I have an old computer with PS CS installed (an upgrade version based on an original PS 7 install). I now have a new computer (instead of, not in addition to the old one!), need to install CS on that, and cannot for the life of me find the PS 7 install disk. I have the CS install disk, and I have the S/Ns for both, but not the PS 7 disk. The CS disk won't install because it can't find an installed product.
View 4 RepliesThe motherboard on my laptop crashed and I have pulled the hard drive and I can use it as an external drive to transfer file, programs, etc. to my new laptop. I transfered the CS2 folder. I can open the program but immediately get an error box that says "Your Adobe Photoshop username, organization or serial number is missing or invalid. The application can not continue and must now exit." I have the serial number frommy original install. I can't get far enough to enter it anywhere.Â
View 2 Replies View RelatedWhen I import my photos from my hard disk to the organizer the image number does not come with it.
View 2 Replies View RelatedWindows 7, had everything working fine. Added SSD and installed system from scratch on SSD. Old drive is now my second drive.
Â
Trying to put the scratch disk on the second (old) drive to reduce wear on the SSD. But every time I do, I get the disk error message and it erases all my settings (so annoying!)
Â
I figure it's a permissions thing since I've had to deal with that already to some degree, but I don't know how to fix it since I don't know where adobe is trying to save the scratch file.
When the 'up' arrow appears in a thumbnail and comes up with the message:
Â
The metadata for one or more of these photos has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
Â
What exactly does that mean? This seems to happen every time I export an image to PS (CS5) and return to LR. What exactly has changed? What settings are being imported if I choose 'import settings from disk'.
This document has been damaged by a disk error. The most likely causes of this error are: a defective disk drive, a defective disk drive cable, or incorrect peripheral cable termination. Some of the pixels in this document may be invalid.
View 5 Replies View RelatedRunning PS CS6 on a Mac Pro, Mt. Lion 10.8.1, 10 GB RAM, 3.6 Tb on 4 internal drives. A new problem cropped up just today. Launching PS brings error msg Could not open because a dik was not aviable, and a 2nd msg Could not open a scratch file . . . . Removing Prefs file works, but there's a BUT: I can't change some prefs without the problem reoccurring.
Â
I can reproduce the following: reinstall PS CS6, Change 1 preference, namely make another disk the scratch disk, move it to 1st place. Problem reappears. It appears I must leave the boot disk as the primary scratch disk. All my disks are OK, repaired & permissions verified by Disk Util.Even if I just clear prefs, verify releaunch is OK, and change this one preference, I get the prob.
Â
FWIW here are the last few lines from the Console log:
Â
9/2/12 3:57:12.000 PM kernel[0]: proc 2934: load code signature error 2 for file "Adobe Photoshop CS6"
9/2/12 3:57:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=2934[Adobe Photoshop ] clearing CS_VALID
9/2/12 3:57:12.000 PM kernel[0]: proc 2936: load code signature error 2 for file "AdobeCrashDaemon"
9/2/12 3:57:13.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=2937[sniffer_gpu] clearing CS_VALID
9/2/12 4:00:28.064 PM WindowServer[116]: _CGXGetWindowOrderingGroup: Operation on a window 0x425 requiring rights 0x5 by caller Photoshop
I have recently bought an SSD (sandisk 120GB) which i have installed windows on. i have another 500gb internal drive which is empty and am wondering whether i should install photoshop on the 500gb drive and put the scratch disk on the SSD or the other way round.
View 4 Replies View Relatedhow an SSD differs from a regular hard drive, there is no drop in performance when your stratch disk is assigned to the same SSD containing your Photoshop app.. I heard this setup is much faster than the conventional setup of having your app and scratch disk on separate hard drives.
View 6 Replies View RelatedI have just built my new rig (Asus p9x79 pro, 32GB 1600Mhz DDR3, Intel 3820, old GTX285 1GB, Win7 pro.....many hard drives ) as I am working on a very big project producing 440x240cm200ppi digital drawings to be installed as lightbox artworks at the same size.
Â
My old system just could not cope with the demands I was putting on it as It only had 12gb RAM. I have two scratch disks set up x1 30gb SSD (dedicated) and x1 240gb SSD ( has other stuff on it with 75gb free ). I am also using Photoshop CS5 Extended (updated) with RAM usage set to 80% (23976).
Â
While I realise PS will still make use of the scratch disk despite the amount of RAM I was shocked to see the first drive (30gb) was almost full with 5gb space left when I loaded the PSB file with x9 layers. Looking at the meta data in Bridge it tells me the file size is 6.90GB with pixel dimensions of 34646x18898@200ppi. Windows reports that I am only using 20GB of my 32GB..
