i've seen lots of t-shirts out there with a blurry text that really messes with your eyes. i've checked a few action download locations but haven't been able to find one yet. i've attached an example of a shirt with the blurred text.
the problem is that it can't be just a regular blur, since it's silkscreened. i think it ends up being a bunch of lines or dots in the text to create the effect.
Why is there a difference between the text from the soft fx and the text in action? If you look at the attached picture, the 3 lines look slightly different although they shouldn't. The first line was written inside the soft fx.
The second line, with an ugly outline, is the 3D text, and although it's the same font, it looks thinner here.
And the third line, which I think looks a little too soft, is with AA turned on in action.
So why can't I achieve the same look in action, as in the text soft fx?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I’m trying to create an action to resize my images, convert to rgb, add some copyright text and save it. The problem is when it gets to the text part it stacks the text one letter on top of another. Very frustrating...
I have a powerbook 1.33ghz with osx 10.3.8 running Photoshop CS. I tried all the usual suspects (pref, plist, fonts,info window, reset tools, etc...) I then created a new Mac OS account, downloaded a trial version of PS so it was completely fresh (except for my computer’s OS) I then created a new action in the new PS with the new account. Same thing the text stacked (This is just the action, the type tool after it is reset works fine.)
I then whipped out my credit card and called adobe (not happy about not being able to fix it myself.) $39 dollars later, I talk to a very nice tech support guy. We isolated the problem down, created a new action with the default text settings ‘typing the word “test” in the middle of the image.’ I then ran this on one of my images, same thing text stacked. I then created a new blank document (5x7 at 300ppi) and ran the action, this time it worked. While the tech guy went to ask someone else a question, I made a new document that was 600ppi, not 300ppi, and ran the action, the text was stacked. When I told the tech support guy this, he tried it on his computer and had the same results. I asked what to do and the tech support guy said I should use two actions one to resize and one to add text. That stinks, I regularly work on hundreds of files at a time and running multiple actions on the same files is very time consuming.
I have a folder of about 500 photos that were scanned in from old prints (my wife's faimily) of avarious sizes. I would like to write a Photoshop action that will add a border (half an inch) at the bottom if each and print the contents of the "description" field from the file info box in it. Any one have any idea about how to accomplish this?
View 2 Replies View RelatedI use an action to add a standard copyright notice which I want to update from 2008 to 2009.
I have tried exporting the action and changing 2008 to 2009 in a text editor and then re-importing the action. The result is that the action palette shows the new year, but the result of running the action is still 2008.
Is there a neat way to make minor adjustments to text in actions, or do I have to re-record that part of the action over again?
I have a folder of about 500 photos that were scanned in from old prints (my wife's faimily) of various sizes. I would like to add a white border at the bottom of each photo and print the text from the description field of the file info box in it.
View 2 Replies View RelatedI'd like to save certain action attributes as text to archive along with adjustment files for archived image group adjustments. how to copy this to clipboard as text?
View 8 Replies View Relatedi think it's really hard for me but i have to change the text (Vvcvvcv....) in a Make text layer action.What is the best way using the action palette?
View 4 Replies View RelatedAnyway, my quest is to create an action in CS3 that will position and size text (eg. center) as a watermark in any size image. Currently I am creating a copyright symbol, then a text layer and then another text layer and either grouping them in the action or merging them down as created to be in one layer. This works fine as long as I run the action on another file of the same size but when it comes across a different size file the components are all over the place and differently sized.
I gotta admit I don't know a lot about text though. Just thought someone may be able to help me with this one so thanks to all who contribute.
I wanted to add effects to text. The "help" feature said that the easiest way is to use the text effects in the Action palette.
The instructions were very sketchy. I tried, and didn't see any effect, so I closed that particular file and went on to something else.
Well, I guess I did SOMETHING, because now those effects seem to be permanently stuck ON. I've tried everything that I can think of. I even deleted all effects from the Actions palette (apparently you can restore the defaults later.) No effect!
The effects that are haunting me are "rippling water" and a shadow. Also, if I click anywhere in a .gif with the text tool, instead of creating a new text layer, it "highlights" the entire image.
What can I do?
I want to create an action where I create a stop, add text (patient's name for medical photos) which is automatically formatted to my preference of font size, color, etc. I can then hit the action play button to run the remainder of the action command, which will join and size photos from different files for printing. I can do everything but add the patient's name.
View 3 Replies View RelatedIt makes the text look like it's on a blueprint.
View 1 Replies View RelatedIs there a way to create an action in PS CS3 with the ability to type different words in the middle of the action?
For ex, I have a series of steps, then need to save the image to 2 different sizes/resolutions, with a different name. So I want the action to run, stop where I type in the name for the hi-res, continue, then stop where I type in the name for the lo-res, then finish the steps desired.
I want to prepare mutliple images for press release, that include a small border wtih copyright information.  Simply every photo i work on must be submitted with a small border and the same text indicating copyright on all of them.
I import from light room and use a batch action to create the border.  Thats simple enough, is it possilbe to create an action or script so that can i drop in a text layer into each of the images without a manually copying the layer text and pasting it into each file ... one at a time .Â
I'm creating a few PS actions and I wrote a piece of text that I want to show by a "insert stop" rule at the begining of every action.
Â
Problem is this: when I copy the text (from TextEdit) and go to the dialogue box on Photoshop, text simply doesn't paste. If i have to write it on every single action it will be a neverending work!
I am trying to record an action in Illustrator, and most steps work, except when I decide to create a new text layer, I select the type tool, type something into my document, and select another tool to complete the operation, nothing shows up in the action panel, it's as if Illustrator didn't see it. It works fine in Photoshop though.
