I am using Photoshop CS3 and have created an animation in which I have exported into a movie w/o any compression.
This animation does contain text.
I am concerned that when this is projected onto a large screen the text will become pixelated. is there anyway to ensure that pixelation of the text does not occur.
Is there any way to make scrolling text/animations(falling snow, ect) on paint.net? Like, no html css?
View 2 Replies View RelatedI've imported the PSD file as a comp, and made changes to the text animation, but this is now a nested comp, and the music is in the main comp. How do I change the timing of the nested comp while still having visibility of the music track?
View 4 Replies View RelatedI have a circle which is rotated 45 degree around the X-axis. If you look at it from the top (normal=0,0,1) it will look like an ellipse.
I want to draw a new entity (ELLIPSE) that will have the same shape/look as the circle viewed from the top, but the whole entity must have z=0.
Basically, exactly what the command FLATTEN does.
Is there a way to do this easily? Or is the only way to figure out the math behind it?
I need to project the yellow splines onto the green dome shape in the attached max file. Shape merge has failed.
Screen shot to follow. Max2010dome.zip
I need to project some of the points and figures to the profile view and I'm not making any progress. I found the ProfileProjection class in the object browser, but I'm not sure how to handle the first argument (ByVal unmanagedPointer AsSystem.IntPtr,) or even if I'm on the right path. I'm guessing that it should work similar to other Create() methods by referencing an ID, then later calling a projObject.Draw() or something similar.
Below is a snippet of the survey point section. I'm iterating through each survey point in the xml data. I hope to create the projObj for each CL shot as a starting place. I think the figures would be similar if I can get a point to work.
Using C3D 2012
'Survey Points ================================================================
'Create Non-Control Points for network
Dim oNonControlPt As AeccSurveyNonControlPoint
'Dim xNumber As Integer = 0
For Each xPoint In pFile...<Point>
Dim xNumber As Integer = xPoint.<Number>.Value
[Code] ......
Is there a way to project to seperate feature lines with 2 different label styles. Am able to project object to view but both have same label. Need one to have Ex. R/W and the other NEW R/W, would like to do as one change rather than change each for every view.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
What are the parameters for a parametric 3D Equation Curve to create a path for a coil similar to that in the attached image?
Or alternatively tell me how I can produce the coil in some other way!
I have been using feature lines along buried utility locations to project these objects to section views. It works great. I created label styles, and It pops a vertical label on the section view that points toward the existing ground. I tried to use the same feature lines to project objects to profile views, and get very strange results. I do not get an option to select a label style, that field is blank, and on the profile view there is not a point where the alignment and the feature line crossed, but a line drawn all over the general area of the utility location. I have attached pdf examples of a sucessful section view and an unsuccessful profile view. I manually added the "EXISTING WATER" label so that it's easy to locate the line representing the water line.
Win 7 64BIT
C3D 2013
I am doing a overlay design for a runway.
I have alignments and profiles for the centerline and 12.5m either side. I would like to create a surface from a corridor by using the three profiles but extending the slope beyond the 12.5m either side.
I can easially create a surface between the three profiles and alignments, however I would like to extend the surface outward a further 10m in both directions at the same transverse slope. note that the transverse slope is variable across the entire runway.
I tried this using the "LinkOffsetAndSlope" generic link by making each subassembly 22.5m long and linking only to the profiles 12.5m from the centreline. However it seems it simply applies the levels from the 12.5m offest profiles at the full distance of 22.5m.
I am a recent convert to Adobe NLE systems coming from FCP 7. My question is: What is the highest quality codec that I can use successfully with AME and Premiere Pro CC?
I’m working on a project that is targeted to screen in theaters (festivals) so I want to finish with the best possible quality. My source was film telecined to Apple FCP Uncompressed 10-bit 4:2:2, 1920 x 1080, Millions, Data rate 1060.67 mbits/sec. However, that format is too unwieldy for editing. When using FCP for previous films, I transcoded those uncompressed files to ProRes 422 (HQ) for editing and for theater screenings.
I see that i can use ProRes with Premiere, with a little work. if he/she recommends a better non-quicktime format for editing and projecting?
I am an Adobe Creative Cloud subscriber and am using AME CC (version 7.2.0.43) and Premiere Pro CC (ver 7.2.1). I have installed all suggested updates. I’m running OSX 10.9.1 on my 2011 imac (core i7 with 32 GB of RAM). My graphics card is a AMD Radeon HD 6970M 2048 MB.
In an assembly document, if you want to project a sketch from one part into another, you go through these steps:
- select the part
- edit the part
- create a 2D sketch
- select the plane
- select project geometry
- select the sketch in the other part
- finish sketch
This creates a reference to the original sketch, so if I move the original sketch the new sketch will also move when I hit Assemble.
I am trying to do the same through the API, so I create a proxy for the original sketch and a proxy for the new sketch. I then use the AddByProjectingEntity method on the new sketch proxy passing the original sketch proxy.
This works for projecting the sketch, but it doesn't create the reference, so if I move the original sketch the new one doesn't move, even if I hit Assemble. How to create this link between the two sketches?
I'm trying to project an edge of a cylinder in a "detail" view. Here's the process I'm taking. Click the view and pick "create sketch", then I pick "Project Geometry". Then I pick the edges of the cylinder I'd like to project and it only projects one side. I can select the edge, but when I right-click and pick done it won't project it. It appears to me that it's only allowing one edge of the same object to be projected. I've tested other objects and it seems to only do this with cylinders.