Â
Shouldn't PS be using more RAM before going to the slower reads on a SSD? Windows Task Manager tells me I have 8150 RAM cached, 12310 RAM Available and 4215 RAM Free. If Photoshop is not using the 12GB would it be wise to make a 9GB RAM DISK for an addition boost...not even sure if that would work, but, I hate the feeling of having all that RAM and 1/3 not being used.
I had to uninstall PS CS6. How can I re-install it without the disk (I have my serial number and receipt). I can't see where to download it on the Adobe website unless I want to purchase a new copy. It is for a Macbook Pro.
View 3 Replies View RelatedI added a second hard drive and would like to know how to best set it up for use as a scratch disk.
The default in the Plug-Ins & Scratch Disks dialogue box was:
First: Startup
Second: None
Third: None
Fourth: None
I'm wondering if I should change the first to the new drive or keep it as "startup" and add the new drive to second.
I have a Mac Pro, with more than one HD. When I try to assign the other drive as the Scratch disk, and relaunch PS, I get the dreaded "can't access disk". I then have to remove prefs. and my Scratch disk no longer appears.
View 2 Replies View RelatedI'm thinking about the getting the Intel 80gb MLC ssd drive for primary use as a scratch disk...I may get a SLC if I can justify the price...
Has anyone tried SSD's as a scratch disk. Any 'real world' experiences out there?
I am using Photoshop 6. Since I have loaded a picture from a floppy disk, Photoshop keeps searching the a:/ disk of my computer with almost every action I do (selecting a tool, opening the layer style window, selecting a layer, what ever)
Every time I hear the sound of the computrer searching for a floppy, that is not there, and see the light of the a: drive flickering.
It makes working with PS rather slow.
This only happens with PS not with other programs. And it continues after resetting the computer.
I recently bought Adobe Photoshop CS one-on-one book but the CD is missing. Can anyone help with this?
View 1 Replies View Relatedcan explain the process to make a scratch disk for Photoshop cs3.I have a graphics company and bought cs3 it is working well but i am going to add another disk in my computer for this and need info to set this disk up.
View 2 Replies View Relatedmy computer got a lil virus, I had to system restore. Virus gone, BUT, seems as though my Photoshop kind of reset itself. Becuase when I opened it, the template was different (I used to have only 2 windows on the right, it reset itself to open with 4 windows) and when I used to create a new file the background was the transparent checkered pattern, and now it's just a plan white background, so something obviously reset.
THat's cool, no problem there. So I go to create a new photo, and I use a VERY simple too, I use the Paint Bucket to fill a 500x500 image, Photoshop has a lilttle load bar come up so it can LOAD to fill my little space, and if i let it sit, it will eventually say "Scratch Disk is Full".
Now, I've gone online to see how to fix that. I've found multiple FAQ sites. And this is what I've done to still no avail:
1. I've gone into Preferences and set the Scratch Disk location to my C:// drive that it previously was.
2. Set it so that 100% of my RAM can be used for Photoshop
3. Defragmented my C:// Drive
4. Searched for any ~PSD temp files, my computer said it found none.
When I attempt to load photoshop,
A pop up box appears saying that the selected scratch disks are almost full,
and there are 4 drop down boxes: First, Second, Third, Fourth.
With the "First", with either Startup or C drive selected, photoshop won't load.
This pop up box has never appeared before.
So, when I press ok on this box, photoshop continues to load for a few seconds then it states that it cannot continue loading because there was an error that it couldn't recover from!
There are no PST temporary files located on my computer,
And it isn't the "working with large image" problem because I don't even GET to open photoshop in the first place!
I am now working with 10megapixel images, just basic post processing i.e. saturation, curves, and sharpening.
My question is as follows.
I have a 1.6ghz dell laptop, with 1gb ram, and 80gb hd with about 32gb free.
Sometimes when batch processing (50 to 100 photos) at once, Ill get the scratch disk full error. I know its not a good idea to have the scratch and OS on the same drive, but not much I can do about it. I'm thinking about getting another gig of ram to bring me up to a total of 2gb, and a 500gb external hard drive. I can move the photos (about 20gigs worth) to the external, then i'd have about 50gigs free on my internal. I know an external is not the best for scratch, but again it will only be if I use the 50gb on my internal first. I will eventually have to get another HD anyway for these huge images.
So will a total of 2gb ram, 50gigs free on internal for primary scratch, and the remainder of my 500gb external for secondary scratch, give me a noticeable improvement?
I am getting a "Scratch disk almost full" message when I start up PS.
I'm using v7.0 on XP.
The first disk offers me the option of C:/ or Startup.