View 8 Replies View RelatedI'm trying to record an Action in AI that, when editing text,
(1) goes to the end of the current line ([End]),
(2) goes to the beginning of the current line while selecting the text ([Shift]+[Home]),
(3) applies a swatch,
(4) moves down three lines ([Down], [Down], [Down]), etc.
When I record this in an action, only the Apply Swatch command appears in the Action. Is this just how-it-is or is there a way to record text navigation in an action?
I'm using Animate to create a lesson/course and I would like to be able to click on a word in the text and have a new text box open with a definition/explanation of the word clicked. Is there a way to do that in Animate? I haven't been able to figure it out.
View 3 Replies View Related i work at a small structural firm and am about the most experienced cad user here, which isn't saying much. Â I have never wrote any LISP's or anything, but have created many dynamic blocks and have edited some programing my boss got from a previous employee for adding dropdown menus with blocks/layers/etc. Â Just so you know my level of knowledge when it comes to answering my question. Also I am limited to using 2009 but other co-workers have up to 2013 so i would like this to work for all users. And i have done a bit of research but based on everyone elses level of knowledge am finding a lot of conflicting info and solutions that, to me, are in another language.
So I have a table that is created using polylines and text. Â It's a funky shape and AutoCAD's tables are a pain for it. i have created a dynamic block where i can array the rows down and the columns left. Â The issue is, i would like the test to come with each row, but still be editable once the block is done. Â I have figured out if row one is composed of 5 columns of text put into a single attribute, it is fine. But once you use the array action, to say 3 rows (including now 3 sets of attributes) they are not editable. Â So what is the work around, if there is indeed a work around? Â
the two option i see are to only array the rows and columns and left the text outside that block and manually copy it done to how ever many rows the user needs.... Â Or to have 2 blocks come in together, one as described before, and the other which just arrays the text and then i explode it to edit each line.. but then if you later choose to addd another line you would be left with doing that manually anyway..Â
Is it possible to do a break in the 3D text module from action? Or do I have to create 2 3D text, if I want to have text in different lines?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
a look at 3d text integration techniques inside of action [URL]....
View 2 Replies View RelatedI'm doing a simple 3D text move in Action and I want to layer it on top of my timeline. After rendering the layers in the timeline, it seems that my matte is messed-up (see attached).
View 2 Replies View RelatedSure wish you could manipulate the Column Offset of an Array Action with a Stretch Action.
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS
I am a screen printer and I print my separations from Photoshop. I routinely work with multi channel files or RGB files with additional spot color channels. I have created actions to place my registration marks, re-size images, etc to get ready to print but I manually have to create the text labels for each screen if they are missing from the original artwork.
The files I work with have channels named as "Base White, Red, Green, 284 Blue" etc indicating the ink color. What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
I am not sure if this is even possible, and I am limited on my knowledge when it comes to actions and have pretty much got lucky in the past getting them to do what I want without unnecessary steps.
On my registration target action it creates a new channel with each individual reg mark then combines them into one separate channel in which I just copy the contents and select all the ink channels and fill with black to make them appear, i'm happy with the steps it takes as it isn't too much trouble and if this could do the same with labels I would be happy with that.
i am trying to build an action where the end product is a channel listing that has all the channel (R-G-B-L-C-Y-M-K (forget LAB a-b)). this will allow me to look at all the channels for contrast and subsequent extraction. i'm actually able to do this as i RECORD the action. but when i RUN the action, nothing happens.
in recording the action, i create a DUPLICATE IMAGE, then convert the new image to LAB. i then drag the "L" channel to the original image. it goes into the original image as an alpha channel which i rename to "Lightness." i then convert the duplicate image to CMYK and then one-by-one DRAG the individual channels to the original image. at the end of this process, i have all eight channels visible in the channels palette. this is what i want.
but then, when i RUN the action on a new image, the action fails to RECORD the "drag step and drop" step. the "L," "C," etc. channels are not dragged during the running of the action.
why does the "drag" step not record in the action
needs to overlay a grid over a photo and then save it as another file. In CS5.5 or earlier, no problem, but in CS6 it is not working for either of us.Â
The batch action (run from either Photoshop or Bridge) stops and prompts at the Save command every time no matter what format we save it in (psd, png, jpg, save for web, etc.).
I have been through the Web and the Adobe Forums and cannot find a work around for this. He cannot just hit enter everytime the popup window comes up because he has over 2700 photos to put this grid on.
I have downloaded a free page curl action for Photoshop CS5. Is there an easy way to run it without all the steps i.e. with one click if my image size is constant?
View 3 Replies View RelatedI was running an action on several hundred images and occasionally a notice would pop up saying 'Action Not Available', but it was still working. Anyone seen this and know why?
View 9 Replies View RelatedI had an action which I used a lot. It put a horizontal and vertical guide
on the center of my canvas.
Unfortunately I lost my hdd and did not have a backup copy of this action. I have searched as good as I could bu cannot find anything.
Last year I made X-mas cards and would put a barcode on the back for a realistic look. I used to have an action that I downloaded before that did the barcodes, but I some how lost it.
View 1 Replies View RelatedHue/Saturation and Brightnesss/Contrast are steps in my Action. I always pause the action so that i can put in unique paramenters for each image. But before i get to the actual H/S or B/C action, a "New Layer" dialogue box pops up first. I never name the new layer so this is a wasted dialogue. is there a way to skip this step and pause only in the H/S or B/C step itself? I am trying to streamline my workflow by eliminating useless steps.
View 8 Replies View Related