A routine thing I do to photographs is to whiten teeth. To do this, I lasso the teeth, desaturate and then lighten them.
I'd like to create a brush with desaturate and lighten abilities so that I can choose that brush and then "swab" it over the teeth. This would save me a lot of time.
I'm staring at two pictures, one in photoshop and another of the exact same photograph I saved into JPG...and the red color of the JPG file is desaturated quite a bit compared to that open in Photoshop. When I close everything out and reopen the jpg file in Photoshop it's saturated again.
View 8 Replies View RelatedI have a PSD file that was submitted by a customer. It is layered. They have a background image that is grey in colour, but they have built the layer as a CMYK grey, instead of a black only grey. I have turned off all of the other layers, and gone to Edit > Adjustment > Desaturate, it does nothing. So then I extracted that layer into a new document, made it a grayscale image, pasted back in, and it separates it to CMYK.
View 4 Replies View RelatedFill new layer with render Clouds
Put Picture over clouds, and set to hue.
But, that can't be right because my picture turns into a block of gray.
where the picture would take on the color of the rendered clouds or effect. And the white background would too. So basically, I'd have a banner that was filled with the rendered effect completely, even over the pictures, yet I'd still be able to see clearly the picture, effect and everything
I want to desaturate this pic and add some blending things like I do on most pics but I want to keep the eyes blue. I went into quick mask mode...but I cannot make it look natural.
View 4 Replies View RelatedMy desaturate option in Gimp is NOT working when I use it on a .png file!!! the mode IS RGB but still IS NOT working!
EDIT: I just found out my de saturate is NOT working for ANY image no matter what the image or mode is!
Say for example *cough cough* I have a photo of a kid wearing a santa hat. How would I turn the rest of the photo black and white (well, grayscale) while leaving the hat's red color alone? Seems to me there should be an easier way than masking off the area, duplicating as a new object and then desaturating the background. But is there?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View Relatedyou can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies View RelatedWhen i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i don't see a soft brush from a non soft brush.
View 2 Replies View RelatedThe brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
View 1 Replies View RelatedThere are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies View Relatedthe brush, stamp brush and eraser tools are giving me a hard time the actual working area from the tool is so much smaller than the outside frame of it URL....
i'm using cs6.the picture i'm working with was enlarged to 400%.the brush, stamp brush tool was at size: 12px, hardness 100%.opacity 100%
in the presettings i saw the brush was set to normal size.also i played with the jitter sizes, to no avail.
When I use the Adjustment Brush in Camera Raw it frequently just gives me a pin instead of a brush. How can I fix this? I'm on a Mac in Snow Leopard.
View 4 Replies View RelatedI tried defining a new brush but the sample doesn't recognize color and texture. Is there a way of sampling a small piece of a drawing and making a brush out of it? With the multi colors of the sample?
View 3 Replies View RelatedWhen I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
View 3 Replies View RelatedHi, I'm having some issues with my brush. It won't brush any other color, I select different colors on "set foreground" and "set background" colors and no matter what I select it brushes white. Does anyone know why?
View 2 Replies View Relatedthe size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies View RelatedI'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies View RelatedI'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
When I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...etc
I cant seem to undone it... even if i restart program
I recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)
From the Brush Presets Panel, I choose Basic Brushes from the drop down menu. Then Replace. The new choice of brushes appear in the Brush Panel and in the Brush Presets Panel.
But in the Brush Panel, additional brushes appear.
There are always more brushes in the Brush Panel than the Brush Presets Panel whenever I Replace. The Brushes Preset Manager is populated with identical brushes as the Brush Presets Panel. What determines the additional brushes that appear in the Brush Panel?
I'm comparing the CS5 & CS6 mixer brush, with moist, light mix, right now...At first I wondered why the CS6 mixer brush was slower, until I realized that it looks like the actual brush stroke in CS6 is more advanced. The CS6 stroke looks like it's calculating the overlapping brush strokes & it's interaction with the texture more accurately to real life.
I haven't read any articles on improvements to the CS6 mixer brush. Has it actually improved or are my settings just different in CS6 from CS5? since I'll probably need to work with "Sample All Layers" unchecked when working with the CS6 mixer brush.
When using the brush tool, I'm getting a weird X as the brush tip. It's not the crosshairs that happens when Caps Lock is on, but it's more like two curved lines forming an X. I can't find where my brush edges are when this happens. It's a real pain!
Here's a picture of the crosshairs. How to turn it off? I'm using CS6 and running Windows 7 Pro 64-Bit.
I'm experiencing some brush lag, but not at first. When I open Photoshop, there's no lag at all. But, sure enough, as soon as I begin to work for 15 or so minutes, I begin to get brush lag that gets worse as times goes on. Restarting the program fixes the lag temporarily until it happens again shortly after. I'm using Photoshop CS5.1. I've already given Photoshop 100% of my CPU.
View 5 Replies View Relatedwanted to know what kind of brush is used here and how did he make the text 3D?
Whats the brush used here and how did he made it 3D? [URL]....