is there a way to do that
i got some macintosh psd and i want to import these psd that were made on mac to pc
if i open them on my pc photoshop say the files are not in right format
is there a way
also i can not see the simple jpeg files made on mac
I've been using my trial of Photoshop CS6 Extended for 10 days now. I have run into a peculiar problem - when saving a file Photoshop does not display any sort of icon. No thumbnail, no generic, nothing. It's not a huge problem, I can always open the image but not by double-clicking on the icon: it's just not there.
View 654 Replies View RelatedI downloaded a sweet font FFXSpiran.ttf. As we all know, Macontosh reads dfont and so on.
Well, magically, the font works great in Painter IX, but will not show up in PSCS. I used my FontBook to disable quite a few fonts(that's what they said to do at Adobe.Com), well, it didn't work, or I wouldn't be here.
I can select it from the font menu in the program, but when I go to type anything, it's blank. When I move away from the text layer, it will display the letters I typed, but it's still blank. It's quite frustrating.
i have been trying to create mac desktop icons using the "Photoshop PICT Resource File" and it works all right, but i lose any transparency one the image is saved.
I have tried using various icon programs (IconBuilder, etc) but they never seem to work for me.
Since i am on a Mac, standerd icon programs just dont cut it, because im looking to create high-quality icons like those found on Pixel Girl (a great resource for both Mac + Windows Icons).
I am far from a beginner, but i can't seem to find any tutuorials that apply to this topic.
I had to do a clean install (Archive and Install) recently on my Macintosh (450 MHz PowerPC G4, 1.25 GB SDRAM, OSX 10.4.11) and found afterwards that the drag-and-drop capabilities of Photoshop (CS2, version 9.0.2) were no longer available. In addition to this,
I'm now not able to edit original graphics in Photoshop through the links palette in InDesign (CS2, version 4.0.5). I've searched through the Previous System folder that Archive and Install left, but don't know enough to recognize the software component(s) necessary to solve this problem.
Take action to make Kodak Plug Ins possible for Macintosh CS6.Aparently, they are unable to integrate them into the new version of Photoshop without your participation.
be aware that our Plug-Ins are 32-bit. CS5 allowed for our Plug-Ins to be installed in 32-bit mode on the Mac, but this was not offered for CS6. You might check with Adobe to see if they will offer this in future.We are currently evaluating the possibility of updating our Kodak Professional Image Enhancement Plug-Ins to 64-bit, but have no definite plans as of now. Please periodically visit our website for any updates to our plug-in availability.
PSE 11. Saved pictures appear pixelated in icon view of a folder. Saved in JPEG. Original JPEG picture not pixelated.
View 12 Replies View RelatedCan I rename my Macintosh HD Hard Drive? I had a recent problem with After Effects not loading. It's a brand new iMac and had a clean install of Adobe Production Premium CS6. I do have a few plugins installed that I purchased from Video Co-Pilot and Mocha AE. But I can't imagine those plug-ins were the culprit. However, I did rename my Hard Drive prior to the not-loading problem.
Could renaming my Macintosh HD have had an effect on that?
how I can re-color images in Photoshop 3.0 on a Macintosh?
View 1 Replies View RelatedI receive an "Import failed" message when trying to import my iPhoto library to my trial version of PE11. I am running Mac OS X 10.7.5 and using iPhoto 11. I have tried 4 or 5 times now with the same result.
View 3 Replies View RelatedI'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
when I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I am an archaeologist working with survey equipment and Map3D for a few years but now I have the following problem.
When I import the shapefiles created in my leica/topcon equipment into Map3D (mapimport) there is the possibility to select which attributes are going to be imported with an import profile file (.ipf).
How do I create the above and save it so that I do not have to go through the same process again?
I can tell you cannot Gateway Import from a drive that is Read-Only. The clip seems to work, it just says pending render, of course when you import a large number of files it always says pending render. Unfortunately it never actually finishes pending render, and will list as failed in Backburner.
So you can for instance think you have relinked an entire timeline and start doing a fair amount of work on it, but you will then be unable to send this large timeline to your flame like you think.
There is no god damned reason it should allow you to gateway import something that you cannot actually gateway import. All it would need to do is check if the drive is read only before it does it and give you an error message IN THE APPLICATION. Rather than everything looking fine, but then making you go tease the meaning out of this from backburner:
smk001 1896942624 swBIOSubJobServer.C:298 01/21/12:18:14:05.450 1896942624 swBIOAdapter.C:403 01/21/12:18:14:06.504 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0.
Read-only file system on processing S+W server..The fact that the color correct house had randomly given me an NTFS drive this time didn't occur to me for quite awhile, since the last two were both macOS.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View RelatedI'm working on some graphics for my Hosting Reviews website. I've found an logo i'd like to adapt however it's a template in the format of .EDP which belongs to illustrator i beleive, i was wondering if there were any tools/addons which would allow me to use convert it to .PSD ?
View 1 Replies View RelatedI have a client who is sharing a CorelDRAW file with me, but I can't find a way to import it into Photoshop. I know Corel is for Vectors, and Photoshop is now, but I thought the .pdf format would be compatible... I managed to import one pdf, but the colours were very distorted. A larger file just wouldn't open at all.
View 4 Replies View Relatedokay so I bought a new mac it has OSX Lion, and I downloaded my Adobe Creative Suite CS4. The one hiccup and the only thing I used it for is edit gifs. When I go to file import - Video Frames to Layers is an option however I can not load a gif into the program. I tried * and everything is still greyed out.
I think it's missing a plugin. Adobe tells me to upgrade but you can't upgrade from CS4 to CS6 and the people at Mac tell me that even though my product isn't that old Adobe products can adapt fast enough. I want to know if there is a viable solution to what should be a simple problem or should I move on from Adobe because it is too expensive.
How do you import pictures into CS6 from your computer picture files?
View 10 Replies View RelatedI have a problem importing some .3ds files into my Photoshop CC on PC. The problem is that the layers seem to re-arrange themselves in 3D space. When opening the same file in Cinema 4D there is no problem. The looks flawless? Is there an import option that I have overlooked?
View 3 Replies View RelatedHow di i import my workspaces from CS6 to CC.
View 5 Replies View RelatedI try to import a video to Photoshop CC to turn it into a Gif, but when i try to import it, it comes up saying cannot import on this version of windows but the previous Photoshop was fine.
View 3 Replies View RelatedI'd like to ask something. Suppose I've thousands of files of psd jpg and txt files which can be paired by names like x.psd x.jpg and x.txt. I'd like to import x.txt and x.jpg into x.psd as new layers. a default position for layers are enough for all files.
Can I do this for all files?
I think the title speaks for itself. Someone has sent me an Illustrator file CS6. I open it in AI CS6 and can see all the layers. I don't use AI much (newbie) and want to sub an image and add another layer in PS (CS6).
I export the file, with all layers intact, as a PSD. I have the "write layers" and "preserve text editability" and "maximum editability" checked. I then drag into PS and the image is there as a single layer only. I've reviewed a video tutorial and appear to be doing exactly what is shown (except his opens up showing layers).
I keep getting a message that I need administrator access
View 2 Replies View RelatedWhen I import sound (mp3) into a Photoshop document, I can't hear it in Photoshop CC (Timeline). When I do the same with Photoshop CS6, I hear the imported sound-file. Is this a bug or an option which isn't activated?
View 2 Replies View Related
