelatedI would just like to ask coz' I love to make icons but I have a problem resizing them by 100x100. I'm using Photoshop 5.5 is it possible for me to do so?
View 1 Replies View RelatedI am using photoshop 7. Is there an automated way to resize many pictures at once?
View 3 Replies View RelatedI am trying to resize my digital photos to the normal 4x6 inches for printing, but when I enter the parameters to resize, either the width or height automatically changes and I can't get it to 4x6.
View 5 Replies View RelatedHow do u resize brushes?
Mine are big. i want to make them smaller.
I have Photoshop 6.0
This has been "bugging" me for a while.
1) Open a raw file (.CR2)
2) output the file to JPG or open directly
===> i.e. the resulting image is 3888 x 2592
3) use Automate > Fit Image
===> i.e. 1200 pixels (reducing the image by a factor of 3.24)
======> The result should be 1200 x 800 pixels
However the batch conversion would be result in 1200 x 801 pixel.
Even if I were to add a step 2.5 as follows
2.5) image > image size > 1200 x 800
After automate > Fit Image (1200) it would still result in 1200 x 801 pixels!
What's broken with photoshop?
The only fix I've stumbled across so far would be to use an external programme to strip all the exif and attached metadata, only then would the "Fit Image" script work.
Having one extra pixel doesn't really matter most of the times, but it's does get on my nerves.
Advice sought: How can I fix this?
I've about three hundred images that I want re-sized (they're currently around 3000 pixels wide).
Is there a way to re-size them all at the click of a button? Can I for instance record an action, and then apply it to all the images at once?
I'm trying to make a desing for threadless.com. The problem is resizing my desing for the submission. There is a four color limit so the best I've been able to do is pick "nearest neighbor" for resample image.
This keeps it at four colors, but it looks really bad. Anything else I've tried blures design and makes it too many colors. Does anyone have any other suggestions?
My question is how can I shrink down a layer (of a car for example) and then enlarge it again without the car beeing pixelized?
View 2 Replies View Related