When I select startup it complains its almost full but I can't find out where it is so I can empty it!
If I select C:/ it complains about sharing with windows and I don't know how to offer any further alternative.
How much hard drive space should be allocated to photoshop? We are working with files at times exceeding 6GB. We have 32GB of RAM and a few hard drives, internal and external. Second: the size of my Documents folder is no more than 250gb and the capacity of the system hard drive is 500. What else could possibly take up so much room? the programs take up about 50gb so im left with 200 missing GB?
View 6 Replies View RelatedIs it possible that there could be a coorelation between heavy useage of Photoshop and the fragmentation of a hard drive on a Windows platform? I've experienced some problems with my day-to-day computer tasks and I'm trying to pinpoint the problems. I surely hope this question doesn't sound too vague, and I thank you for any light you might shed on whether Photoshop could be a problem with disk defragmentation.
View 4 Replies View Relatedwhich is the optimum location for photoshop scratch disk? startup disk or external disk. use imac i7,mountain lion.
View 5 Replies View RelatedSystem specs:
MacPro3,1
2 x 2.8 GHz Quad-Core Intel Xeon
OS 10.6.8
18 GB RAM
NVIDIA GeForce 8800GT graphics card
Photoshop 12.1 x 64
Â
So I just purchased and installed my first copy of an Adobe Suite and now I can't print. Back story: I had CS4 on my machine from my last job and it printed fine. When I lost my job, I went the legit route and installed the demo for CS 6 until I was able to aquire my own copy. CS 6 also printed fine.
I found a version on eBay of CS 5.5 and was eager to install. Yes, it is a full legit version with original disc and packaging; the seller even went so far as to have the liscence transfered over to me. I used the "AdobeCreativeSuiteCleanerTool" to remove all previous versions before doing a clean install of CS 5.5. Everything else in the suite seems to be running normally except printing.
Â
I've looked on the forums and tried several of their suggestions to no avail:
1) I tried changing the "Color Handling" in the print options box.
2) I tired running it in 32 bit mode.
3) I tried fixing permissions.
4) I trashed my preferences and tried the Shift-Option-Command trick
5) I updated the Adobe software (no updates for Photoshop)
6) I reinstalled my printer drivers.
Â
I just printed last night from CS 6 and now no luck today.
I am on OSX10.6.8 with CS4 and CS5 (some of my actions only run on CS4, so I quit and launch back and forth).
Â
I had my CS 4 and 5 Scratch Prefs set to a specific scratch partition on another local disk where I had a small partition dedicated towards it. I was doing some disk maintenance on that other disk and forget to go into CS and reset the scratch to the start-up disk. Now I cannot open CS4 or CS5 because it is looking for a scratch disk that does not exist.
Â
Is a complete re-install the only fix, or is there a command line or other way other way than a complete re-install?
I only hav the serial number, no disk
View 1 Replies View RelatedI've buy a new computer with and SSD Disk for SO (Winwos 7 Ultimate) and a Secondary Disk. How is the best choise to install the CS4 Suite (Photoshop, Dreamweaver etc)? Installing on primary disk (SSD) or on secondary disk?
View 2 Replies View RelatedSetup:
- Photoshop CS6 13.0.4 (64bit)
- MBP 15" retina (2,3Ghz intel Core i7)
- OSX 10.8.5
Â
I create designs for a websites. I work only on one file at a time. A real life example: 83MB in size and 2400X6000 in dimension. When I open the file and start editing, within minutes, all my RAM is used, plus my scratch disk uses a whopping 55GB. This is all the free space I have on a total of 200GB. Often, mac Finder crashes, so a hard reset is needed.
Â
I'm fully aware that a scratch disk can use a lot more then my 55GB. But, I don't do image editing, what I think is a large scratch disk user. And, I used to work with CS4 on an older mac with only 8GB of ram, and I never got a message about my scratch disk.
I have Photoshop CS6, I upgraded from Windows 7 to Windows 8 (both x64). I use the RAM disk as a scratch disk (16 GB RAM total, 4GB RAM disk). When I use filter liquify, Photoshop crashed. I tried two RAM disks and both have the same behavior. In Windows 7 it worked good. I have final version of Windows 8 from MSDN, no beta.
View 2 Replies View RelatedI'm trying to set up a time lapse project at work using CS5 and extendscript. I'm getting a scratch disk full error, only when I run the script. I do need to know where PS saves the scratch disk info, as my company limits my access to computer folders, so if PS is trying to write directly to the c drive, it might be getting blocked. If I know where the info is being written, I can make sure I have access. why I'm not getting the error message when not using the script. Just a simple resize throws the error.
View 8 Replies View Related