I want to find a quick way of merging my thumbnailed prints with different colour mounts and maybe my frames. So i can display the different options i offer my products in, also because i have a lot of prints ( 1000+ )
View 3 RepliesI reformatted my computer and installed a fresh copy of Windows 7 service pack 1 and installed Photoshop CS6 and when I print my work the color gray prints as brown and the yellow green has a shade of brown in it as well so its darker. I did calibrate my monitor, I use sRGB IEC61966-2.1 as ICC profile and RGB in working spaces, and US Web Coated v2 as CMYK. I changed the mode to CMYK 16 bit and proof setup to Working CMYK. In printer setting I set the color handling to Photoshop manages colors and set it to hardproofing. I did match it with the color management in display settings.
I think my Epson T1100 printers are fine because they both print the same color gray as brown so it must be in Photoshop where the problem is.
This is frustrating..Before I reformatted I was using Photoshop CS5 and my prints are fine but when I reformatted and installed a fresh copy of Windows 7 and Photoshop CS6 the printing problems starts, I reinstalled Photoshop CS5 but the print outs still has problems, color gray prints as brown..By the way, I print on white bond papers and white box boards, so color blending is not the case I'm sure..
I've been having trouble printing color prints with PSE 9. They appear kind of pale or less vivid (unacceptably so), the colors are just not as they appear on my monitor. I'm using an Epson R2880, iMac 10.6.8. It prints b&w beautifully. I've been through Epson tech support, checked nozzles and cleaned heads. While speaking with Espon they suggested I print from another application, so I tried using iPhoto, colors came out accurately there. I happen to still have PSE 8 still on my computer, so I attempted to print from there, the colors were also more accurate there (and that's without using the ICC profiles I have in PSE 9 ). It seems the issue is unique to PSE 9. I've tried changing my color setting, typically I have it set to AdobeRGB, but have tried "no color management". I have my monitor calibrated, use proper ICC profiles for any papers I use (and have tried multiple papers).
View 1 Replies View RelatedWe are Fine Art Printers using PS4 on Windows XP and 7. Because we have to proof individual colors and individual areas we often have over 20 adjustment layers and masks on images greater than 1 meter square. The masks get hugely complicated and the images sizes are often well over 1GB.
Normally we would take a Snapshot(?) Shift+Ctrl+Alt+E as we get an area correct, then move on to proof the next. We have an image with dark blue/black cloud and noticed the image lost contrast and colors subtly changed when we did this. We have tried flattening layers, merging visible layers, merging down adjustment layers and even saving as a JPEG, but the colors change slightly each time layers are merged. A global change like Levels is not an option for fine art images. We need to simplify the images and reduce the memory used for printing.
First, the help files, as of today (they worked before) have mysteriously ceased working. If I click on Photoshop Help, I get the error message "The memory could not be written." The same message appears if I try to reinstall Adobe Help Center, and when I attempted to reinstall CS2 entirely.
Secondly, the reason I needed the help files is because my color layer will (as of today) not merge with other layers. When I try to merge a layer set to "color" with, say, a "normal" layer, the color effect automatically disables as it merges, leaving a horrible mass of paintwork on top of where my nicely shaded color effect used to be. Now, I am certain color layers used to blend, as I've done this simple operation many times.
Reinstalling Photoshop CS2 hasn't fixed either of these problems, rendering it almost unusable (I use color layers a lot).
I'm goofing around with Photoshop 7 and would like to scan in a board of a board game. The board is too big for my scanner, so I have to scan it in pieces.
When I scan the board, it won't lie flat on the scanner (because the scanner edges are not flush with the glass). Instead, it's a bit tilted as it runs over the raised edge, and the part that is tilted up (away from the glass surface) doesn't get exposed as well, so the board image shifts from light to dark as it goes from the part closest to the scan head, to the part that won't quite sit on the glass.
Throughout a project using Photoshop CS4, I print out the pages to make a dummy booklet. Once, upon opening the file and wanting to print, the preview window for Epson Stylus Photo R2400 printer showed a color inverse for the entire file. Viewing the images is normal in all ways. I had been making routine nudging, text editing, etc., on various layers and everything looked and behaved fine. It's only in the printing. I looked to see where a correction could be made, but I can't see anything. I tried to have the printer make color adjustments and have Photoshop make them.
View 5 Replies View RelatedI have many black and white antique prints which I want to colour in photoshop. They are scanned in colour because the paper is old and actually cream and black and white scans of very old paper come out a nasty, dead grey. (Not at all like crisp modern black and white graphics. The etching process of the original means that they are very, very finely detailed.
