Here's my case, I need to calculate how many colors used in the image and then extract each of them as a new layer(or new file) which means each layer/file contains each distinct color whatever the image is (might be a true color image or 256 colors), this bothers me a lot, how to do it in ps
View 9 RepliesI want to cut two faces out of one picture and place them into another picture onto two different peoplles bodies. I used the extract tool and got them there, used transform to make heads bigger(they distort and get fuzzy) and also the skin tones on the faces are way lighter than the bodies in 2nd picture.
View 1 Replies View RelatedI recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
Â
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
Â
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
i have a picture of a car and i would like to take some parts of the background out but not all of its how can i do its, i have tryed using Filter>Extract but it dosnt seem to work, and i read on a site that i can use Crop tool but i am not familuar with that tool is their another way to do this.
View 2 Replies View Relatedhow to extract the background of a .gif in PS7.
View 1 Replies View RelatedHow can you extract objects for the foreground?
I have a picture and something is in front of the picture and I want extract the object without destroying or damaging the picture.
need to be able to extract the metadata that is displayed in Bridhge and CS from *.pdf and raw files so I can use it in my website to power image selections and various other tasks.
I need the file name and the metadata for each file. Ipresume the data is stored somehow in Bridge -- how can I get it exported into a comma delimited text file?
I downloaded a text, and it needs extraction. could someone tell me where to extract it so i could use it in ps?
View 1 Replies View RelatedI'm still getting adjusted to PS 7 and I was wondering if anyone knows what happened to the Image > Extract command? Is it still there, but somewhere else or what? I loved that feature in PS 6 and it seemed so quick and easy. I've just used the crop tool in PS 7, but I'm just curious to know if the Extract command is still in PS 7 or not.
View 3 Replies View Relatedhow to extract an image from the background, and also use that image without the background. I have extracted, but when I try to use that image elsewhere, powerpoint, it has a white background. Is there a way to do this and to have no background color?
View 2 Replies View Relatedi would like to extract the charecter properly with the lasso, but it is a hard task, because of the head mixed with the text, how could I do ?
View 2 Replies View RelatedI have an image that I would liked to get the shape from and enlarge to 24" (that is not the full-res image.). I am trying to extract the rings along with the torch, meanwhile making that pattern black and the background white. I can use the magic wand at certain tolerances to get it out, but, like the picture, the edges are not sharp, but pixelated. is there a way I can extract this shape but have very smooth and defined edges, even if the picture does not have them? im trying not to have to zoom in real far and use the lasso to outline the entire thing myself.
I might add that extract edges doesn't work too well on this image
I have that picture and would like to extract both logos and enlarge them. I tried using magic wand but it was hard. Plus a lot of the lines are not very straight.
View 3 Replies View RelatedIm trying to cut out the background in a image, im actually trying to cut out the green screen background but when I do with the magic tool it either cuts out some of the person arm or something, or it would still be some green in the the image.
View 4 Replies View RelatedI have the attached image from which I am trying to produce a logo, eventually exporting it to illustrator. I have retaken the photo of the charcoal drawing so it is placed on the same paper it was drawn on and have managed to get a reasonable amount of space on the right hand edge but the left hand edge is proving beyond me. As there are so many greys and light greys, it is proving impossible to get a good selection. When I place the logo in my wordpress site it looks awful on the right hand edge.
View 2 Replies View Relatedi m making a 3d model of landscape design, i need some trees from photographs for visualization purposes in elevations. however it's not possible to extract them from a photograph neatly using extract tool from filter. how can i do a nice extraction?
View 2 Replies View Relatedhow you extract a still frame from a video file in Photoshop CS6.
View 1 Replies View RelatedIs it possible to extract raw luminance values from raw image files? Actually, a de-Bayerized flat matrix would be ideal but could (? maybe) deal with a 3 layer RGB matrix -- rather like the output from dcraw, only in PS. Preferably without gamma applied.
Â
What I'd like to do: I'd like to use image stacking for exposure accumulation using "summation" but find that highlights blow out readily. Right now the workaround is to let the highlights go and bring them back with HDR from one (or more) of the original frames, but that's seriously clunky. I'd like a "scaled summation" where a luminance-dependent scaling factor is applied in the sum. I don't yet know how to get there from here in PS (there's a megaclunky way involving dcraw, Matlab, and a stacking program ...), but it seems to me that the first step is to get the luminance info.
I am planning to order a custom iphone case engraved with this image:
Obviously I am only interested to extract the words from the image itself.
Luxe plates (the company I am ordering from) wants a simple engravable image from this photo.
What operations should I perform to extract the text only from this photo?
I want the end result to look simple enough to be engraved by a laser printer.
I'm trying to get rid of the excess background in this photo. It's kind of an orange color if you see what I'm talking about. The hair is especially difficult. I've tried the extract tool but haven't had much luck with it.
View 8 Replies View RelatedThe download completed successfully. But when I tried to extract the files, I got the same error others have encountered, with a message stating that I lack write permissions or sufficient free disk space. Neither one is an issue. Running Vista x64, SP1, and all latest patches. Simply trying to extract to c:emp. That is a directory I regularly use for extracting files to an launching installations. The directory was empty before I started this process. Have not had any issues on this machine with CS3 or Lightroom. I deleted the files that were extracted, and deleted the downloaded files, and started over. I got the same error. I then used Winzip to try extracting manually. After successfully extracting a large number of files, Winzip encounters this error: ...
View 7 Replies View RelatedI took a photo for a family Christmas card, and am trying to make the card on Photoshop. This question will prove what an amateur I really am, but I am having trouble with layers. When I change the size or format of one layer, all of the layers change as well.
I can't seperate what I do on one layer from the next. Can someone please help me with this? Also; I can't change the size of my photo to fit it on the other layer. How do I change the background layer from the photo to the background I want?
I would like to make an animated signature of a guy dribbling across the sig. i was planing to extract him from the frames one by one (boring).
View 2 Replies View RelatedI scanned an image and would like to use only the dark lines as a faded out background image. How do I extract only the black lines of the image? Or in other words how do I make the .jpg only show black and white colors and then be savable. The image is essentially a complex stick figure. The only problem is the background is a reddish color.
View 1 Replies View Relatedneed exctract object from background. What the best method for specific case? just tried Quck Mask, but without success due weak and unclear tutorial, plus take too many time fill large area with small #19 brush.
View 9 Replies View Relatedhow to SMOOTHLY EXTRACT the models and place them on the blue background.
As you can see from my attempt its not working.
my edges are too hard and not believable at all.
using Photoshop CS, wanting to "pull out" an image found on a layer within a template sold me for a web site. I am familiar with another program - and would like to pull the picture off of a layer to put into the other program I am familiar with - copy the outline of the image, then paste the mask onto another photo , allowing me then to replace the original template photo with my own. Any way to access just the one image found on that particular layer?
View 1 Replies View RelatedWhen I opened the file in Photoshop I think it was converted to a CYMK (I have no idea what that means...)file.
Anyway, so now I can see the logos on the .ai file but how do I extract them from that file so I can use them in my own design???
It seems like they're fixed on that layer...I can't move them around or copy/paste them...
I’m trying to cut my pictures with a mask to make a selection but it looks kinda bad and takes too much time. The pen tool is hard to use if anyone has any suggestions on how to cut pictures,
View 5 Replies View RelatedThe colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.