Is this a setting or a bug in 2012?
I need a path on a sphere like on the image I attached (sphere_spiral) for the result similar to image called "gomb". The only problem, metric spiral or coil / 3d helical curve path won't work because it doesn't end the result I need, because the lines are converging each other. So, I figured out I need a logarithmic spiral 2D sketch or maybe a sinusoidal path.
I need a path from the sphere's top center point to the bottom center point, projected to its surface with equal distance of lines.
I have projected Civil 3D COGO Points projected to a profile. I simply want to display the Civil 3D Point Number for each point in the profile.
In the Profile Projection Label Style, the only field in the text editor that displays this point number is the "Source Object Name. This shows up as "CogoPoint 124" for point 124 (see attached). How do I make this simply say the point number ONLY, i.e. "124"?
It would be nice to program the label style to display this field, yet delete the first 10 characters of "CogoPoint x", so it only says the point number, "x"
I have limited experience with AutoCAD, I am an ESRI GIS user. So here goes:
We are trying to use map image insert to insert a NAIP photo. The NAIP photo is in UTM meters. The existing AutoCAD Civil dwg is in state plane illinois wf. Everything I have read says all you have to do is go to map image insert, pick the tiff, my correlation source is a world file (.tfw), and BAM, your raster image should show up where it is supposed to. Well, it doesn't work. It appears that AutoCAD is not reprojecting the image to state plane feet. How can I get it to do this?
If we connect to the image, it reprojects it just fine. However, on every pan and zoom it is redrawing. We can't wait for the program to redraw all the time, it's too slow. So if we can figure out how to import it, it's a much faster option.
Another problem: the NAIP has 4 bands and the 4th band is an Alpha Band 1. This makes the image appear faded and white. In ArcMap you can simply uncheck the 4th band so the image looks normal again. Is there a way to do that in AutoCAD Map?
My company had always used LDD until we were mandated to switch, our first project in Civil 3D is in the works. So far we have gotten through the beginning stages (alignments, profile, corridor, assemblies) but we are having a major issue with where to go from there. Right now I am trying to complete the design line work on the plan (wheelchair ramps, driveways transitions and signage) As of now I cannot get anything to line up easily with the corridor. I have been able to snap to the corridor so I can create a line at that exact spot to be correct, but then when I offset it will not change the elevation, I tried doing feature line and projecting the feature lines to the surface and some of it works but it becomes very buggy. My transition lines don't transition and some other lines I would expect to be at the same elevation have major grade changes. How to create the luinework at the correct elevation and with correct transisions along your corridor and surface?
View 2 Replies View RelatedSay I'm projecting some 3D polylines to a profile view I have, and the 3D polylines cross the alignment defining the profile view. Is there a way to format the projections such that the point of intersection is identified, and that the points will be updated if I change either the alignment or the 3D polylines?
View 1 Replies View RelatedI have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies View RelatedIs it possible to create a two image animation within Photoshop?
View 2 Replies View RelatedI heard that you can do animation in photoshop CS2. Can anyone verify that? how i can do it? Is it easy to use? Are you able to create gifs?
View 9 Replies View Relatedhow would I go about making animations in photoshop CS3
View 1 Replies View Relatedhow to get a GIF animation from the internet into my photoshop program and incorporate it into a design
View 2 Replies View RelatedI would like to know about how to create animations in photoshop. Then what is the best type for saving animated image in photoshop. according to my knowledge best type is .gif . but how to view animated gif in win XP/7.
View 8 Replies View RelatedI have noticed that when I create animations in Photoshop/ImageReady they have this tattered white fringe around them. It shows up really bad when I display them against a white background.
Is there any way that I can defringe my animations? I know this can be done in Photoshop, however, in ImageReady there is no defringe feature. More accurately quoted, "If there is one it is not in the same location as Photoshop's."
I am making simple animations now but am having trouble saving them. They are basic two frame but when I try to save It only saves one frame. I am using CS2.
View 3 Replies View RelatedIn CS3 I was able to export animations into .SWF files but with CS6 I can't seem to find out how to do this? The only option is .MP4 via File>Export>Render Video but thats no good to me. I've searched high and low for this answer but have come up with nothing!
It needs to be SWF. I've tried to convert MP4 into SWF using a 3rd party software but the quality was shocking and I'm unsure what settings to use for the original animation and also for the converting! Doing it with CS6 is much prefered if possible!
I recently downloaded a trial of Photoshop for my mac book pro, and love it. I have been practicing doing simple graphics etc with textures and templates, but however, i was following a tutorial when it said click 'animation'.
It said it was under 'windows' on the tool bar, but I couldn't find it anywhere.
I have just begun experimenting with the animations feature in Photoshop (or maybe it is called timeline). I feel it very useful for animation small sprites for 2D game characters but there is one thing I seem to not be able to figure out and that is how to "replace" graphics? Say for example I have a walk cycle with a character holding a sword. I have layers for the body parts that I move around until I have an animation. It would then be very good if I could just drop in another sprite for a weapon, say an axe and have it replace the sword.
The only way I have been able to do this is to manually remove the sword and place the axe in the exact spot of the sword had, but that is a very clumsy and slow method.
How to I add two animations to an image ready file.
I have already made two animations ... seperatly, and I was wondering how I would go about adding them together.
I've got the hang of doing animations in photoshop (keeping several images visible for a few seconds each) ... but I don't know how to fade from one image into the next. I've tried overlapping the timeline segments, but that doesn't work.
View 1 Replies View Related