So far I have been cleaning up the image and then colouring over the top of the black lines. The disadvantage of this is that I lose the sharp blacks. I then go over the important bits with the eraser tool to get the black back but it is very tedious and much is lost. know about opacity and build the colour in opaque layers, and I know the tools to enhance the dark areas such as the dodge tool but these slightly alter the colour and dont restore the blacks lines.
QUESTION: Is there a way to colour in a print and then key out the negative space (white but really cream)and place the cleaned up original black image over the top of the coloured image? This way all the black shading detail would be fresh and clear and the colour will show through.
I print out of Lightroom, monitor and printer calibrated with Colormunki. Soft proof with the paper profile looks fine (whether the manufacturer's or mine).
Print into jpeg file - looks fine..Print to printer with identical profile - colors don't match. It makes a significant difference whether perceptive or relative is chosen in color management, but in both cases colors just don't match. Perceptive - colors look completely different, relative - most colors are good, but deep black shadows for example are dark grey instead of black.
Printing the colorsamples for the colormunki - all colors look perfect.I've spent a fortune meanwhile on paper and ink..
Our CAD operator is attempting to print batches of DWG files from within AutoCAD 2010 LT, but every time that he does a batch of jobs, only half or less of the jobs actually print, while the rest leave his queue and then display in the printer status as 'Canceled.' This only occurs for color prints. The same batches of jobs in black and white print fine. Also, if we take the same data and convert it to a single PDF and send only that one PDF as a color print job, it prints. On the printer side, the DWG jobs are marked as 'Deleted' with an explanation of "Insufficient accounting allocation," which refers to the printing limits that we have assigned our users for the printer. However, the user is not over his limit, and any non-CAD job prints without any problems. I checked with our printer company but they think it's an issue with the software. Is there a known issue with AutoCAD 2010 LT failing to print batches of color drawings?
View 6 Replies View RelatedWhen I go to print a copy it automatically prints in color. If I want to go just black, which I like to copy everything in just black and white, I have to manually do it. Is there a way to make black and white the default.
View 4 Replies View RelatedWe have experienced what we think is a bug in AutoCAD 2010's printing. We are running A2010 with Update 1 & 2 installed. Same issue on both x32 & x64 hardware.
Each project is setup with a title block xref'ed into the sheet (quite common method).
The Title Block xref generally has images loaded & therefore the image is a child to the sheet file when the TB is referenced in.
We have used this method for about 15 years across most versions of AutoCAD with no issues before now.
Now on AutoCAD 2010, when we print the sheet, the xref'ed TB images print black & white, rather than color. However if we use AutoCAD 2008 with same pagesetup/ctb/pc3 etc, we get the same print, but image is colour (as we would expect & want).
This leads us to think that there is some issue in AutoCAD 2010 with xref'ed images & how they are treated when plotting.
To complicate matters further, if we bind the title block, thus making the image embeded within the sheet, the images now print fine in full colour.
So, if a image is loaded via a xref'ed dwg, it plots in Black & White. If image is referenced into live sheet (not via xref), then it plots in color. All other xref'ed linework prints as expected (defined by ctb).
Is there any new variable which manages the colour printing of the image in A2010 which we are not aware of (that didnt exist in A2008)?
I have an image that has elements pasted in from PNG files, and those elements have some shades of green. I want printed output in gray scale only, so I did Image -> Mode->Grayscale. The image on screen went gray as I wanted. When I print it, however, I get an image in which *some* of the colored parts still are colored!
View 1 Replies View RelatedHow to change black and white hand-prints into color for some art work for my kids. I am already able to switch between black and white between the foreground and background, but not able to change all of the black "color" to a different color including all the minor lines on the hand and foot prints.
View 6 Replies View RelatedThe company I work for hired someone to take "professional" photos and the thumbnail preview is the normal color but when you view the actual image the colors are completely wrong. The background is supposed to be white.
View 1 Replies View RelatedBecause of the problems with wipeouts, I have switched to using some solid hatch set to colour 255. The hatch is in paperspace, sitting under titleblock and other Layout text. I am plotting to an HP1050C, using a .ctb file with 255 set with grayscale off.
The plot preview is fine, but the hatch blocks come out black on paper. I thought this was the problem with wipeouts, and that hatch didn't suffer from it.
I get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies View RelatedI am exploring the possibilities of content browser of AutoCAD 2012 and came across a contrast issue. The thumbnail background color is white and the lines are as drawn. (Drawing with black background)
Is it possible to change the Thumbnail Background color to black to get a better preview.?
We like to show thumbnails of a drawing in a picturebox in a .Net control. It works but the background of Thumbnail is always white even if the real layout background is black. Also it only showing a partial view rather than the view state while last saved.. This makes the user in exactly identifying the drawing in the picture box.
