Photoshop :: Print Banners?
Nov 28, 2004
Can you print banners using Photoshop (7). I know a lot depends on the printer, but I've used my printer (HP PSC2110) to print banners using other programs. That's what I've had to do actually, is design the banner in PS and then use another program to print it (usually Print Shop). There are settings to do this, but anytime I try it, it only prints one page of the banner. I have the settings right, everything is on banner, landscape and non-correlated.
View 2 Replies
ADVERTISEMENT
Nov 5, 2005
I'm trying to make some very simple banners for a website, mainly to a 468 x 60 size. I have my basic banner sorted, with a logo on one side and some text on the other, which I am intending to animate next, but I seem to be stuck on what must be the very basic task of adding a frame or border around the whole banner to a width and in a colour of my choice. I have tried using the rectangle and curved rectangle tool, but can only seem to adjust the fill, not the line.
Can someone point me in the right direction please?
View 6 Replies
View Related
Apr 6, 2004
I'm looking to create a simple banner with just a background color and text on top. What's the best format to save in if I want to use it in email attachments? I've tried both .gif and .jpg but the text looks blurry when I view it in the email (however it looks crisp on screen in photoshop)
View 2 Replies
View Related
Apr 8, 2004
I'm making a banner for a phpbb forum. So these forums scale for different resolutions, and I need help with how to make a banner that fits all sizes. I've been told to make 3 images of the same height (left, middle, and right) and to put the middle part as a background table.
View 2 Replies
View Related
Oct 23, 2005
how to make banners using photoshop 7.
View 4 Replies
View Related
Apr 29, 2007
I wanna ask for any animated banner making technics.
I use imageready,I just can make banner very simple,
I wanna learn how to make proffesional banners.
View 4 Replies
View Related
Apr 12, 2007
how can i achieve these lines that are kinda screen effects over the photo? I want to make my own icons with this style.
this is horizontal direction lines, i also want to learn if i can manipulate the directions of the lines
View 2 Replies
View Related
Aug 20, 2006
I am using Adobe Photoshop CS2, editing the banners via ImageReady
My question is:
How do I add frames to the banner that I am making? I know how to duplicate the same frame while in ImageReady, but I want a slogan 1 in frame 1, slogan 2 in frame 2, a logo in frame 3, and so on.
View 4 Replies
View Related
Jul 24, 2012
I've been tasked with the creation of some flash-type banners for an intranet site. The idea is to have an image with text that expands across the top of the website and fades out into another image with additional text.
Â
I'm just wondering if it's possible to create this kind of thing in Photoshop? My first thought is that I would need flash but unfortunately, I'm not sure that I'm going to get the go ahead for that product. I have however been able to order Photoshop and have CS6 on the way to me...so just wondered if I can plan whether I need to try harder to get the resource to buy Flash professional?
View 3 Replies
View Related
Apr 3, 2009
I am preparing some 4-colour artwork (Text & Graphics) for printing onto canvas banners, finished size 8ft x 3ft. Never done this this big before. Surely I do not need to size the artwork in PhotoShop at that size, as the file sizes are massive?
The printer requires hi-res PDF's.
View 5 Replies
View Related
Sep 27, 2005
how make sports banners
View 2 Replies
View Related
Oct 15, 2003
How do you design custom shapes like tabs and banners and such. I do not want just a plain rectangle or square ....
View 4 Replies
View Related
Jun 22, 2006
Im currently trying to produce some banners that are quite large 80 inches x 34. I dont know how to scale that down to a managable canvas in photoshop but at the same time not loose any quality.
View 4 Replies
View Related
Jul 11, 2005
I have been working on some small banners and heading bars for my site. One thing I always seem to have a problem with and have not seen much information on is what fonts to use, or how to keep a font clean and crisp once it has been converted from psd to a web usable file such as a .jpg or a .gif. Most of the text I am working with is around a 10pt font. I have tried using different types of fonts and they all look fine as the psd but seem to lose something in the transition.
I have optimized them to 100% and they still seem to lose something. Does anyone know of any techniques or tutorials on this subject. I have seen many banners out there with this size font or smaller, and they all look very sharp.
View 4 Replies
View Related
Nov 6, 2013
I have a very uncommon problem that , when i update my banner of website which has photo of handmade leather messenger bag and leather backpack and wit size of 1343px x 460 px and i make exact same size image in Photoshop using 72 dpi and after uploading and updating my website banner get cropped automatically.
I tried everything in code of my website but every time i change it crops the image. what resolution i must take to make my image say similar as source. My website is
[URL]........
View 1 Replies
View Related
Feb 23, 2014
I have designed a banner. How do i insert it in my website as a pop up banner? I', using Xara Web designer 9.
View 5 Replies
View Related
Jan 20, 2014
I'm working under a 40kb limitation with my current web banners and animated gif's. But I was thinking of utilizing adobe edge to create better motion and and overall graphics, but wasn't sure of its output size. Can I create amazing web banners with Adobe Edge and keep it under 40kb?
View 2 Replies
View Related
Jun 15, 2011
I am trying to create 48"x60" banners with text and high res images. Basically I am exporting a large 48"x60" .odt (open office) file as a PDF at 300dpi so I can then import it in to GIMP. When I try to import the pdf at 14400 (width), 18000 (height), & 30o resolution I get the following:
------
GIMP Message
Plug-in crashed: "file-pdf.exe"
(C:Program Files (x86)GIMP-2.0libgimp2.0plug-insfile-pdf.exe)
The dying plug-in may have messed up GIMP's internal state. You may want to save your images and restart GIMP to be on the safe side.
Gimp Message Opening 'C:UsersDUSTINDesktopWORKLR2 NO IMAGES.pdf' failed:
Procedure 'file-pdf-load' returned no return values
------------
The printing company is requesting my file be at 300dpi so that is why I am trying to import at 300 resolution. I am guessing this is a bug. My question is can I somehow just open the .odt file in gimp and add my high resolution images to it there? Is there a plug in for .odt in GIMP?
View 3 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
View Related
Jun 27, 2013
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
View 13 Replies
View Related
Dec 5, 2012
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
View 6 Replies
View Related
Feb 14, 2008
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
View 3 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Feb 26, 2013
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Apr 26, 2013
I use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
View 9 Replies
View Related
Jan 9, 2009
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jul 26, 2009
I have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print. I am slightly confused on how to do this for the following reasons: Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size. I am not sure if "document" and "canvas" size are the same? Could somebody please advise me. Basically, I want to enlarge my tiffs to fill a European A4 size page. GF
View 2 Replies
View Related
Feb 6, 2009
I get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253
View 2 Replies
View Related
