I have recently started to take up wedding photography and i was wondering how to put my company name on my prints as to proof them so they cant be copied.I have done it individually and it takes forever is there a way that i can do them all at once, as i usually take 300-400 photos.
View 4 RepliesI am trying to get a ICC profile to appear as 'Device to Simulate when soft proofing in CS3. This ICC file is from Adoramapix.com, to simulate their printers. When I drop down the list of 'Devices,' there is a older Adoramapix prifile, but I can't seem to get rid of it or remember how I added it?.
I have already right clicked on the ICC and selected 'Install Profile.' Not really sure what I was doing, but I also tried to add it under Display Properties>Advanced>Color Management. But I would get an error 'This is a printer profile which cannot be associated with this monitor.' I do have a canon printer at home, but never use it for printing photos. Anyone have an idea of how to make this ICC profile appear when soft proofing?
I. Per the instructions of the printer who's printing my work, I've converted my image profiles to Dot Gain 20%. I would like to make sure that what I'm seeing on my screen will a) be a close match to what she (the woman printing the work) will see on her screen; and b) give me a sense of how the printer (Espson Stylist Pro 4800) will interpret and print the work.I should change my Proof Setup to Dot Gain 20%, no?
II. I also need to make a set of jpegs that will be seen on a variety of screens, each of a different make and calibration. These jpegs need to be as convincing a match to the print as possible, with allowances, of course being made for paper, ink, etc. The match has to be close. Is there a standard for softproofing that will allow me to see what's likely to appear on a given screen. A tall order, I know. Wondering if I should just inform the viewers to view the jpegs with their monitors set to a certain color profile--or if I should send them a monitor profile along with the jpegs.
having problems getting consistent archival inkjet prints from the places I have tried. I am now looking at 'soft proofing' which I suspect is not without its pearls. The problems I experienced before where the images were not converted to the correct profile was that sometimes they would print out,
at great cost correctly and sometime they would not, again at great cost. If the image is converted to the correct colour profile, in this case Hahnemule, will the embedded profile that the image will be printed out consistently and 2 different days?
If I adjust hue/saturation to turn off the warning indicators when soft proofing is ON for sRGB, is the result on my calibrated monitor screen the colours that are sent to Blurb via Book module and the colours that will print? I read forums stating disappointing results in Blurb publishing through LR4.
View 6 Replies View RelatedWill Lightroom 5 haveCMYK proofing?
View 2 Replies View RelatedPhotoshop CS6 on Mac.
Edit an image file and get it to where I like on the monitor.Duplicate the file and set the new file to the profile for the printer which will be used, by using View > Proof Setup > Custom and setting an imported printer profile for the printing company that I use.
Edit the soft proof file to get it to where it looks good again. Save off the file for the printer and also save the new PSD file.
Close the PSD file.Reopen the new (soft proofed) PSD file.Still looks good, but.... when you check View > Proof Setup it's now generally set to Custom: U.S. Web Coated (SWOP) v2 instead of to the imported printer profile which was set previously. WHY???? Where did the printer profile go? Is it supposed to do this?
If I then reset View > Proof Setup to the correct printer profile, the image goes to crap again.
I am working in LR4 with soft proof. I set up a photo but somehow got "caught" on the screen in the Develop module. My photo is on the screen after working with it, but I cannot budge it and when I go to print it thr Print module is blank and I cannot print the photo. How can I get out of this bind?
View 4 Replies View RelatedI soft proofed several photos for printing. I came back to print another copy and the virtual copy proofing copy was gone. There used to be 2 side by side. Now to print do I have to readjust?
View 3 Replies View RelatedACR 8.1 allows CC users to soft proof in CMYK and LAB color spaces. LR 5.2 will have ACR 8.2 capabilities, so will we be able to soft proof in these spaces as well?
View 6 Replies View RelatedWhat's the best way to model a concrete beam that has the fireproofing in it?
View 4 Replies View Relateddefinitive function and use of the X/Y split colour numbers in the LR soft proofing histogram?
It's the only function inside of Lightroom that I can't figure out - is it a point sample between original and proof, or an area sample?
And whatever it is, what are you supposed to do with the info; you can't "lock" a sample point a la Photoshop can you.
There must be some prescribed method of usage for the info, otherwise why is it there?
I was wondering if there is a way to do batch processing for soft proofing different pictures similar to the sync functionality? I created a customer user preset however it seems to copy over the existing settings vs updating the +/-'s in the different areas. For example, I have a bunch of photos from different scenarios, events, actions, times, etc..
When I am soft proofing to a custom profile, looks like I just need to apply a few universal tweaks to WB (+100), exposure (+20, maybe +30), contrast (+10), blacks (-10), and clarity (+10, maybe +15) to get the soft proof copy to look like the master copy. Then I can quickly go through the soft proof copies and check.
Also, is there a way of creating a soft proof copy of all the pics in the develop module at once?
i'm new to all of this and i've got a couple of questions. i'd like to export (from lightroom 3) a file of a little over 100 images for proofing by a client. a) i'd like them watermarked on the website i send them to --how do i do this? and b) how do i remove the watermark on the images that i have that i want to make prints from? i'm terrified of doing something that i can't take back and ruining the photos.
View 5 Replies View RelatedI cant check the box for Simulate paper & ink, when soft proofing is on. Im using Lightroom 4.1, with a Windows 7 PC
View 1 Replies View RelatedWhile I can use the "S" key to access softproofing, the checkbox doesn't show on the toolbar and the the option simply doesn't appear in the toolbar pop-up either!
View 2 Replies View RelatedI am running LR4 and CS6 on an HP desktop with 4Gig Ram, Win 7 Home, Profiled Monitor using DataColor.
In CS6, all my loaded ICC printer profiles appear when setting up the soft proofing...
In LR4, most of the profiles do not appear...
The problem is that I print to an Epson 7600 CMYK printer with UltraChrome Ink and mostly on Canvas so I need to proof for that environment.
I am trying to utilize my nearest costco to print some images from lightroom 5. I am getting back dull washed out prints.
Facts:
I shoot in RAW in manual mode
I am using sRGB when I do my post processing
I export to jpg for printing
I used the costco LR5 plugin from Alloyphoto to upload to Costco
I have installed the printer profiles from drycreek for the specific location/printer and have chosen the correct profile as I export
I made sure that I chose to have Costco NOT autocorrect the color
Even when I use LR5's soft proofing, I get the same result on my monitor
I checked the print I got back and it says that they did NOT autocorrect (taken with a grain of salt)
The machine they are using is a Noritsu QSS-A, so I know my profile is correct
I have attached a screen shot of what I am seeing.
Why am I seeing this on my soft proofing as well as my prints?
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
When soft proofing, I split the image horizontally and then create proof image when asked after making first alteration.However, in both LR4.4 and 5Beta, both the original and virtual (i.e., proofing image) change.
Have l Brightness value of 55 in original. Proofed image is duller. Increase brightness in proof by 10 to match original. (Figures are just for explanation) Now when I compare images again, original image brightness has increased by 10 also. This can be seen, of course, on the Develop panel.
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View Related of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies View Relatedwhen I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies View RelatedI am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies View Related