Photoshop :: Printers
Nov 13, 2002I'm looking at a copier that does 9600x600dpi.
I know the it does 600 dots per inch.
But what is the 9600?
Surely it cant do 9600 horizantal lines by 600 verticle.
ADVERTISEMENT
Photoshop :: Printers, Profiles
Jan 2, 2006Im running PS CS on a PC and printing (mainly photographic images) with an Epson 1290 using a continuous ink system with Ilford paper. I have calibrated my monitor using a Spyder and have had the printer/paper/ink combination profiled. Despite all of that I am still having problems getting the printed image to match the screen. Quite often there appears to be an enhanced saturated red tint over the image. On some of the B&W images I have also been getting a red/magenta cast in my white highlights!.
I have downloaded new print drivers, I have also had my profile regenerated 3 times all with no effect. I have also just connected my printer to another computer and printed the same images from Elements employing the profile for the printer/paper/ink combo. One image came out more like it should with a reduced red cast but some of the others now appeared fine of both systems after printing them one after the other, i.e. my main system is now looking OK.
Photoshop :: PS CS4 Does Not Recognize Any Printers
Apr 26, 2009I have a client that gets the error ""Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer" when he tries to print from PS CS4 He has a networked printer and has Adobe PDF as his local default printer (Other CS4 applications print fine with this setup only PS gives trouble)He is running Vista Ultimate - 64 Bit and is current on his updates for Vista and PS and has plenty of RAM and scratch.
View 3 Replies View RelatedPhotoshop :: CS6 - Can't Print To Epson Printers?
Sep 10, 2012I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
Â
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
Photoshop :: Printing Same PSD File On Different Printers
May 12, 2012I am designing t-shirts in Photoshop that will be printed out by a number of employees in different locations, and with different printers. These designs will be printed on special A4 paper and then transferred on to the t-shirts using a heat press.Â
Â
But I am worried that I will have issues with "outside of the printable area" type errors on certain printers. I would rather not have use the "crop to fit" option as this will mean I lose quality.. Should I just set a default margin for all of my t shirt template psd files? Or is there a better way around this?
Photoshop :: CC Is Not Recognizing Any Of Installed Printers
May 22, 2013Photoshop is not recognizing any of my installed printers (inconsistently...)
View 3 Replies View RelatedPhotoshop :: CC On Mac OS X 10.9 Doesn't Recognize Printers?
Nov 22, 2013Photoshop CC on Mac OS X doesn't recognize printers
View 4 Replies View RelatedPhotoshop :: Adobe CS Apps Do Not See My Printers In OSX
Apr 23, 2004I have recently installed the Adobe CS, and am running OS 10.3.3. I have two USB printers, one epson and one HP, that print fine with all other apps and are in my printer list and so on... But when I go to try to print from Photoshop, in the print dialog window, instead of my default printer being selected, the drop down menu says "No printer selected". When I go to try to select a printer from that drop down menu, my two printers are not there, and instead the only options are "Edit Printers list..." and "check for printer updates..".
I have tried everything I could think of... Like I said the printers are installed and working great in other apps, and the same menu in other applications shows both printers and lets me select them. Any suggestions? Is there a plugin or something that I need to put in a specific Adobe folder? Why don't the Adobe programs see the printers? Here's another weird thing: Adobe Acrobat does see the printers. And that is how I have to print my photoshop docs, save as PDF and then print.
Photoshop :: CS4 Refuses To Recognize Installed Printers?
Jul 1, 2013I have three printers installed on this Windows Vista 64-bit machine, and they all operate normally with other applications. When I open a TIF or JPEG file in Photoshop, part of the time they open normally, and I can do print preparation and normal printing. Sometimes when I open a TIF or JPEG file, they open normally, but when I start to prepare them for printing (printer selection, etc.), a Photoshop CS4 message tells me that I have to install a printer first before I can do any printing-related tasks. It acts like there are no installed printers at all. Obviously I am not changing my printer hardware status between files that work and files that don't work.
Â
I've been trying to compare the files that work normally with the files that don't work normally, and I haven't found the trend yet. If I try to recreate thousands of files that don't work normally so that they do print, that will be a monumental job.
Photoshop :: Format Screen Printers Details
Jun 3, 2013My printer has asked for images as follows..Final artwork must be High resolution with a transparent background
High Resolution Vector Image
in the following formats
All text converted to curves / outlines
CorelDraw � to V13
Photoshop V6
Adobe Illustrator CS4
.eps
.pdf
We have a detailed drawn image. This has been scanned at 600 dpi and put into Photoshop to enhance the image.We need to know what to do in Photoshop to meet the needs of the printer and get the best possible image for printing.