View 1 Replies View RelatedWhy is the thumbnail border for some images a different color in grid view? Please see the attached image. I can't figure out why the image on the left is a lighter gray than the two in the middle. The far right image is lighter because it is selected.
View 5 Replies View RelatedI am not able to save the changes that I make to the starting position of my scenes thumbnails when I use a Thumbnail Menu to create my DVD. I am using Video Studio X4 with Service Packs 1 and 2 installed running on Windows XP Home, SP 2 with all updates installed and DirectX 9.0. The scene changes work fine when I Preview them but they are not saved when I close the Create Disk sub-menu. When I return to the “Menu and Preview” section of the Create Disk sub-menu, the Main Menu scene change is present as is the Chapter 1 scene change but the other chapter scene changes are gone. What can I do to correct this?
View 1 Replies View RelatedI have recently upgraded from PS7 to CS2 and have not been able to get a decent print since. I used colour mangement with PS7 and had no problems (unfortunately I had a virus and PS7 got trashed as part of the removal of the virus). Whenever I print now I get prints that look to be oversaturated with nasty colour casts. The settings I am using are as follows:-
Print with preview
Colour Management
Print Document (Profile Adobe RGB (1998))
Color handling Let Photoshop determine colors
Printer profile Prem Semigloss 2880.icc
Rendering intent Relative Colorimetric
Black Point Compensation Checked
I then click on Print and select
Epson Stylus Photo 2100
I then click on Properties and select Premium Semigloss Photo Paper from the Media Type.
I then click on Custom and select PremSemi2880 from the dropdown (this has the Color Management set to No Color Adjustment and Photo Quality set to Super Photo 2880dpi. All other settings are unchecked)
I then click on OK and then OK again
When the Print Preview window appears it is horrible (which is what I would expect. It was like that in PS7). When I click on Print, the image looks though it is super saturated just as if the printer driver settings have been applied along with the Photoshop settings.
I am getting lines in my prints from PhotoShop CS6.
My printer is the Canon MX522.
Ive noticed that printing from other *dumb* programs such as Microsoft Paint the images look fine BUT with photoshop the images print ultra fast and have lines. It looks like note taking paper. How do I fix this? I am guessing this is some kind of Printer quality setting????
I'm using phoroshop cs6, windows 7 and an Epson 3880. When I go to print, the print preview looks good, the paper size is correct but only the lower 1/2 -2/3 of the photo prints.
View 1 Replies View RelatedI am using CS5 on a Mac printing to an Epson artisan50 but prints turn out too dark. The image on the monitor is correct in all applications including CS5. The prints are correct in other applications but only in CS5 are they too dark.
View 3 Replies View RelatedI'm printing on a epson 200p, and using photoshop 7. When I print on the watercolor paper, my prints have been coming out really dull, and it looks like there's a haze over them.
View 9 Replies View RelatedI have CS3 and use a 3800 for my work. Whenever I set an image to print the preview displaces the image to the left and up about 1 cm. no other application I have does this.
I am using windows XP on a dual core PC.
In CS3, I'm having trouble getting my prints to match the appearance on monitor -- my prints are uniformly 1-2 stops too dark, color otherwise is very good. I have calibrated my Dell monitor with Colorvision's Spyder2 colorimeter. Prints are also a hair too dark in CS2, but not as dark.
Photos and Photoshop are in RGB color space. Printer is Epson R2400 with updated drivers I just downloaded and updated into Photoshop. I also downloaded updated ICC color profiles for the Epson Premium Glossy Paper I use.
Printer settings in Photoshop are: Photoshop manages color; Adobe RGB printer profile; perceptual rendering intent; black point compensation "on"; ICM color management; color management set to "Off". I'm using North American Prepress 2 color setting. These are the exact settings Scott Kelby recommends in his "Adobe Photoshop CS3 Book for Digital Photographers" for getting calibrated prints.
Old: CS3 printing to Epson 3800. New: CS4 prints dark on Epson 3800. Regardless of picture sent over. Same settings as with CS3 and every variation I can think of. Epson 3800 hasn't changed. Only Adobe Photoshop version has. I can print the same pics from (example) Windows picture manager, and what I see on the CALIBRATED screen I see on the Epson, so this isn't an Epson issue.
View 1 Replies View Relatedi want to automate the following task to make a 20inch by 20 inch print with 9 smaller prints each 5.33inch prints evenly spaced with a 3/4 inch border between the print and a 1 1/2 border around the outside for framing.
View 1 Replies View RelatedI've got a picture that have been cropped top and bottom and ps'ed.....how to resize it so when i print to let say 6R or even 9R it wouldn't have the ugly border which shows it was cropped.....
View 1 Replies View Related