Xara :: PDF/X Export With Printers Marks
Mar 28, 2011I have a Xara Xtreme Pro 4 document, a multi letter size page document with text and color images (59) pages. My intention is to create a 300 dpi PDF with included printers marks, full bleed, cut marks, etc. When I export to PDF, I select PDF/X (1a) and select export. Having sent the file to my publisher, I am told that the printers marks aren't present in the document. I have no way to verify, as when I open the document, I only see the basic document (no printers marks, etc.)
My assumption was that the printer's software would be able to see this whereas the basic PDF reader cannot. Again, I have no way to verify if the printers marks exist.
Should I be creating a larger page size to accomodate the printer's marks? What am I doing wrong in the export that the printer's marks aren't being placed?
I am sure PDF/X 5 is better and might be available in a new version of Xara, but I would think PDF/X 1a - 4 any of them should be appropriate to place the necessary marks. What don't I know?
Don't know if the PDF is worth looking at to verify, but it is 254 MB in size containing unpublished material, I don't want 'released'.
AutoCad :: All Printers Show Up As PC3 Files?
Aug 19, 2011I'm on autocad 2006. I'm not sure what caused it, but about a week ago, my autocad got rid of most of the printers/plotters that showed up in the plot dialogue box. And on the ones it did keep, it added .pc3 to the end. How can I get it to find the actual printers again and not just the .pc3 files?
View 2 Replies View RelatedAutoCAD 2013 :: Page Setup For Different Printers?
May 1, 2013My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies View RelatedAutoCAD Civil 3D :: How To Delete Printers From List
Nov 9, 2012I am using Civil 3D Map 2009 and its showing many unwanted printers in the list when I try to print a Map. How can I delete printers from list.
View 6 Replies View RelatedAutoCad :: Remove Unused Printers From Plot Dialog?
Oct 24, 2012using acad 2010.
i want to remove all the printers i don't use from the plot > printerlist (also system printers). how can i do it?
Illustrator Scripting :: CS4 - Populating A Drop Down With List Of Printers?
Mar 27, 2012I'm trying to populate a drop down field with the list of available printers. Here's what I have:
Â
var printerList = app.printerList;
var w = new Window ("dialog");
w.orientation = 'row';
var dropDown = w.add("statictext", undefined, "Please select the printer");
var dropDown = w.add ("dropdownlist", undefined, printerList);
dropDown.selection = 0;
var buttonGroup = w.add ("group");
buttonGroup.add ("button", undefined, "OK");
w.center();
w.show();
This will populate a drop down with "Printer, Printer, Printer, Printer" for each printer instead of the name of the printer (which is what I want).
Â
When I try:
Â
var printerList = app.printerList.name;
Â
I get a drop down of blank entries.
Â
How exactly does the printerList work?
Illustrator :: Change Size Of The Text That Comes Out With Printers Marks?
Nov 29, 2012Is there a way to change the size of the text that comes out with the printers marks?
View 1 Replies View RelatedCorelDRAW X5 :: Printing Multiple Copies On Primera And Signature CD Printers?
May 3, 2011I have used Corel since Version 8.0 on Macintosh and Version X3 on PC with no problems with printing to Primera CD printers of various models. Also on Mac running Parallels and X3
I have had to go back to X3 on XP and Windows 7 to enable multiple copy printing.
Using the latest printer drivers where available and removing and reinstalling the drivers under XP and Win 7 with Corel X5 has had no effect. Both versions of windows are new clean installs on a dual processor XEON PC.
why this doesn't work. I have noted that other Primera printers have the same problem and I don't want to use the PDF option.
AutoCAD Print / Plot :: Plotting To Different Printers And Different Size Papers
Mar 13, 2013I am using AutoCAD 2006. Â I have a set of road plans that is 25 pages long. Â This means that I have 1 model space tab and 25 paperspace layouts. Â Each paperspace layout contains 1 viewport that shows a specific piece of my model space drawing. Â I need to be able to print these 25 layouts to multiple printers at multiple sizes. Â Specifically, I want to be able to print 11x17 sheets on printer #1, 11x17 sheets on printer #2, and 22x36 sheets on printer #2. Â I know how to create named page setups so that I can just pick which one I want to use to print. Â
Problem #1 - When I change from printer #1 to printer #2, keeping the same size (11x17) sheet, the paper moves slightly relative to my viewport that is on the page. Â Therefore, I have to move 25 viewports (1 on each page) every time I want to print my plans.
Problem #2 - When I change the size of page I want to print, the viewport does not size to the page. Â Therefore, I have to resize the 25 viewports and re-zoom their contents every time I change the size of paper I'm printing on.
Problem #3 - When I want to change the printer or size of sheet that I am using, I have to go to every layout tab and select the individual plot setup that I want to use. Â Is there a way to apply 1 named page setup to all layouts at once?
Ideally, there would be some way to link the viewport to dynamically change with changes in the paper location and size, but I'm not sure that's possible. Â
Again, I am using AutoCAD 2006.
AutoCAD Print / Plot :: 2013 Not Printing On Network Printers
Aug 5, 2013I cannot get my program to print to any of our network printers. I am using Autocad 2013 LT with FusionWare and Windows 7 on a Macpro OSX Lion. This started being a problem a few weeks ago and the only way I can get anything printed is to make a pdf and and then print the pdf from Acrobat.
Today I brought in a HP 940c printer from home and connected it to my desktop printer. I spent an hour uninstalling and installing the drivers. I can now print from Acrobat on both the PC and Mac sides of the computer, but when I try it from Autocad I get Error_Printing in the HP printer window. No info as to what the error might be. I tried this several times, tried renaming the file with a shorter name but since the driver puts in the entire path that was a futile gesture.
So I have confirmed that the printer is functioning correctly, just not with Autocad. I realize that i do have a working workaround but it is tedius and unnecessay to keep making all those pdfs.
AutoCAD Print / Plot :: Page Setups For Multiple Printers
May 8, 2012how to create page setups for multiple printers in a network environment?
Here is the problem:
We have 2 offices with 3-7 printers per office and each printer with different capabilities (black and white, color, 11x17, wide format, etc.). I have CAD users who know little about setting up layouts so I want to create preconfigured layouts that they can import from a template via Design Center or other means.
I know I could set up a layout for each printer, page size, plot scale, and plot style table, but that gets to be so many layout permutations that it becomes overwhelming to manage and use. Up until now I had set up PC3 files for a few commonly used printers (wide format plotter, laser, pdf) and gave them generic names with the intent that I could simply direct the output to any printer by assigning it to one of the generic PC3 files. The problem I've encountered is that over time we've acquired new printers and old printers sometimes go offline or out of service and many of the printers have incompatible printable areas and page sizes to each other, so for example a page setup that calls for an 11x17 sheet for one printer does not have an equivalent size when a different printer is assigned to the layout.
Are we stuck with having to configure setups for each and every printer and permutation?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
AutoCAD Print / Plot :: Missing System Printers 2007 On Windows 7?
Nov 28, 2012Coworker is setting up a new Win7 (64bit) machine but we don't have the ability to upgrade CAD at this time. So running AutoCAD Mechanical 2007. (Yes we know they don't always play nice) Two other workstations here are running the same  OS & CAD and print without issues. This new machine AutoCAD does not see any system printers. Have made sure the "Hide System Printers" is not checked under options. I can add a plotter file for each system printer and that workaround  is OK, but why this one machine can't see the system printers. They are Xerox workstations on the network - not local. We have already restarted AutoCAD and restarted the PC.
View 3 Replies View RelatedLightroom :: Convert And Colour Correct Images In CMYK Mode Before Sending To Printers?
May 21, 2013I've recently received a small batch of calendars from a local commercial printers. The colours are OK, but do not match the originals, especially the blue's. I've had similar problems with greetings cards from a different printer. The problem appears to be that I supply the original files in the RGB color space, but they print using CMYK.
Â
I Raw process using Lightroom 4, with adjustments if necessary being made using Elements 10. To the best of my knowledge neither of these programs have the option of editing or saving in the CMYK color space. For more accurate colours is my only option to purchase the full version of Photoshop (CS6 or CC), then convert and colour correct my images in CMYK mode before sending to the printers ?.
Photoshop :: Error: Cannot Initiate Photoshop Because Photoshop Cannot Create Any More Windows
Nov 2, 2008Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Photoshop :: 'save To Web' From Photoshop To Image Ready Changes Original's Color Before Optimizin
May 28, 2004Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View RelatedPhotoshop :: Can Photoshop CS Give Smooth Lines To Older MacPaint Clip Art?
Jun 7, 2004when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
Photoshop :: Error :: 'Could Not Complete Your Request Because Photoshop Does Not Recognise This Type Of File'
Jun 17, 2008I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
Photoshop Elements :: Uploading Photoshop Pictures To Website Using Browse From Site
Apr 29, 2013I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View RelatedPhotoshop :: Adobe Photoshop Hacking For Working Special Characters?
Oct 30, 2012 of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
Â
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
Â
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Photoshop :: Error / Could Not Initialize Photoshop Because Preferences File Invalid
Aug 21, 2012Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies View RelatedPhotoshop :: Saving Tagra Files With Alpha Channels In Photoshop 7
Mar 8, 2004when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!